Audio Array AM-W20 Magnetic Wireless Lapel Microphone Set Instruction Manual

1. Produs terminatview

The Audio Array AM-W20 is a magnetic wireless lapel microphone set designed for high-fidelity audio recording. It features one-touch smart noise reduction, 48KHz/24Bit Hi-fi recording capabilities, a 50-meter wireless range, and an 800mAh battery providing up to 48 hours of operation with the charging case. This microphone is suitable for various applications including vlogging, podcasting, and streaming.

Image: The Audio Array AM-W20 Magnetic Wireless Lapel Microphone Set, including the transmitter, receiver, and charging case.

Caracteristici cheie:

• Înregistrare de înaltă fidelitate: 48kHz/24bit audio capture with a 70dB signal-to-noise ratio.
• Reducere inteligentă a zgomotului: One-touch activation for clear voice recordings in noisy environments.
• Rază wireless extinsă: Up to 50 meters (164 feet) of uninterrupted working range.
• Durată lungă de viață a bateriei: Până la 4 ore cu o singură încărcare și până la 48 de ore cu carcasa de încărcare.
• Universal Compatibilitate: Supports iOS (with Type-C to Lightning adapter) and Android devices (Type-C/USB-C ports) with OTG support.
• Magnetic Clip Design: Allows for versatile and secure positioning.

Image: Visual representation of the AM-W20's key features, including compatibility, magnetic clip, wireless technology, audio quality, range, battery life, and noise cancellation.

2. Instrucțiuni de configurare

2.1 Initial Pairing and Connection

The Audio Array AM-W20 system is pre-paired at the factory for immediate use. No manual pairing is required for initial setup.

1. Încărcați dispozitivele: Ensure both the transmitter (TX) and receiver (RX) are fully charged using the provided charging case.
2. Conectați receptorul: Plug the receiver (RX) into the Type-C or USB-C port of your recording device (smartphone, tablet, etc.). For iOS devices, use the included Type-C to Lightning adapter.
3. Pornirea transmițătorului: Take the transmitter (TX) out of the charging case. It will automatically power on and connect to the receiver.
4. Verificați conexiunea: A solid indicator light on both the transmitter and receiver typically signifies a successful connection.

Image: Visual guide demonstrating the three-step plug-and-play connection process: 1. Plug in the receiver, 2. Turn on the transmitter, 3. Devices are connected.

2.2 Device Compatibility and OTG Function

The AM-W20 is compatible with a wide range of devices, including iPhones, iPads, and Android smartphones/tablets with Type-C or USB-C ports. OTG (On-The-Go) support is essential for Android devices.

• Dispozitive iOS: Use the provided Type-C to Lightning adapter.
• Dispozitive Android: Ensure your device supports OTG. Some Android smartphones require you to manually enable the OTG function in their settings for external microphones to work correctly.

Image: Illustration of the AM-W20's broad compatibility with various mobile devices and applications.

Image: Guide for Android users on enabling OTG and configuring the 'Open Camera' app for external microphone use.

3. Instrucțiuni de utilizare

3.1 Pornire/Oprire

The transmitter (TX) automatically powers on when removed from the charging case. To manually power on or off, press and hold the power button on the transmitter.

3.2 Noise Cancellation (ANC Mode)

The AM-W20 features a smart noise reduction function to minimize background interference.

• Activare: Press the yellow button on the transmitter once to activate noise cancellation. A green indicator light will illuminate on the transmitter.
• Dezactivare: Press the yellow button again to deactivate noise cancellation.
• Activare automată: Noise cancellation is active automatically when the transmitter is turned on.

Image: The AM-W20 transmitter highlighting the yellow button for one-tap noise cancellation.

3.3 Funcția Mute

To temporarily mute the microphone during recording:

• Activare/Dezactivare: Double-tap the power button on the transmitter.

Image: Explanation of Audio Modes, showing single tap for ANC and double tap for Mute.

3.4 Microphone Positioning

The AM-W20 features a magnetic clip for flexible and secure attachment.

• Atașament magnetic: Use the magnetic clip to attach the microphone to clothing or other surfaces.
• Plasare optimă: For best audio quality, position the microphone approximately 6-8 inches (15-20 cm) below your mouth, centered on your chest. Avoid placing it directly under your chin or too close to your mouth to prevent plosives and distortion.

Image: Demonstrates various ways to wear the microphone, including magnetic attachment, necklace style, and traditional clip.

4. Întreținere

4.1 Charging the Microphone Set

The AM-W20 microphone set is powered by an internal rechargeable battery. The charging case provides extended battery life.

• Durata de viață a bateriei transmițătorului: Până la 4 ore cu o singură încărcare.
• Durata totală de viață a bateriei cu carcasă: Până la 48 ore.
• Încărcare: Place the transmitter and receiver into the charging case. Connect the charging case to a power source using a standard USB-C cable. The indicator lights on the case will show the charging status.

Image: Visual display of the AM-W20's battery performance, indicating 4 hours of use per charge and 48 hours with the charging case.

4.2 Curățarea și depozitarea

• curatenie: Use a soft, dry cloth to clean the microphone and charging case. Avoid using liquids or abrasive cleaners.
• Depozitare: Store the microphone set in its charging case in a cool, dry place away from direct sunlight and extreme temperatures.

5. Depanare

If you encounter issues with your Audio Array AM-W20, refer to the following common troubleshooting steps:

• Microphone Disconnects:
  • Ensure the receiver is securely plugged into your device.
  • Check the battery level of both the transmitter and receiver.
  • Verify that there are no significant obstacles or sources of interference within the 50-meter range.
  • Pentru dispozitivele Android, confirmați dacă funcția OTG este activată în setările telefonului.
• Poor Audio Quality / Disturbance / Shrieking Sound:
  • Anularea zgomotului: Ensure noise cancellation is activated (green light on TX). If recording in extremely noisy environments, some residual noise may still be present.
  • Plasarea microfonului: Avoid placing the microphone too close to your mouth or directly under your chin. Optimal placement is typically 6-8 inches below the mouth.
  • Volum de înregistrare: If experiencing a shrieking sound, the input volume might be too high. Adjust the recording volume settings on your device if possible.
  • Interferență: Depărtați-vă de alte dispozitive wireless sau de câmpuri electromagnetice puternice care ar putea cauza interferențe.
• Probleme de încărcare:
  • Ensure the USB-C charging cable is fully inserted into both the charging case and the power adapter.
  • Try a different USB-C cable and power adapter to rule out faulty accessories.
  • Check for any debris in the charging ports of the case or devices.
• No Sound Recording (Android):
  • Enable OTG in your phone's settings.
  • Use a third-party camera app like 'Open Camera' and ensure 'External mic' is selected as the audio source in its settings.

6. Specificații

7. Garanție și asistență

For product support, technical assistance, or warranty inquiries, please contact Audio Array customer service using the information below:

• Telefon: +91 9372146440
• E-mail: support@audioarray.in

Image: Audio Array customer support details, including phone number and email for assistance.

Vă rugăm să păstrați dovada achiziției pentru orice reclamații în garanție.