B200W0 Meat Thermometer
“
Specifications
- Product Name: Meat Thermometer B200W0
- Contact: Thermometer@seller-us.com
Product Information
The Meat Thermometer B200W0 is a high-quality electronic
thermometer designed for precise temperature monitoring of meat and
ambient temperatures during cooking. It features Bluetooth
connectivity for seamless pairing with the probe and a
user-friendly interface for easy operation.
Usage Instructions
1. Power On/Off
To power on the device, press and hold the power button for 3
seconds. The display will light up, and the device will enter
working status. To power off, press the power button briefly or
hold it for 3 seconds.
2. Backlight and Display
The backlight button controls the display backlight. Press
briefly to turn on the backlight. The display will turn off
automatically after 15 seconds to save power.
3. Probe Pairing
The probe is pre-paired with the device via Bluetooth at the
manufacturing facility. In most cases, you will not need to pair
them manually. If required, follow the instructions in the manual
for pairing.
4. Temperature Modes
Toggle between meat and ambient temperature modes by pressing
the designated button on the device. The display will show the
selected temperature mode.
FAQ
Q: Can I clean the probe under cold water?
A: It is not recommended to run the probe under cold water
immediately after use as it may damage the device. Refer to the
cleaning instructions in the manual for proper care.
Q: Is it safe to use the probe near hot surfaces?
A: Avoid using the probe near hot surfaces or in a microwave or
pressure cooker to prevent damage to the device and ensure accurate
temperature readings.
Q: What cleaning products should I avoid using with the
thermometer?
A: Do not use cleaning products containing alcohol, ammonia,
benzene, or abrasives as they could damage the device. Refer to the
cleaning section in the manual for suitable cleaning methods.
“`
MEAT THERMOMETER B200W0
User Manual
Mail: Thermometer@seller-us.com
CATALOG
1. IMPORTANT SAFEGUARDS……………………………1 2. DIAGRAM………………………………………………………..2
2.1 Button functions…………………………………….3 3. ELECTRONIC DISPLAY………………………………….4-5
3.1 Screen Display Content………………………..4-5 4. SPECIFICATION……………………………………………..6 5. USING FOR THE FIRST TIME………………………..7 6. CLEANING……………………………………………………..8 7. FAQ………………………………………………………………….9-10 8. WARNINGS…………………………………………………….11-12
8.1 FCC Warnings………………………………………..12 8.2 Warranty………………………………………………..12 9. APP COOKING INSTRUCTIONS…………………….13
1. IMPORTANT SAFEGUARDS
CAUTION: Please read this entire manual before using your meat thermome B200W0.Failure to follow these instructions could result in property damage or bodily injury. 1. DO NOT use the Probe when cooking at ambient
temperatures above 512F/300¥ for more than 2 minutes. 2. DO NOT place the Device Base unit directly on the grill
cover or close to any hot surface. 3. DO NOT use the Probe in a microwave or pressure cooker. 4. DO NOT use cleaning products containing alcohol, ammonia,
benzene, or abrasives, as could damage the device. 5. DO NOT run the Probe under cold water immediately after
cooking. Let the probe cool down prior to washing. 6. The Probe is IP67 waterproof, and it can be washed by hand or in a dishwasher. But the Device Base is NOT waterproof and should not be submerged in water or placed in the dishwasher. 7. The probe isSHARP! Care should be exercised when handling the probe.This appliance should NOT be used by or near children or individuals with certain disabilities. 8. If the Probe falls into a fire or direct heat source, turn off the cooking appliance and close the lid immediately. Allow the Probe to cool completely before removing it. 9. Carefully remove the Probe from the cooked meat, taking caution as it may be hot. 10.The Device Base shall only be supplied with safety extra-low voltage corresponding to the marking on the appliance.
SAVE THESE INSTRUCTIONS
-1-
2. DIAGRAM
5
6
8 12
1
10
11
2
7
3 9
4
1 LCD Screen Backlight Button (See button functions for
2 operating instructions.)
3 M Button(See button functions for operating instructions.) 4 Type-C Charging Port 5 Probe 1 6 Probe 2 7 Device Base 8 Ambient Temperature Sensor (Ambient Max 512°F/300¥) 9 Internal Temperature Sensor(Internal Max 212F/100¥) 10 Safety Line 11 Stainless Steel 12 High-density Ceramic Handle
-2-
2.1 Button functions
Button
Device Base Status
Operating
Power on
Press and hold for 3s
Backlight Button
Press briefly 1s
Press and hold for 3s
Press and hold for 5s
M Button Power off
Press briefly 1s
Press and hold for 3s
Buzzer
Response Function
The display lights up
Beeps twice
fully, and the relay socket enters working
status
Turn on the display, and Beeps once the backlight turns off
after 15s
Beeps twice Power off
Beeps once
Enter probe pairing mode
Each press cycles Beeps once between meat/ambient
temperature modes
Beeps twice
Temperature unit (/) toggle (cycle)
Press and hold for 10s
Beeps five Temperature unit (/)
times
toggle (cycle)
Backlight Button+M
Press both buttons simultaneously for 3s
Beeps three times
Temperature unit (/) toggle (cycle)
Button
Network configuration status
Press both buttons simultaneously for 3s
Beeps three times
Exit network configuration mode
*Please note that the device base and the probe are pre-paired via Bluetooth at our manufacturing facility. Generally, you will not need to pair them.
-3-
3. ELECTRONIC DISPLAY
1 4 7
2 8 3
5 6
3.1 Screen Display Content
S/N Icon Name
Display
Response Function
Steady On
Alarm
Off
Device Base Bluetooth Off
Steady On
Device Base Relay Hub-Mobile Bluetooth Pairing
Steady On
Device Base-Mobile Bluetooth Connected
1
Off
Device Base WiFi Off
Steady On
Device Base Relay Hub-Mobile Bluetooth Pairing/Network Disconnected/No Internet Access Device Base WiFi Connected
Graphical representation recommended
Steady On
Device Base Battery
Battery level indicator blinking
Device Base Charging
Steady On
Device Base Low Battery
-4-
S/N Icon Name
Display
Steady On 2
Response Function Probe charging completed (NoteThe probe has completed charging. The device base will automatically enter sleep mode after 10 minutes of inactivity) Probe in normal operation
Steady On
The probe is pairing
Off
The probe is charging
Steady On
Probe disconnected
3
Off
Probe connected
Steady On
Displaying probe’s real-time battery level
4
Battery level indicator blinking
Probe charging
Steady On
Low battery on probe
5
Steady On
Meat Temperature
6
Steady On
Ambient Temperature
Temperature unit
7
Temperature unit
8
Numeric display Display the actual measured temperature
value
-5-
4. SPECIFICATION
Connection
Bluetooth 5.0 & WiFi (2.4GHz)
Probe-Device Base
30M Stable Connection
Connection Range
Device Base-Phone40M Stable Connection WiFi (Device Base to Phone) Unlimited Range
WiFi (Device Base-Router) 60M Stable Connection
Waterproof Grade of Probe IP67
Temp Measurement Range 32 to 212 ( 0 to 100 )
Charging Time of Probe
Under 40min
Endurance Time of Probe
Room Temperature15H+ 240¥:10H+
Charging Time of Repeater Under 4H
Endurance Time of Repeater 40H+
Battery of Repeater
2000 mAH
Charging Method
USB-Type C / 5V @ 1A
*Tested under ideal conditions at 77°F/25°C ambient temperature with direct line of sight and no obstructions or electromagnetic interference. Actual transmission range may vary depending on environmental obstacles and EMI levels
-6-
5. USING FOR THE FIRST TIME
1Before using your MEAT THERMOMETER B200W0,ensure the
product is fully charged and you have reviewed the important
safety information. 2Download the free App for iOS or Android.
1
2
3
Download APP
Supported systerm IOS & Android
3Enable Bluetooth, Mobile Data, and Wi-Fi in your phone settings. Skip this step if already enabled
4Add the device to the app Launch the app, then press and hold the Backlight + M buttons for 3s After three beeps, the device enters pairing mode Follow the in-app instructions to complete setup
5Start cooking Insert the probe fully into the meat (past the safety line) Set your desired meat type/doneness or target temperature in the app The app and device will alert you when the target temperature is reache
-7-
6. CLEANING
Ensure the charging contacts are clean before returning the probe to its base.
Charging Contacts
-8-
7. FAQ
Q: What’s the difference between a wireless food thermometer and a traditional one?
A:
Wireless Monitoring: Connects via Bluetooth/WiFi to a smartphone app for real-time temperature tracking without opening oven lids. Remote Alerts: Receives push notifications when target temperatures are reached. Multi-Probe Support: Monitors multiple food items simultaneously. Data Logging: Stores historical temperature curves for cooking analysis.
Q: Why use a food thermometer?
A:
Food Safety: Ensures food reaches safe internal temperatures to kill harmful bacteria and reduce foodborne illnesses. Precision Cooking: Avoids overcooking, preserving texture and moisture.
Q: What if the connection is unstable or disconnects?
A: Common Causes:
Out of range (walls, metal barriers, or closed doors weaken signals). Phone’s Bluetooth/WiFi/data is off, or the app is closed in the background. Low battery in the device or probe.
Solutions: Reduce distance between devices and remove obstacles. Enable Bluetooth, WiFi, and mobile data; keep the app running. Restart the device, app, or re-pair the thermometer. Recharge the device.
-9-
Q: What’s the difference between WiFi remote control and Bluetooth local control?
A: For stability, WiFi is prioritized
The device connects to a router via WiFi. Data is relayed through the router via wired networks to a cloud server, then transmitted to your phone via mobile networks. While latency is higher than Bluetooth’s local control, it enables stable remote monitoring. Privacy Note: User data is stored only on your phone–servers act as a relay and do not retain any information.
Bluetooth Local Control (Backup Mode): This serves as a fallback option–only activated when WiFi connection fails. The probe directly links to your phone via Bluetooth.
Key Limitations: Shorter Range vs. WiFi: Alerts may fail if you move too far, as real-time probe data won’t reach your phone.
No Remote Monitoring: Temperature thresholds can’t be checked without active data transmission.
Design Purpose: Ensures basic functionality during WiFi outages, but WiFi remains recommended for reliable alerts.
Q: What if pairing fails or the app crashes?
A: Troubleshooting Steps:
Restart the app and thermometer. Update the app to the latest version. Check the manual or contact support for firmware updates.
Q: How to clean and maintain?
A: Wipe with hot, soapy water (do not immerse the base unit).
Probe: Waterproof.
-10-
8. WARNINGS
1. Wireless Meat Thermometer is designed for use in meat(food).
2. The charger dock is non-waterproof, do not immerse it in water or other liquids.
3. To avoid damage the probe, insertion of the probe in the meat pass the Safety Notch in necessary.
4. Wireless Meat Thermometer probes are not diswasher safe. Please hand wash with soap and water before and after each use.
5. Wireless Meat Thermometer is water resistant, not fully waterproof, do not submerge in water for long periods of time.
6. Please take caution with pointed tip of the probe. 7. The probe will be very hot during or just after a cooking.
Do not touch with bare hands. 8. Do not submerge the probe in cold water after cooking. Wait until it has cooled down prior to washing. 9. The maximum temperature of the probe is 212(100). The internal temperature above 212(100) may potentially damage the probe. 10. The max temperature resistance of internal sensor is185°F (85) . To prolong the service life of the probe, it’s better to keep the internal temper-ature below 185(85). 11. When cooking, ensure any part of the probe is not touching any HOT cooking surface. 12. Wireless Meat Thermometer product is not a toy, please keep it away from children. 13. When not in use, put the probe back into the dock, and store the product in a dry and cool place.
-11-
8.1 FCC Warnings
1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radi or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement,Thisequipment should be installed and operated with a minimum distance of 20 cm between he radiator and your body.
8.2 Warranty
If there is a functional failure within 12 months from the day after you sign for it, it will be tested and confirmed by after-sales service center, and you can enjoy the free maintenance services.
Non-Warranty
1. Unauthorized repair, misuse, collision, abuse, accident, alteration, improper use of accessories other than this product. 2. The validity period of three packs has exceeded. 3. Damage caused by force majeure. 4. This product and its accessories have functional failures due to human reasons.
-12-
9. APP COOKING INSTRUCTIONS
1. Enter the device status list and click the to start cooking
2. Set the type of meat you want 3. Select the meat temperature or the degree of doneness
of the meat you want 4. You can view the cooking temperature of the food in real
time.
Ambient temperature
*As the app is constantly updated, some features may vary. For any inquiries, please reach out to our customer support.
-13-
Documents / Resources
 | ROUUQ B200W0 Meat Thermometer [pdf] User Manual B200W0, B200W0 Meat Thermometer, Meat Thermometer, Thermometer |