Руководство пользователя беспроводной точки доступа D-Link DAP-1360 стандарта N

1. Введение

The D-Link DAP-1360 Wireless N Access Point is a versatile networking device designed to extend or create a wireless network. It connects to a broadband modem, allowing you to share your internet connection wirelessly. This device is compliant with 802.11n standards, offering faster speeds and greater range compared to 802.11g, while maintaining backward compatibility with 802.11g and 802.11b devices. The DAP-1360 can be configured to operate in seven distinct modes to suit various networking requirements.

Рисунок 1: Передняя часть view of the D-Link DAP-1360 Wireless N Access Point. The device is black with two external antennas and indicator lights on the front panel.

2. Содержимое упаковки

Убедитесь, что ваш пакет содержит следующие предметы:

• D-Link DAP-1360 Wireless N Access Point
• Адаптер питания
• Ethernet-кабель
• Краткое руководство по установке (если прилагается)

Если какие-либо элементы отсутствуют или повреждены, обратитесь к местному дилеру D-Link.

3. Настройка

3.1 Физическая установка

1. Позиционирование: Place the DAP-1360 in a central location within your desired wireless coverage area, away from obstructions and sources of interference (e.g., microwave ovens, cordless phones).
2. Подключите питание: Plug the power adapter into the DAP-1360's power port and then into a wall outlet. The power LED on the device should illuminate.
3. Подключиться к сети: Connect one end of an Ethernet cable to the LAN port on the DAP-1360 and the other end to your broadband modem or existing network switch/router.

Рисунок 2: Сзади view of the D-Link DAP-1360, highlighting the Ethernet port and power input for physical connections.

3.2 Начальная конфигурация

After physical installation, you will need to configure the DAP-1360 using a web browser. The exact steps may vary slightly depending on your chosen operating mode.

1. Подключите компьютер: Temporarily connect a computer directly to the DAP-1360's LAN port using an Ethernet cable, or connect wirelessly to its default Wi-Fi network (SSID and password usually found on a label on the device).
2. Доступ Web Интерфейс: Откройте web browser and enter the default IP address of the DAP-1360 (e.g., http://192.168.0.50 or http://dlinkap). Refer to the Quick Installation Guide for the precise default IP and login credentials.
3. Авторизоваться: Enter the default username and password (e.g., username: админ, пароль: [leave blank] or админ).
4. Запустите мастер установки: Follow the on-screen setup wizard to select your desired operating mode and configure network settings, including Wi-Fi name (SSID) and password.
5. Сохранить настройки: Apply and save your configuration changes. The device may restart.

4. Режимы работы

The DAP-1360 offers seven distinct operating modes, allowing it to adapt to various network environments and requirements.

• Режим точки доступа (AP): This is the default mode. The device acts as a central hub, allowing wireless clients to connect to a wired network. It converts a wired connection into a wireless one.
• Режим беспроводного клиента: In this mode, the DAP-1360 connects to another access point wirelessly, acting as a wireless adapter for a wired device (e.g., a desktop PC or gaming console without Wi-Fi).
• Мостовой режим: This mode allows two wired networks (LANs) to be joined wirelessly. It creates a wireless link between two segments of a wired network.
• Bridge with AP Mode: Combines the functionality of Bridge mode with Access Point mode. The device acts as a wireless hub for local clients while simultaneously bridging two wired networks.
• Режим повторителя: Extends the coverage of an existing wireless network. The DAP-1360 receives a wireless signal and re-transmits it, eliminating "dead spots" and increasing the range of your Wi-Fi.
• Режим клиентского маршрутизатора WISP: Designed for Wireless Internet Service Provider (WISP) subscribers. It allows the DAP-1360 to connect wirelessly to a WISP network and share that internet connection with multiple wired computers in a home or office without needing an additional router.
• WISP Repeater Mode: Similar to WISP Client Router mode, but also extends the WISP connection wirelessly to other wireless devices within the local network, acting as both a client and a repeater for the WISP service.

5. Техническое обслуживание

Regular maintenance ensures optimal performance and longevity of your DAP-1360.

• Обновления прошивки: Периодически проверяйте поддержку D-Link. webСайт обновлений прошивки. Обновление прошивки может повысить производительность, добавить новые функции и устранить уязвимости безопасности.
• Уборка: Содержите устройство в чистоте и не допускайте попадания пыли. Для протирки корпуса используйте мягкую сухую ткань. Не используйте жидкие чистящие средства или аэрозоли.
• Вентиляция: Ensure the device has adequate ventilation. Do not cover ventilation openings or place the device in an enclosed space that restricts airflow.
• Перезагрузка: If the device experiences intermittent issues, a simple restart (unplugging the power for 10 seconds and plugging it back in) can often resolve them.

6. Поиск Неисправностей

В этом разделе рассматриваются распространенные проблемы, с которыми вы можете столкнуться при использовании вашего DAP-1360.

6.1 Нет питания / Устройство не включается

• Ensure the power adapter is securely connected to both the DAP-1360 and a working electrical outlet.
• Проверьте работоспособность розетки, подключив к ней другое устройство.
• Check if the power adapter is the correct one supplied with the device.

6.2 Невозможно получить доступ к Web-Based Configuration Utility

• Ensure your computer is directly connected to the DAP-1360 via Ethernet or wirelessly to its default SSID.
• Verify your computer's IP settings are set to "Obtain an IP address automatically" (DHCP).
• Confirm you are using the correct default IP address (e.g., http://192.168.0.50) или имя хоста (http://dlinkap).
• Попробуйте очистить кэш браузера или использовать другой браузер. web браузер.
• If you have changed the device's IP address and forgotten it, you may need to perform a factory reset.

6.3 No Internet Connection / Slow Speeds

• Check the physical Ethernet cable connection between the DAP-1360 and your modem/router.
• Убедитесь, что ваш модем/маршрутизатор работает правильно и имеет активное подключение к Интернету.
• Ensure the DAP-1360 is configured in the correct operating mode for your network setup.
• Restart both your modem/router and the DAP-1360.
• Проверьте наличие беспроводных помех от других устройств.
• Confirm that your wireless security settings (WPA2, WPA) are correctly configured.

6.4 Wireless Network Not Visible

• Ensure the DAP-1360 is powered on and the wireless LED indicator is active.
• Check if the SSID Broadcast feature is enabled in the device's web конфигурация.
• Verify that the wireless channel is not conflicting with other networks in your area. Try changing the channel in the settings.
• If the issue persists, try restarting the DAP-1360.

7. Технические характеристики

8. Гарантия и поддержка

For warranty information, please refer to the documentation included with your product or visit the official D-Link website for your region. D-Link provides technical support and resources to assist with product setup and troubleshooting.

For any queries or technical assistance, you may contact D-Link support channels. For specific inquiries related to purchase or local support, you may also contact your reseller. For example, Bizgram Asia Pte Ltd can be reached at +65-87776958 for support in their region.