CO3030 Vectissimo II Convection Heater
Instruction Manual
www.rowenta.com
A. Power indicator
B. Power selection switch
C. Thermostat button
D. Convector stand
E. Marker
SELECTING THE FUNCTION:
Using the button (B), select the required function by turning the button marker to face the symbol: O : stop
•: 1,200W
••: 2,400W (CO3030) – 2,400W Blower (CO3035)
LIGHT:
Light on (A), it becomes operational as soon as your appliance has been plugged in.
THERMOSTAT:
Temperature settings can be adjusted according to personal preference by turning button (C), after having selected the required function with a button (B):
- MAX position (pointing to the button index): warmer,
- MIN position (pointing to the button index): cooler,
- Frost-guard position (pointing to the button index) :*: this setting allows you to automatically maintain the temperature above 0°C in a room that is normally isolated, and the size of the room corresponds to the power output of your appliance.
CLEANING & STORAGE
- Your appliance must be unplugged before proceeding with any cleaning work.
- You can clean it with a slightly damp cloth.
- IMPORTANT: Never use abrasive products which might damage the appearance of your appliance.
- We recommend that you clean the air inlet and outlet grills at least once a year; (clean with a vacuum cleaner if necessary).
- It is important to allow the appliance to cool before winding the lead.
- When you are not using your appliance, store it in a dry place.
Documents / Resources
 | Rowenta CO3030 Vectissimo II Convection Heater [pdf] Instructions CO3030, Vectissimo II Convection Heater |
