MIRADOR 111S

Manual de utilizare pentru foișorul cu pergolă rotundă Mirador 111S

Model: 111S (10' x 10' White)

1. Introducere și Pesteview

This manual provides essential instructions for the assembly, operation, and maintenance of your Mirador 111S Round Louvered Pergola Gazebo. Please read all instructions carefully before beginning assembly or use to ensure safe and proper functionality.

Caracteristici cheie:

  • Distinctive Rounded Pillar Design: Features a powder-coated aluminum frame with unique rounded pillar edges.
  • Acoperiș cu jaluzele reglabile: Tilting louvered roof made of galvanized steel, adjustable from 0° to 90° for sun, rain, and wind protection.
  • Innovative Drainage System: Patented Integrated Water Drainage channels rainwater to columns and drains through notches at the base.
  • Construcție durabilă: Full aluminum frame designed to resist winds up to 70 mph.

2. Informații și precauții de siguranță

  • Acumularea de zăpadă: To prevent potential damage, avoid snow accumulation on the louver roof.
  • High Winds/Extreme Weather: In high winds or extreme weather conditions, open the louvers and elevate or remove any shade screen accessories.
  • Ground Fastening: Securely fasten the structure to the ground using the provided expansion bolts.
  • Permise: This structure may require a permit. Consult with your local city, municipality, and relevant HOA guidelines for building codes and zoning requirements before purchase.
  • Servicii de instalare: MIRADOR does not provide installation services. Third-party services listed on the order page are independent.

3. Conținutul pachetului

The Mirador 111S Pergola is delivered in multiple cartons. Carefully unpack all boxes and verify that all components are present and undamaged before beginning assembly. Refer to the included parts list in your physical manual for a detailed inventory.

Componentele tipice includ:

  • Aluminum frame posts and beams
  • Galvanized steel louver blades
  • Louver adjustment mechanism (crank handle)
  • Base plates and covers
  • Fasteners (screws, bolts, washers) and tools (Allen wrench)
  • Integrated water drainage components

4. Instrucțiuni de instalare și asamblare

Assembly requires at least two people due to the size and weight of components. Ensure you have adequate space and all necessary tools before starting.

Etapele Adunării Generale:

  1. Pregătiți zona: Clear and level the installation site.
  2. Despachetați componente: Carefully unbox all parts and organize them according to the parts list.
  3. Assemble Posts and Bases: Attach the base plates to the bottom of each post.
  4. Construiți cadrul principal: Connect the horizontal beams to the top of the posts to form the main pergola structure. Ensure all connections are secure but do not fully tighten bolts until the frame is squared.
  5. Install Louver Mechanism: Attach the louver adjustment mechanism to the frame as per the detailed instructions.
  6. Install Louver Blades: Carefully insert and secure each louver blade into the frame and connect them to the adjustment mechanism.
  7. Fixare la masă: Once the frame is fully assembled and squared, use the provided expansion bolts to securely fasten the pergola to your concrete or wooden patio.

Video de asamblare:

Video: Mirador Louvered Pergola 111DA/111S/111SR 4 Legs - Assembly. This video demonstrates the assembly process for a similar Mirador louvered pergola model, providing visual guidance for key steps.

Illustrative Images:

Rounded pillar design of the Mirador pergola

Image: Close-up of the distinctive rounded pillar design at the base of the pergola post.

Crank handle for adjusting pergola louvers

Image: Illustration of the crank handle mechanism used to adjust the angle of the louvered roof.

5. Instrucțiuni de utilizare

Louver Adjustment:

The louvered roof can be adjusted from 0° (fully closed) to 90° (fully open) using the integrated crank handle. Turn the handle clockwise to close the louvers and counter-clockwise to open them. This allows you to control sunlight, provide shade, or allow full sun exposure.

Integrated Drainage System:

The pergola features a patented drainage system. When the louvers are closed during rain, water is channeled into the internal gutters within the frame. This water then flows down through the hollow posts and exits via discreet notches at the base of the rounded pillars, keeping your patio dry.

Pergola louvers adjusting to allow sunlight

Image: Louvers adjusting to provide varying degrees of shade or full sunlight.

Pergola louvers closed during rain, showing water runoff

Image: Louvers in a closed position, demonstrating the interlocking design for rain protection and integrated drainage.

6. Întreținere

The Mirador 111S Pergola is designed for low maintenance. Its aluminum construction is weather-proof and rust-resistant.

curatenie:

  • Clean the frame and louvers periodically with mild soap and water.
  • Evitați produsele de curățare abrazive sau substanțele chimice dure care ar putea deteriora finisajul.
  • Ensure the drainage channels are clear of debris to prevent water buildup.

Îngrijire sezonieră:

  • During winter, avoid snow accumulation on the louver roof. Open the louvers to prevent damage from heavy snow loads.
  • In areas prone to extreme weather, consider additional anchoring or temporary disassembly if recommended by local guidelines.
Text stating 'Maintenance Free' with water droplets on a pergola post

Image: Visual representation highlighting the pergola's maintenance-free and weather-proof features.

7. Depanare

Louver Blades Not Adjusting Smoothly:

  • Check for any obstructions in the louver mechanism or between the blades.
  • Ensure all screws and connections in the adjustment system are properly tightened.
  • Apply a silicone-based lubricant to moving parts if friction is detected.

Acumularea de apă pe acoperiș:

  • Verify that the louvers are fully closed and interlocked during rain.
  • Inspect the internal drainage channels and post notches for any blockages (leaves, debris).

Pergola Stability Issues:

  • Ensure all base plates are securely anchored to the ground using the provided expansion bolts.
  • Check all frame connections for tightness.
  • Verificați dacă suprafața de instalare este plană.

8. Specificații

AtributDetaliu
MarcaMIRADOR
Model111S
Dimensiunile produsului121.2"L x 121.2"W x 98.7"H (10' x 10')
Material cadruAluminiu
Materialul jaluzelelorOțel galvanizat
CuloareAlb
Nivel de rezistență la apăRezistent la apă
Protecție împotriva luminii ultravioleteDa
Rezistenta la vantPână la 70 mph
Asamblare necesarăDa

9. Garanție și asistență

Informații despre garanție:

The Mirador 111S Pergola comes with a 4-Year Worry-Free warranty. Please refer to the warranty card included with your product for specific terms and conditions.

Graphic indicating a 4-Year Worry Free warranty

Image: The Mirador 111S Pergola is backed by a 4-Year Worry-Free warranty.

Asistență clienți:

For any questions, missing parts, or assistance, please contact MIRADOR customer support. Refer to your product packaging or the official Mirador website pentru cele mai recente informații de contact.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.