ACDelco Professional 36-352271 Power Steering Gear Inlet Hose User Manual

Введение

This manual provides essential information for the proper installation, operation, and maintenance of your ACDelco Professional 36-352271 Power Steering Gear Inlet Hose. Please read this manual thoroughly before beginning any work to ensure safety and optimal performance of the component.

Информация по безопасности

Always prioritize safety when working on vehicle systems. Failure to follow safety precautions can result in personal injury or damage to the vehicle.

• Используйте соответствующие средства индивидуальной защиты (СИЗ), включая защитные очки и перчатки.
• Перед началом работ под автомобилем убедитесь, что он надежно установлен на домкратах.
• Allow the engine and power steering system to cool down before servicing to prevent burns.
• Power steering fluid is corrosive and can cause irritation. Avoid contact with skin and eyes.
• Dispose of old fluids and components responsibly according to local regulations.
• Если вы не уверены в каком-либо шаге, проконсультируйтесь с квалифицированным автомехаником.

Продукт болееview

The ACDelco Professional 36-352271 Power Steering Gear Inlet Hose is a premium aftermarket replacement component designed to transfer high-pressure power steering fluid from the power steering pump to the power steering gear or rack and pinion assembly. This assembly includes the necessary hoses, zinc or plated end fittings, and other components for a proper fit and function.

Изображение 1: ACDelco Professional 36-352271 Power Steering Gear Inlet Hose. This image displays the complete hose assembly, including the flexible hose section, metal fittings, and protective elements. Two small yellow O-rings are also visible, likely for sealing connections.

Основные характеристики:

• Silver Heat Guard: Helps protect the hose in high-temperature areas, enhancing durability.
• Fluid Restrictors: Designed to absorb vibration and reduce noise within the power steering system.
• Double-Lock Beading Tube End: Provides secure crimping and assists in preventing leaks at hose/coupling connections.
• Switch Sockets: Allows for the reinstallation of original equipment pressure sensors.
• End-Lock Tabs: Positions the hose for accurate alignment and routing during installation.

Настройка и установка

Proper installation is crucial for the performance and longevity of the power steering hose. Refer to your vehicle's specific service manual for detailed instructions and torque specifications.

Необходимые инструменты и материалы:

• Набор торцевых ключей/гаечных ключей
• Динамометрический ключ
• Поддон для сбора конденсата
• New Power Steering Fluid (compatible with your vehicle)
• Магазин тряпок
• Защитные очки и перчатки

Этапы установки:

1. Подготовка: Park the vehicle on a level surface, engage the parking brake, and allow the engine to cool. Raise the vehicle safely using a jack and secure it with jack stands.
2. Сливная жидкость: Place a drain pan beneath the power steering pump and gear. Carefully loosen the old power steering hose fittings to drain the fluid.
3. Снимите старый шланг: Disconnect the old hose completely from both the power steering pump and the steering gear. Note the routing of the old hose for correct installation of the new one.
4. Установите новый шланг: Carefully route the new ACDelco 36-352271 hose in the same manner as the original. Ensure there are no kinks or sharp bends.
5. Соединительные фитинги: Attach the new hose fittings to the power steering pump and steering gear. Hand-tighten first, then use a torque wrench to tighten to the manufacturer's specified torque. Ensure new O-rings are used where applicable.
6. Reinstall Sensors (if applicable): If the original hose had pressure sensors, transfer them to the new hose's switch sockets and tighten securely.
7. Система заправки: Lower the vehicle. Fill the power steering reservoir with the appropriate new power steering fluid to the "COLD" mark.
8. Bleed System: Start the engine and slowly turn the steering wheel from lock to lock several times. Check the fluid level and add more if necessary. Repeat until the fluid level stabilizes and no air bubbles are visible in the reservoir. The steering should feel smooth and quiet.
9. Окончательная проверка: Check all connections for leaks. Ensure the hose is clear of moving parts and hot surfaces.

Эксплуатационные соображения

After installation, the power steering system should operate smoothly and quietly. Pay attention to any unusual noises or changes in steering feel.

• Уровень жидкости: Regularly check the power steering fluid level, especially after initial installation and during routine maintenance.
• Ощущения от рулевого управления: The steering wheel should turn easily and consistently. Any stiffness, looseness, or grinding sounds may indicate an issue.
• Шум: A whining or groaning noise, particularly when turning the wheel, can indicate low fluid, air in the system, or a failing pump.

Обслуживание

Regular inspection and maintenance of your power steering system, including the hose, will help ensure its longevity and safe operation.

• Визуальный осмотр: Periodically inspect the power steering hose for signs of wear, cracks, bulges, or leaks. Check the fittings for tightness.
• Состояние жидкости: Check the power steering fluid for color and odor. Dark, burnt-smelling fluid indicates contamination and should be replaced.
• Уровень жидкости: Maintain the power steering fluid level between the "MIN" and "MAX" marks on the reservoir.
• Очистка системы: Consult your vehicle's service manual for recommended power steering fluid flush intervals.

Поиск неисправностей

This section addresses common issues related to power steering hoses and their potential solutions.

Если действия по устранению неполадок не помогли устранить проблему, рекомендуется обратиться за помощью к сертифицированному автомеханику.

Технические характеристики

Technical details for the ACDelco Professional 36-352271 Power Steering Gear Inlet Hose:

• Бренд: ACDelco
• Номер модели: 36-352271
• Материал: Zinc (fittings)
• Цвет: Silver (fittings)
• Вес товара: Примерно 15.8 унций (0.45 кг)
• Размеры продукта: Примерно 21.5 х 15.5 х 1.6 дюйма (54.6 х 39.4 х 4.1 см)
• OEM номер детали: 19311377
• СКП: 808709166757

Гарантия и поддержка

For specific warranty information regarding your ACDelco Professional 36-352271 Power Steering Gear Inlet Hose, please refer to the documentation included with your purchase or visit the official ACDelco webсайт. Условия гарантии могут отличаться.

For technical support or further assistance, please contact ACDelco customer service or consult an authorized ACDelco service center.

ACDelco Official Webсайт: www.acdelco.com