2024+ RZR TUNING GUIDE
RZR24XP-STG6
RADIO DEFAULTS
These are recommended settings for optimum performance with a PMX-3 source unit:
PUNCH EQ CROSSOVER
INTERNAL AMP REAR RCA
Before installing amplifier, remove cover and set PRESET to OFF position. Verify remaining settings are properly configured. Replace cover for water-tight protection. Adjusting settings beyond those listed below will void your warranty.
INPUT SWITCH
REMOVE 2 SCREWS USING SUPPLIED 3mm ALLEN
INPUT SWITCH: 2-CHANNEL INPUT (default)
GAIN/EQ/CROSSOVER
- FRONT: 02:00 O’Clock
- REAR: 01:00 O’Clock
- SUB: 01:30 O’Clock
- PRESET: OFF
- PUNCH EQ: MIN
- CROSSOVER: HP (High-Pass)
- SUB INPUT: ON
- CROSSOVER: 80Hz
2024+ RZR TUNING GUIDE
RZR24RCXP-STG6
RADIO DEFAULTS
These are recommended settings for optimum performance with a RIDE COMMAND source unit:
FADE/BALANCE EQUALIZER A.V.C.
Before installing amplifier, remove cover and set PRESET to OFF position. Verify remaining settings are properly configured. Replace cover for water-tight protection. Adjusting settings beyond those listed below will void your warranty.
INPUT SWITCH
REMOVE 2 SCREWS USING SUPPLIED 3mm ALLEN
INPUT SWITCH: 2-CHANNEL INPUT (default)
GAIN/EQ/CROSSOVER
- FRONT: 02:00 O’Clock
- REAR: 01:00 O’Clock
- SUB: 01:30 O’Clock
- PRESET: OFF
- PUNCH EQ: MIN
- CROSSOVER: HP (High-Pass)
- SUB INPUT: ON
- CROSSOVER: 80Hz
07-14-2025
1220-81779-01
Documents / Resources
![]() | Rockford Fosgate 2024 RZR Tuning [pdf] User Guide RZR24XP-STG6, RZR24RCXP-STG6, 2024 RZR Tuning, 2024, RZR Tuning, Tuning |