ZORNHER ZH870 Wireless Gaming Mechanical Keyboard User Manual

Introducere

This manual provides detailed instructions for the ZORNHER ZH870 Wireless Gaming Mechanical Keyboard. Please read this guide thoroughly to ensure proper setup, operation, and maintenance of your device. The ZH870 features an 80% layout, IMD PC keycaps, creamy linear switches, hot-swappable design, RGB backlighting, and triple connectivity options.

Image: ZORNHER ZH870 Wireless Gaming Mechanical Keyboard with its distinctive spider web pattern and purple RGB backlighting.

Conținutul pachetului

Verify that all items are present in your ZORNHER ZH870 package:

• 1 x Fully Assembled Mechanical Keyboard Body
• 3 x Comutatoare de schimb
• 1 x Extractor pentru tastatură
• 1 x 2.4GHz Receiver (USB Dongle)
• 1 x USB-C Cable (1.8m nylon)
• 1 x capac de praf
• 1 x manual de instrucțiuni

Image: A visual representation of the ZORNHER ZH870 package contents, including the keyboard, USB-C cable, 2.4GHz receiver, replacement switches, keycap puller, and instruction manual.

Înființat

Încărcare inițială

Before first use, it is recommended to fully charge the keyboard. Connect the provided USB-C cable to the keyboard's USB-C port and the other end to a powered USB port (e.g., computer, wall adapter). The keyboard features a 4000mAh battery.

Opțiuni de conectivitate

The ZORNHER ZH870 supports three connection modes: 2.4GHz wireless, Bluetooth 5.0, and USB-C wired. You can connect up to 5 devices simultaneously.

Image: An illustration detailing the keyboard's triple connection capabilities, including 2.4GHz wireless, Bluetooth 5.0, and USB-C wired, along with examples of compatible devices such as Switch, Xbox, PlayStation, PC, Laptop, Tablet, and Phone.

Conexiune wireless de 2.4 GHz

1. Locate the 2.4GHz USB receiver in the package.
2. Conectați receptorul la un port USB disponibil de pe computer.
3. On the keyboard, switch the mode selector to 2.4GHz. The keyboard should automatically connect.

Conexiune Bluetooth 5.0

1. On the keyboard, switch the mode selector to Bluetooth.
2. Press and hold the Fn key + a designated Bluetooth channel key (e.g., Fn + 1, Fn + 2, Fn + 3) for 3-5 seconds until the indicator light flashes, indicating pairing mode.
3. On your device (PC, Mac, tablet, phone), go to Bluetooth settings and select "ZORNHER ZH870" to pair.
4. După asociere, indicatorul luminos va deveni continuu.

Conexiune prin cablu USB-C

1. Conectați cablul USB-C furnizat la portul USB-C al tastaturii.
2. Conectați celălalt capăt al cablului USB-C la un port USB disponibil de pe computer.
3. Tastatura va trece automat în modul cu fir și va începe încărcarea.

Instrucțiuni de operare

Comutarea între moduri

Use the physical switch located on the keyboard to select between 2.4GHz, Bluetooth, and Wired (USB-C) modes.

Controale de iluminare RGB

The ZH870 features 22 preset RGB lighting effects, including side-glow and south-facing LEDs. Use the following key combinations to control the lighting:

• Fn + Shift: Schimbați culoarea luminii de fundal
• Fn + Code: Change Backlight Effect (Cycle through 22 modes)
• Fn + Backspace: Porniți/Opriți luminile
• Fn + ↑: Creșteți luminozitatea
• Fn + ↓: Reduceți luminozitatea
• Fn + ←: Speed Up Light Change Rate
• Fn + →: Speed Down Light Change Rate

Image: A visual guide illustrating the function key combinations for adjusting RGB backlight color, effects, brightness, and speed on the ZORNHER ZH870 keyboard.

Personalizare și software

The ZORNHER ZH870 is fully customizable with driver support. You can remap keys, set macros, and personalize lighting modes to fit your gaming or workflow style. Refer to the official ZORNHER website for driver downloads and detailed software instructions.

Image: A screenshot of the ZORNHER software interface, demonstrating options for RGB lighting effects, macro recording, and profile customization for the ZH870 keyboard.

Întreţinere

Curatenie

To clean your keyboard, disconnect it from power. Use a soft, dry cloth to wipe the keycaps and chassis. For deeper cleaning, use the provided keycap puller to remove keycaps and a soft brush or compressed air to remove dust and debris from beneath them.

Switch Replacement (Hot-Swappable)

The ZH870 features a hot-swappable PCB, compatible with both 3-pin and 5-pin mechanical switches. No soldering is required for switch replacement.

1. Using a switch puller (not included, but often comes with replacement switches), carefully grip the switch and pull it straight up to remove it.
2. Aliniați pinii noului comutator cu găurile de pe PCB.
3. Apăsați ușor noul comutator în poziție până când se aude un clic. Asigurați-vă că pinii nu sunt îndoiți.
4. Test the new switch to confirm functionality.

Imagine: O imagine detaliată view of the ZORNHER ZH870's hot-swappable PCB, showing the switch sockets and a switch puller tool, highlighting compatibility with 3-pin and 5-pin switches.

Depanare

• Tastatura nu răspunde: Ensure the keyboard is charged. Check the connection mode (2.4GHz, Bluetooth, or USB-C) and ensure it matches your device's connection. For wireless modes, verify the receiver is properly plugged in or Bluetooth is paired. Try restarting the keyboard or your device.
• Luminile RGB nu funcționează: Ensure the lights are not turned off (Fn + Backspace). Check brightness levels (Fn + ↑/↓). If using software, verify settings.
• Probleme de conectivitate: For 2.4GHz, try a different USB port for the receiver. For Bluetooth, unpair and re-pair the device. Ensure no other wireless devices are causing interference. For wired, try a different USB-C cable or port.
• Cheile nu se înregistrează: If a specific key is not working, it might be a faulty switch. Utilize the hot-swappable feature to replace the switch with one of the provided spares.
• Bateria se descarcă rapid: Reduce RGB brightness or turn off lighting when not needed. Ensure the keyboard is fully charged. If the issue persists, contact support.

Specificații

Garanție și suport

The ZORNHER ZH870 Wireless Gaming Mechanical Keyboard comes with a 2 an garanție from the date of purchase, covering manufacturing defects. For warranty claims, technical assistance, or any product-related inquiries, please contact ZORNHER customer support through the official website-ul sau canalele de asistență ale comerciantului dvs.

Vă rugăm să păstrați dovada achiziției pentru validarea garanției.