Peavey 00566190

Руководство пользователя для акустического кабеля Peavey PV длиной 25 футов (2 м), с двумя проводниками, сечением 14 AWG, NL2FX — NL2FX.

Введение

This manual provides essential information for the proper setup, operation, and maintenance of your Peavey PV 25 Ft. 2 Conductor 14 Gauge NL2FX to NL2FX Speaker Cable. This cable is designed for reliable audio signal transmission between amplifiers and passive speakers, utilizing durable NL2FX connectors for secure and efficient connections.

Продукт болееview

Peavey PV 25 Ft. 2 Conductor 14 Gauge NL2FX to NL2FX Speaker Cable

Изображение: The Peavey PV 25 Ft. 2 Conductor 14 Gauge NL2FX to NL2FX Speaker Cable, coiled, showcasing its black jacket and blue/grey NL2FX connectors on both ends.

The Peavey PV speaker cable features two 14-gauge conductors, providing robust power handling and clear audio delivery over a 25-foot length. Its NL2FX connectors are designed for quick, secure, and reliable connections to compatible speaker and ampболее жизнеспособные выходы.

Инструкции по установке

  1. Определите соединители: Убедитесь, что оба ваших amplifier/power source and speaker have compatible NL2FX (Speakon-type) input/output jacks.
  2. Подключиться к Ampпожизненнее: Insert one end of the Peavey PV speaker cable's NL2FX connector into the designated speaker output jack on your amplifier. Twist the connector clockwise until it locks securely into place.
  3. Подключиться к динамику: Insert the other end of the cable's NL2FX connector into the input jack on your passive speaker. Twist the connector clockwise until it locks securely.
  4. Проверить соединение: Gently pull on both ends of the cable to ensure they are firmly seated and locked. A loose connection can lead to signal loss or damage.
  5. Управление кабелями: Route the cable safely, avoiding tripping hazards and areas where it might be pinched or excessively bent.

Осторожность: Всегда проверяйте, что ваш amplifier is turned off and disconnected from power before making or breaking speaker connections to prevent damage to your equipment.

Руководство по эксплуатации

  • Безопасные соединения: Before powering on your audio system, double-check that all NL2FX connections are fully engaged and locked.
  • Целостность сигнала: This cable is designed for high-fidelity audio transmission. Avoid placing it near sources of electromagnetic interference (e.g., power transformers, unshielded power cables) to maintain signal purity.
  • Мощность обработки: The 14-gauge conductors are suitable for a wide range of speaker applications. Ensure the power output of your amplifier does not exceed the safe operating limits of your speakers.

Обслуживание

  • Уборка: Wipe the cable jacket with a soft, dry cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
  • Хранилище: When not in use, coil the cable neatly without sharp bends or kinks. Store it in a cool, dry place away from direct sunlight and extreme temperatures.
  • Инспекция: Periodically inspect the cable for any signs of wear, cuts, fraying, or damage to the connectors. Damaged cables should be replaced to ensure safety and optimal performance.
  • Уход за разъемом: Keep the NL2FX connectors clean and free of debris. Do not force connectors if they do not engage smoothly.

Поиск неисправностей

If you experience issues with your Peavey PV speaker cable, consider the following:

  • Нет звука:
    • Ensure both ends of the cable are securely connected and locked into the ampоратор и динамик.
    • Убедитесь, что ampLifier включен и работает правильно.
    • Check the speaker itself for any issues.
  • Прерывистый звук или потрескивание:
    • Check for loose connections at both the amplifier and speaker ends.
    • Осмотрите кабель на предмет видимых повреждений и перегибов.
    • Try a different cable to rule out the cable as the source of the problem.
  • Искаженный звук:
    • Убедитесь, что кабель не поврежден.
    • Убедитесь, что amplifier and speaker impedance match.
    • Проверьте правильность коэффициента усиления.taging and volume levels on your ampпожизненнее.

If troubleshooting steps do not resolve the issue, contact Peavey customer support or a qualified audio technician.

Технические характеристики

БрендPeavey
Номер модели00566190
Тип кабеляАкустический кабель
Длина25 футов (7.62 метров)
Калибр проводника14 калибровочных
Conductor Count2
СоединителиNL2FX to NL2FX (Speakon-type)
ЦветЧерный
Совместимые устройстваСпикеры, Amplifiers with NL2FX outputs
Использование внутри и снаружи помещенийВ помещении, на открытом воздухе
Вес товара (приблизительный)1.55 фунтов (0.7 кг)
Размеры продукта (в упаковке)11 x 2 x 9 дюйма (27.94 x 5.08 x 22.86 см)
СКП014367147353

Информация о гарантии

Peavey products are manufactured to high standards. For specific warranty terms and conditions applicable to your Peavey PV 25 Ft. 2 Conductor 14 Gauge NL2FX to NL2FX Speaker Cable, please refer to the warranty documentation provided with your purchase or visit the official Peavey webГарантийное обслуживание обычно распространяется на производственные дефекты и недостатки материалов при нормальной эксплуатации.

Поддерживать

For technical assistance, product inquiries, or further support, please contact Peavey customer service:

  • Webсайт: Посетите официальный сайт Peavey webсайт Для получения информации о ресурсах поддержки, часто задаваемых вопросах и контактных данных.
  • Продавец: Contact the retailer from whom you purchased the cable for immediate assistance or return/exchange policies.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.