KEYSIGHT U1272A Handheld Digital Multimeter User Manual

1. Введение

This manual provides essential information for the safe and effective operation of the KEYSIGHT U1272A Handheld Digital Multimeter. The U1272A is a robust, 4.5-digit, water and dust resistant multimeter designed for professional use in various electrical measurement applications. It features an Organic LED display and intelligent functions to enhance productivity and safety.

2. Информация по технике безопасности

ПРЕДУПРЕЖДЕНИЕ:

• Всегда соблюдайте местные и национальные нормы безопасности.
• Do not use the multimeter if it appears damaged or is operating abnormally.
• Перед выполнением измерений убедитесь, что измерительные провода находятся в хорошем состоянии и правильно подключены.
• Соблюдайте все номинальные параметры терминала и максимальные входные значения.
• Этот продукт предназначен только для профессионального использования.

The U1272A is rated CAT IV 600V and CAT III 1000V, indicating its suitability for measurements in high-energy electrical environments. Always use appropriate personal protective equipment (PPE).

3. Продукт закончилсяview

The KEYSIGHT U1272A is designed for ergonomic handling and durability, featuring an IP54 rating for water and dust resistance.

Рисунок 3.1: Передний view of the U1272A multimeter, showing the OLED display, function dial, and input terminals.

Рисунок 3.2: Сторона view of the U1272A multimeter, highlighting its ergonomic, non-slip design.

Рисунок 3.3: Назад view of the U1272A multimeter, showing the battery compartment and stand.

Основные характеристики:

• 30,000 counts resolution with 0.7% for ACV accuracy.
• Organic LED (OLED) display for clear readings in various lighting conditions.
• Intelligent features like Low Pass Filter (LPF) for noise elimination and Qik-V for quick AC/DC voltage determination.
• Visual alert blinks in addition to the beeper for Continuity test in noisy environments.
• IP54 certified for water and dust resistance.
• Connectivity to PC/internal memory for logging up to 10,000 readings.

4. Настройка

4.1 Установка аккумулятора

The U1272A is powered by batteries. To install or replace batteries:

1. Ensure the multimeter is turned OFF and disconnect all test leads from the terminals.
2. Найдите крышку батарейного отсека на задней панели устройства (см. рисунок 3.3).
3. Открутите крепежные винты и аккуратно снимите крышку.
4. Insert new batteries, observing correct polarity (+/-) as indicated inside the compartment.
5. Установите крышку на место и закрепите ее винтами.

4.2 Первоначальное включение питания

After battery installation, turn the rotary switch to any function to power on the device. The OLED display will illuminate, and a self-test will be performed. If the display does not light up, check battery installation.

5. Инструкция по эксплуатации

5.1 Основные измерения

To perform basic measurements, select the desired function using the rotary switch and connect the test leads to the appropriate input terminals.

• Томtage Measurement (V~, V-): Connect the red lead to the VΩHz terminal and the black lead to the COM terminal. Select AC (V~) or DC (V-) voltage.
• Current Measurement (A, mA, µA): Connect the red lead to the appropriate current terminal (10A, 440mA, or µA) and the black lead to the COM terminal. Select the desired current range. Ensure the circuit is de-energized before connecting the multimeter in series.
• Измерение сопротивления (Ом): Connect the red lead to the VΩHz terminal and the black lead to the COM terminal. Select the Ω function.
• Continuity Test (audible beep and visual alert): Connect the red lead to the VΩHz terminal and the black lead to the COM terminal. Select the continuity function. The meter will beep and visually alert for continuity.

5.2 дополнительных функций

• LPF (фильтр нижних частот): Activates a low pass filter to remove high-frequency noise and harmonics, useful for measurements on variable frequency drives (VFDs).
• Qik-V: Allows for quick determination of AC or DC voltage without manually selecting the mode.
• Регистрация данных: The U1272A can store up to 10,000 readings. Refer to the detailed user manual for instructions on setting up logging intervals and transferring data to a PC.

6. Техническое обслуживание

6.1 Очистка

Чтобы очистить мультиметр, протрите его корпус.amp cloth and a mild detergent. Do not use abrasives or solvents. Ensure the device is powered off and leads are disconnected before cleaning.

6.2 Калибровка

The U1272A is factory calibrated. For continued accuracy, periodic calibration by a qualified service center is recommended. Refer to Keysight's official support channels for calibration services.

6.3 Хранение

При длительном неиспользовании извлекайте батарейки, чтобы предотвратить их протечку. Храните мультиметр в прохладном, сухом месте, вдали от прямых солнечных лучей и экстремальных температур.

7. Поиск Неисправностей

For issues not listed here, or if solutions do not resolve the problem, contact Keysight customer support.

8. Технические характеристики

9. Гарантия и поддержка

9.1 Информация о гарантии

KEYSIGHT products are designed for professional use and come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Keysight Technologies webСохраните чек о покупке для предъявления гарантийных претензий.

9.2 Поддержка клиентов

For technical assistance, service, or calibration inquiries, please contact Keysight Technologies customer support. Visit www.keysight.com/us/en/support.html Контактная информация и ресурсы доступны по ссылке.