OBDLink SX USB Professional Grade OBD-II Automotive Scan Tool

1. Введение и окончаниеview

The OBDLink SX USB is a professional-grade OBD-II automotive scan tool designed to transform your Windows PC, laptop, or tablet into a powerful diagnostic device. It enables users to read and clear 'Check Engine' lights, retrieve trouble codes, and monitor real-time engine data for most 1996 and newer cars and light trucks sold in the USA (excluding hybrid or electric vehicles).

This device connects to your vehicle's OBD-II port and to your computer via a standard USB-A connection, providing a reliable and fast communication link for vehicle diagnostics.

2. Что в коробке

• OBDLink SX USB Scanner
• Краткое руководство пользователя

3. Инструкции по настройке

Follow these steps to set up your OBDLink SX USB device:

1. Установить программное обеспечение: Download and install the necessary diagnostic software, such as OBDwiz, from the official OBDLink website. A license key for OBDwiz is typically included with your purchase. Ensure your Windows operating system is up to date.
2. Подключение к ПК: Plug the USB-A end of the OBDLink SX USB device into an available USB-A port on your Windows PC, laptop, or tablet. If your device only has USB-C ports, a compatible USB-C to USB-A adapter will be required.
3. Установка драйвера: The necessary drivers should install automatically upon connecting the device to your computer. If not, refer to the Quick Start Guide or the OBDLink support website for manual driver installation instructions.
4. Locate Vehicle OBD-II Port: The OBD-II port is usually located under the dashboard on the driver's side of the vehicle. Consult your vehicle's owner's manual if you cannot locate it.
5. Подключиться к автомобилю: With the vehicle's ignition off, plug the 16-pin OBD-II connector of the OBDLink SX USB into your vehicle's OBD-II port. Ensure a secure connection.

4. Инструкция по эксплуатации

Once the OBDLink SX USB is physically connected to your vehicle and computer, you can begin diagnostics:

1. Включите зажигание: Turn your vehicle's ignition to the 'ON' position (engine can be off or running, depending on the diagnostic task).
2. Запустить программное обеспечение: Open the diagnostic software (e.g., OBDwiz) on your Windows PC.
3. Установить соединение: Within the software, select the OBDLink SX USB device and establish a connection to the vehicle. The software will typically guide you through this process.
4. Perform Diagnostics:
   • Прочитайте коды неисправностей: Access the 'Trouble Codes' or 'DTCs' section to view any stored diagnostic trouble codes and their descriptions.
   • Очистить коды неисправностей: After addressing a vehicle issue, use the 'Clear Codes' function to turn off the 'Check Engine' light.
   • View Живые данные: Monitor various engine parameters in real-time, such as RPM, vehicle speed, coolant temperature, oxygen sensor readings, and fuel trim.
   • Создание отчетов: Many software applications allow you to save or print diagnostic reports for record-keeping.
5. Отключить: When finished, disconnect the software from the vehicle, turn off the vehicle's ignition, and then unplug the OBDLink SX USB device from the OBD-II port and your computer.

5. Техническое обслуживание

Proper care ensures the longevity and performance of your OBDLink SX USB:

• Уборка: Протирайте устройство мягкой сухой тканью. Избегайте использования едких химикатов и абразивных чистящих средств.
• Хранилище: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Keep the connectors free from dust and debris.
• Обновления программного обеспечения: Regularly check the official OBDLink website for firmware and software updates to ensure optimal performance and compatibility with the latest vehicle models and diagnostic protocols.
• Уход за кабелем: Avoid bending or kinking the USB cable excessively. Do not pull on the cable to disconnect the device; always grasp the connector.

6. Поиск Неисправностей

If you encounter issues with your OBDLink SX USB, consider the following:

• Устройство не распознано:
  • Ensure the USB cable is securely connected to both the device and your computer.
  • Попробуйте использовать другой порт USB на вашем компьютере.
  • Verify that the drivers are correctly installed. Check your computer's Device Manager for any unknown devices or driver errors.
  • Перезагрузите компьютер.
• Cannot Connect to Vehicle:
  • Ensure the OBD-II connector is firmly seated in the vehicle's port.
  • Убедитесь, что зажигание автомобиля находится в положении «ВКЛ».
  • Check if your vehicle is OBD-II compliant (generally 1996 and newer for US vehicles).
  • Verify that the diagnostic software is correctly configured to use the OBDLink SX USB device.
• Проблемы с программным обеспечением:
  • Ensure you are using the latest version of the diagnostic software.
  • Consult the software's help documentation or support resources.
• Прерывистое соединение:
  • Проверьте наличие повреждений кабеля USB или разъемов.
  • Убедитесь, что никакие другие устройства не создают помех для USB-соединения.

7. Технические характеристики

8. Информация о гарантии

The OBDLink SX USB comes with a Гарантия 3 год. For detailed terms and conditions, please refer to the official OBDLink warranty policy available on their webсайт или обратитесь в службу поддержки клиентов.

9 Поддержка

For technical assistance, troubleshooting, or any product-related inquiries, OBDLink offers U.S. based support. Please visit the official OBDLink webсайт для получения контактной информации и ресурсов поддержки.

10. Важные примечания

Please be aware that the OBDLink SX USB is no longer in production and has been superseded by the OBDLink EX. While the SX USB remains a functional and supported device, users seeking the latest features and compatibility may consider the newer model.