LuxPower LP-BL300

Руководство пользователя набора фонарей для велосипеда LuxPower

Model: LP-BL300

1. Продукт закончилсяview

Thank you for choosing the LuxPower Bike Light Set. This set includes a powerful 300-lumen LED headlight and a bright LED taillight, designed to enhance your visibility and safety during cycling. Both lights are rechargeable and water-resistant, making them ideal for various riding conditions.

LuxPower Bike Light Set, showing the black headlight with a clear lens and the rectangular taillight with multiple LEDs.

Image 1.1: The LuxPower Bike Light Set, featuring the main headlight unit and the compact taillight unit.

2. Содержимое упаковки

Пожалуйста, убедитесь, что все перечисленные ниже предметы включены в ваш пакет:

  • 1 x LuxPower LED Headlight (300 Lumens)
  • 1 x LuxPower LED Taillight
  • 2 х USB-кабель для зарядки
  • 1 x Headlight Mounting Bracket
  • 1 x Taillight Mounting Strap
  • 1 х Руководство пользователя
Contents of the LuxPower Bike Light Set package, including the headlight, taillight, two USB cables, and the user manual, all laid out next to the product box.

Image 2.1: All components included in the LuxPower Bike Light Set package.

3. Настройка и установка

3.1 Установка фар

  1. Attach the headlight mounting bracket to your bicycle's handlebar. Ensure it is securely fastened and positioned centrally.
  2. Slide the LuxPower headlight onto the bracket until it clicks into place.
  3. Отрегулируйте угол наклона фар, чтобы осветить дорогу впереди, не ослепляя встречный транспорт.
LuxPower headlight mounted on a bicycle handlebar, showing its position relative to the brake levers and shifters.

Image 3.1: The LuxPower headlight securely installed on a bicycle handlebar.

3.2 Установка задних фонарей

  1. Wrap the taillight mounting strap around your bicycle's seat post.
  2. Secure the strap firmly, ensuring the taillight is facing directly backward.
  3. Adjust the position to ensure maximum visibility from the rear.
LuxPower taillight mounted on a bicycle seat post, positioned below the saddle.

Image 3.2: The LuxPower taillight installed on a bicycle seat post.

4. Инструкция по эксплуатации

4.1 Включение/выключение питания

  • To turn on the light, press and hold the power button located on the top of the light unit for 2 seconds.
  • To turn off the light, press and hold the power button again for 2 seconds.

4.2 Выбор режима

После включения света кратковременно нажмите кнопку питания, чтобы переключаться между доступными режимами освещения:

  • Высокий: Maximum brightness for optimal visibility.
  • Середина: Сбалансированная яркость для общего использования.
  • Низкий: Сниженная яркость для увеличения времени работы от батареи.
  • Flash/Strobe: Режим мигания для повышения видимости в дневное время или для подачи сигналов в чрезвычайных ситуациях.

4.3 Зарядка фонарей

Both the headlight and taillight are USB rechargeable. Use the provided USB cables for charging.

  1. Locate the USB charging port on each light unit. It is typically covered by a rubber flap to protect against water.
  2. Осторожно откройте резиновую заслонку.
  3. Connect one end of the USB charging cable to the light's port and the other end to a USB power source (e.g., computer, wall adapter, power bank).
  4. The indicator light will show the charging status (e.g., red for charging, green or blue for fully charged).
  5. Once fully charged, disconnect the cable and firmly close the rubber flap to maintain water resistance.
Graphic showing both the headlight and taillight being charged via USB cables connected to a power source.

Image 4.1: Both the headlight and taillight are USB rechargeable.

Close-up of the LuxPower headlight connected to a USB cable for charging.

Image 4.2: The LuxPower headlight connected to a USB power source for charging.

Close-up of the LuxPower taillight connected to a USB cable for charging.

Image 4.3: The LuxPower taillight connected to a USB power source for charging.

5. Техническое обслуживание

  • Уборка: Протрите осветительные приборы мягкой тряпкой.amp Ткань. Не используйте абразивные чистящие средства или растворители.
  • Уход батареи: To prolong battery life, avoid fully discharging the lights frequently. Recharge them regularly, especially if they will be stored for an extended period.
  • Хранилище: Store the lights in a cool, dry place away from direct sunlight and extreme temperatures.
  • Водостойкость: Ensure the USB port rubber flap is always securely closed when not charging to maintain water resistance.

6. Поиск Неисправностей

ПроблемаВозможная причинаРешение
Свет не включается.Батарея разряжена.Зарядите фонарь с помощью прилагаемого USB-кабеля.
Свет не заряжается.Проблема связана с USB-кабелем или источником питания.Try a different USB cable or a different USB power source. Ensure the cable is fully inserted.
Свет неожиданно мерцает или тускнеет.Низкий заряд батареи.Зарядите свет.
Монтажный кронштейн кажется шатким.Bracket not tightened sufficiently.Ensure the bracket is securely tightened to the handlebar/seat post.

7. Технические характеристики

ОсобенностьСпецификация
БрендЛюксПауэр
Номер моделиLP-BL300
Яркость300 Lumens (Headlight)
Количество настроек4 (High, Medium, Low, Flash/Strobe)
МатериалНержавеющая сталь
Уровень водонепроницаемостиВодонепроницаемость (IPX6)
Тип крепленияHandlebar Mount (Headlight), Seat Post Mount (Taillight)
СКП755702029490

8. Гарантия и поддержка

LuxPower products are manufactured to high-quality standards. For information regarding warranty coverage, returns, or technical support, please refer to the contact information provided on the product packaging or visit the official LuxPower webсайт.

Сохраните чек о покупке для предъявления претензий по гарантии.

© 2023 LuxPower. All rights reserved.