ROSA COSMO Led 48 Owner’s Manual
TECHNICAL DATA
| Application | urban roads, residential roads (internal), pedestrians, parkings |
| Assembly | on extension arms with ⌀ 60 x 100 mm ending |
| Colour | inox / black |
| Ingress protection | IP 66 for the optical part and the driver |
| Optical system | PMMA optics, interchangeable LED module |
| Material | anodised aluminium alloy |
| Expected useful lifetime | L90B10 – 100 000 h |
| CRI | >70 |
| Inrush current | 43A / 260µs |
| Input voltage frequency | 50/60Hz |
| Power factor | ≥0.95 |
| Number of LED | 24 |
| Control system | Luminaire has the possibility to connect to an external control system via DALI interface (optionally via analog signal 1- 10V). |
| Code | Symbol | LED power | Luminaire power consumption | LED forward current | Colour temperature (CCT) | LEDs luminous flux¹ | Luminaire luminous ux¹ | Luminous ecacy¹ | Unit volume | Net weight |
| 2210033/6/…² | COSMO LED 48 | 48 W | 55 W | 700 mA | 5000 K | 8650 lm | 7800 lm | 141 lm/W | 0.073 m³ | 10.2 kg |
- tolerance +/- 5% due to LEDs accuracy
- symbol of chosen optical system eg. 2210035/6/T2 is COSMO LED 72 5000K with T2 optical system
DIRECTIVES AND STANDARDS
DIRECTIVES: 2014/35/UE (Official Journal of the UE L 96/357 29.03.2014), 2014/30/UE (Official Journal of the UE L 96/79 29.03.2014), 2011/65/UE, 2009/125/EC STANDARDS:
CHARGING DISCHARGE FROM THE LED LUMINAIRE HOUSING
In order to efficient discharge the electrostatic charge from the housing of LED fitting installed on the pole from dielectric material (non-conductive) one of the following solutions is required:
- functional grounding
- LED luminaire with an additional protection
TECHNICAL DRAWING
PHOTOMETRIC CURVES
COSMO LED 48
POWER SYSTEM FUNCTIONS
Luminaire in standard has following functions of intelligent power supply:
- Connection to outside control system by DALI interface (operation of analog signal 1-10V as an option),
- Possibility of programming multistage dimming of luminaire, up to 5 intervals in the range of from 10 to 100% of nominal power,
- Temperature protection of LED module (from overheating) in case of unintentional luminaire operation during the,
- Regulation of power / luminous flux – the option of setting another value than the catalogue in the range of 30-100% of nominal one,
ACCETABLE QUANTITY OF LUMINAIRES ON ONE CIRCUIT
Overcurrent switches MCB type B or C
| Luminaire | Typ | 2A | 4A | 6A | 10A | 16A | 20A | 25A |
| COSMO LED 48, 60, 72W | B | 1 | 2 | 4 | 6 | 10 | 12 | 15 |
| C | 1 | 4 | 6 | 10 | 17 | 20 | 25 |
Fuse – type gG and GL
| Luminaire | 2A | 4A | 6A | 10A | 16A | 20A | 25A |
| COSMO LED 48, 60, 72W | 0 | 4 | 8 | 11 | 22 | 31 | 44 |
Zakład Produkcji Sprzętu Oświetleniowego „ROSA” Sp. z o.o. 43-109 Tychy, ul. Strefowa 1 tel. +48 32 73 88 901
www.rosa.pl
Documents / Resources
 | ROSA COSMO Led 48 [pdf] Owner's Manual COSMO Led 48, COSMO, COSMO Led, Led 48, Led |
