1. Продукт закончилсяview
The Power Stop B445 Autospecialty Brake Shoes are designed for reliable performance in drum brake systems. These semi-metallic brake shoes are engineered for professional installation, featuring a post-cured formulation for enhanced braking power and reduced break-in time. Each shoe is precision arc ground to ensure proper fitment within the brake drum. Constructed from 100% new steel with a black coating, they offer resistance against rust. The design incorporates chamfers to promote quiet operation and prevent chatter during braking. All materials used are 100% asbestos-free.
Image: Power Stop B445 Autospecialty Brake Shoes, showing the product packaging and the brake shoes themselves. The packaging highlights features like "Precision Arc Ground" and "100% Asbestos Free".
2.Основные характеристики
- Полуметаллический состав: Engineered for durability and consistent braking performance.
- Post-Cured: Enhances initial braking power and reduces the required break-in period.
- Precision Arc Ground: Ensures accurate fitment to the brake drum for optimal contact.
- Asbestos-Free: Изготовлено без асбеста в целях безопасности.
- Новые стальные конструкции: Made from 100% new steel, black coated for rust resistance.
- Chamfered Edges: Designed to minimize braking noise and chatter.
- Размеры: Bonded; 10 inches x 2.5 inches, Heavy Duty.
.jpg)
Image: A set of four Power Stop B445 Autospecialty Brake Shoes, showcasing their arc-ground friction material and steel backing plates.
3. Совместимость и соответствие
It is crucial to verify that the Power Stop B445 Autospecialty Brake Shoes are compatible with your specific vehicle's make, model, and year before installation. Incorrect fitment can lead to improper braking function and safety hazards. Always consult your vehicle's service manual or use a reliable fitment guide to confirm compatibility.
Image: A digital interface for selecting vehicle type, year, make, and model to confirm product compatibility. This tool helps ensure the correct part is chosen for a specific vehicle.
Примечание: Some vehicle models, even within the same year range, may have variations in brake system components. For example, certain Dodge/Plymouth models may require a specific hole shape (round vs. triangular) for the anchor pin, which can affect spring and parking brake lever installation. Always compare the new brake shoes with the original components to ensure all mounting points and features match.
4. Инструкции по установке
Installation of brake shoes requires specialized tools and knowledge. It is highly recommended that installation be performed by a qualified automotive technician. Improper installation can compromise vehicle safety and braking performance.
Общие шаги (рекомендуется профессиональная установка):
- Безопасность прежде всего: Убедитесь, что автомобиль надежно поднят и установлен на домкратах. Отсоедините аккумулятор, если работаете вблизи электрических компонентов.
- Снимите колесо и барабан: Carefully remove the wheel and then the brake drum to expose the existing brake shoe assembly.
- Document Existing Setup: Take photographs or make diagrams of the existing brake shoe assembly, including spring placement and hardware, before disassembly. This will aid in correct reassembly.
- Remove Old Shoes: Using appropriate brake tools, carefully remove the retaining springs, hold-down pins, and the old brake shoes. Be cautious of brake dust, which may contain harmful particles.
- Осмотрите компоненты: Inspect the brake drum for wear, scoring, or cracks. Check wheel cylinders for leaks and the parking brake cable for proper function. Replace any worn or damaged components.
- Очистка опорной пластины: Clean the brake backing plate thoroughly, removing any rust or debris. Apply a thin layer of high-temperature brake lubricant to the contact points where the shoes slide.
- Install New Shoes: Install the new Power Stop B445 Autospecialty Brake Shoes, ensuring all springs, hold-down pins, and the parking brake lever (if applicable) are correctly reattached according to your vehicle's specifications and your documentation.
- Adjust and Bleed: Adjust the brake shoes to the drum and, if necessary, bleed the brake system according to the vehicle manufacturer's instructions.
- Собрать заново: Установите на место тормозной барабан и колесо.
- Test Braking: After installation, perform several low-speed stops in a safe area to properly seat the new brake shoes and ensure correct operation.
Image: A close-up of a mechanic's hands installing brake components on a vehicle, highlighting the precision required for brake system work.
5. Техническое обслуживание
Regular inspection and maintenance of your vehicle's brake system are essential for safety and longevity. It is recommended to have your brake shoes inspected during routine vehicle servicing, typically every 12,000 to 15,000 miles or as recommended by your vehicle manufacturer.
- Осмотрите износ: Check the friction material thickness. Replace shoes if they are worn down to the rivets or if the friction material is less than 1/16 inch (1.5 mm) thick.
- Проверьте на наличие загрязнений: Look for oil, grease, or brake fluid contamination on the shoes, which can severely reduce braking effectiveness.
- Examine Drums: Inspect brake drums for excessive wear, scoring, or out-of-round conditions. Drums may need to be machined or replaced if damaged.
- Verify Hardware: Ensure all springs, adjusters, and hold-down pins are intact and properly tensioned. Replace any corroded or stretched springs.
- Wheel Cylinder Inspection: Check wheel cylinders for leaks. Leaking cylinders should be replaced immediately.
6. Устранение распространенных неполадок
If you experience any issues with your drum brake system, consult a qualified technician. Below are some common symptoms and potential causes:
| Симптом | Возможная причина |
|---|---|
| Скрипящие или скрежещущие звуки: | Worn brake shoes, contaminated shoes, worn drums, or improper installation. |
| Снижение эффективности торможения: | Worn shoes, contaminated shoes, faulty wheel cylinders, or improper adjustment. |
| Brake Dragging: | Over-adjusted shoes, seized wheel cylinder, or faulty parking brake mechanism. |
| Вибрация при торможении: | Out-of-round brake drums or unevenly worn shoes. |
Always address brake issues promptly. Do not operate a vehicle with compromised braking capabilities.
7. Технические характеристики
- Номер модели: Б445
- Тип детали: Autospecialty Brake Shoe
- Материал: Semi-metallic, 100% new steel backing
- Asbestos Content: 100% без асбеста
- Размеры: 10 in. x 2.5 in. (Bonded, Heavy Duty)
- Позиция: Задний
- Вес товара: Примерно 6.13 фунтов
- Размеры продукта: 11.2 x 9.1 x 4.3 дюйма
- Производитель: Стоп питания
8. Что в коробке
Each package of Power Stop B445 Autospecialty Brake Shoes typically contains:
- Brake Shoe Set (quantity as required for one axle)
9. Гарантия и поддержка
For information regarding product warranty, returns, or technical support, please refer to the official Power Stop webОбратитесь на сайт или напрямую в службу поддержки клиентов. Сохраните чек о покупке в качестве подтверждения покупки для предъявления гарантийных претензий.
You can visit the official Power Stop store for more information: Power Stop Store