VIVO DESK-KIT-2W8B

Manual de instrucțiuni pentru biroul electric cu motor dublu VIVO DESK-KIT-2W8B, tip sit-stand

Model: DESK-KIT-2W8B

1. Introducere

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your VIVO DESK-KIT-2W8B Electric Dual Motor Sit-Stand Desk. This workstation is designed to facilitate a dynamic work environment, allowing seamless transitions between sitting and standing positions with its electric height adjustment system. It features a spacious 83 x 30 inch black tabletop and a robust white frame, equipped with a memory controller for personalized height settings.

Please read this manual thoroughly before assembly and use to ensure safe and correct operation.

2. Informații importante privind siguranța

AVERTIZARE:

  • Always ensure the desk is properly assembled and anchored.
  • Nu depășiți greutatea maximă recomandată de 100 kg.
  • Keep hands and fingers away from moving parts when adjusting the desk height.
  • Always use the push-button controller to adjust the desk height. Never attempt to manually force the desk to move.
  • Ensure all cables are managed to prevent entanglement during height adjustments.
  • Acest produs este destinat numai utilizării în interior.

3. Conținutul pachetului

Verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact VIVO customer support.

  • Desk Frame (Dual Motor Legs, Crossbars, Feet)
  • 83 x 30 inch Black Tabletop (3-piece)
  • Controler de memorie
  • Adaptor de alimentare și cabluri
  • Elemente de asamblare (șuruburi, bolțuri etc.)
  • Manual de asamblare (acest document)

Note: The desk ships in two separate boxes, which may arrive 1 to 2 days apart.

Diagram showing desk dimensions and two shipping boxes for table top and desk frame.
Figure 3.1: Desk dimensions and packaging information. The desk is shipped in two boxes: one for the tabletop and one for the desk frame.

4. Instrucțiuni de instalare și asamblare

Assembly of the VIVO DESK-KIT-2W8B desk requires careful attention to detail. It is recommended that two people assemble this desk to ensure safety and ease of installation. A screwdriver is recommended for assembly; other tools may be required but are not included.

4.1 Înainte de a începe

  • Eliberați o zonă spațioasă pentru adunare.
  • Despachetați toate componentele și verificați-le în funcție de lista conținutului ambalajului.
  • Read through all assembly steps before starting.

4.2 Pași de asamblare (Generalități)view)

  1. Asamblați cadrul biroului: Attach the feet to the dual motor legs. Connect the legs using the crossbars. Ensure all connections are secure.
  2. Pregătiți blatul mesei: The 83x30 inch tabletop consists of three pieces. Align and join these pieces using the provided dowels and steel braces. Ensure a flat and seamless surface.
  3. Atașați blatul mesei la cadru: Carefully place the assembled tabletop onto the desk frame. Align the pre-drilled holes on the tabletop with the frame. Secure the tabletop to the frame using the provided screws.
  4. Instalați panoul de control: Mount the memory controller to the underside of the desk in a convenient location. Connect the control panel and power adapter to the desk frame's motor system.
  5. Organizare de cabluri: Route all cables neatly to prevent interference with the desk's movement.
Assembled VIVO electric sit-stand desk with dual monitors, keyboard, mouse, and other office accessories.
Figure 4.1: An assembled VIVO electric sit-stand desk in a home office setting, showcasing its spacious black top and white frame.
Diagram showing three tabletop panels being joined together with arrows indicating assembly direction.
Figure 4.2: Illustration of the 3-panel tabletop assembly, showing how the sections connect to form a single surface.
Close-up of the desk frame showing dual motors and 220 lbs weight capacity.
Figure 4.3: The robust desk frame with dual motors, highlighting its 220 lbs weight capacity for stable support.

5. Instrucțiuni de utilizare

Your VIVO Electric Sit-Stand Desk is equipped with a user-friendly control panel for effortless height adjustments and memory presets.

5.1 Reglarea înălțimii biroului

  • Butoane Sus / Jos: Utilizați ^ (sus si v (down) buttons on the control panel to raise or lower the desk to your desired height. The desk operates smoothly and quietly.
  • The desk offers a height range of 24.5 inches to 50.3 inches.

5.2 Using Memory Presets

The control panel features 3 memory presets to save your preferred sitting and standing heights.

  1. Setați o poziție de memorie: Adjust the desk to your desired height using the up/down buttons. Press the S (Set) button, then immediately press one of the number buttons (1, 2, sau 3) pentru a salva înălțimea curentă la presetarea respectivă.
  2. Reapelarea unei poziții de memorie: Press the corresponding number button (1, 2, sau 3) to automatically move the desk to the saved height.
Close-up of the smart control panel with buttons for up, down, set, and three memory presets (1, 2, 3).
Figure 5.1: The smart control panel, showing buttons for height adjustment and programmable memory settings.
Two VIVO desks, one in a low sitting position and one in a high standing position, illustrating the height range.
Figure 5.2: Visual representation of the desk's height range, from sitting to standing positions.

5.3 Collision Detection

The desk is equipped with collision detection, which can be adjusted via the controller. This feature helps prevent damage by stopping movement if an obstruction is detected.

Diagram highlighting the advanced desk frame design with collision detection and powerful dual motors.
Figure 5.3: Advanced desk frame design, illustrating collision detection and the powerful dual motor system.

6. Întreținere

Regular maintenance ensures the longevity and optimal performance of your VIVO Sit-Stand Desk.

  • curatenie: Ștergeți suprafața și cadrul biroului cu o lavetă moale șiamp Evitați produsele de curățare abrazive sau substanțele chimice dure.
  • Verificare cablu: Periodically inspect all cables for wear or damage. Ensure they are securely connected and not pinched.
  • Verificarea elementelor de fixare: La fiecare câteva luni, verificați toate șuruburile și bolțurile pentru a vă asigura că sunt strânse. Strângeți-le din nou dacă este necesar.
  • Limită de greutate: Do not exceed the maximum weight capacity of 220 lbs to prevent strain on the motors and frame.

7. Depanare

Dacă întâmpinați probleme cu biroul dvs., consultați următoarele probleme frecvente și soluții.

ProblemăCauza posibilaSoluţie
Biroul nu se mișcă.Power cable disconnected, motor overload, control panel issue.Check power connections. Unplug and replug the power cord. Reduce weight on the desk. Perform a reset (refer to control panel instructions, usually holding 'S' or a combination of buttons).
Biroul se mișcă neuniform sau scoate zgomote neobișnuite.Sarcină neuniformă, elemente de fixare slăbite, obstrucție.Ensure weight is evenly distributed. Check and tighten all assembly fasteners. Remove any obstructions.
Memory presets are not working.Presetările nu au fost salvate corect.Re-save your desired height settings following the instructions in Section 5.2.

If the problem persists, please contact VIVO customer support for assistance.

8. Specificații

  • Număr de model: DESK-KIT-2W8B
  • Marca: VIVO
  • Dimensiuni produs: 29.5" D x 82.7" L x 24.5" H
  • Culoare: Black Top / White Frame
  • Stil: Modern
  • Material de baza: Oțel aliat
  • Tip material superior: Engineered Wood (Laminated)
  • Caracteristica speciala: Adjustable Height, Memory Presets, Collision Detection
  • Gama de inaltime: 24.5 inci până la 50.3 inci
  • Capacitate maximă de greutate: 220 lbs (100 kg)
  • Mecanism de ridicare: Motor electric dublu
  • Asamblare: Necesar (se recomandă 2 persoane)
  • Listat UL: Da
  • Greutatea articolului: 67 lire sterline

9. Garanție și asistență

VIVO provides a limited warranty for this product. For specific warranty details, please refer to the documentation included with your purchase or visit the official VIVO website-ul.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact VIVO customer support. Our U.S.-based support team is available to assist you.

Image depicting VIVO's U.S.-based customer support team.
Figure 9.1: VIVO offers U.S.-based support for customer assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.