Introducere
The NEBO Big Larry 2 is a versatile and durable work light designed for various tasks, offering both a powerful flashlight and a wide-area COB task lamp. Its magnetic base and compact design make it an essential tool for professionals and DIY enthusiasts alike. This manual provides detailed instructions for the proper use, care, and maintenance of your Big Larry 2.

Figure 1: NEBO Big Larry 2 Work Light, showcasing its sleek design and integrated COB light panel.
Caracteristicile produsului
- Iluminare dublă: Features a 200-lumen LED flashlight and a 500-lumen COB (Chip-on-Board) work light.
- Mai multe moduri de lumină: Includes High (flashlight), COB Work Light, COB Red Task Light, and Red Hazard Flasher.
- Reglabil: All light modes are fully dimmable.
- Baza magnetica: Powerful magnetic base for hands-free operation.
- Construcție durabilă: Anodized aircraft-grade aluminum body, water and impact-resistant.
- Clip de buzunar: Integrated pocket clip for secure carrying and a hanging hole for versatile mounting.
- Rechemare memorie de putere: Reține ultimul mod de iluminare utilizat.
- Direct-to-Red Functionality: Allows direct access to red light mode to preserve night vision.
- Alimentat cu baterie: Operates on 3 AA alkaline batteries (included).

Figure 2: Internal components and features of the Big Larry 2, highlighting the COB worklight, flashlight, and pocket clip.

Figure 3: Visual representation of the four distinct light modes: Dimmable Flashlight, COB Worklight, Red Light, and Red Hazard Flasher.
Înființat
1. Instalarea bateriei
- Unscrew the tail cap of the Big Larry 2 by turning it counter-clockwise.
- Insert three (3) AA alkaline batteries into the battery compartment, ensuring correct polarity (+/-) as indicated inside the compartment.
- Înșurubați capacul din spate în sensul acelor de ceasornic până când este strâns bine.
Nota: The Big Larry 2 comes with 3 AA alkaline batteries pre-installed. Remove the protective tab if present before first use.
Instrucțiuni de operare
Power Button and Mode Selection
The power button is located on the side of the flashlight, near the COB light panel. Press the button to cycle through the light modes:
- Prima apăsare: Flashlight (200 lumens)
- A doua apăsare: COB Work Light (500 lumens)
- A treia apăsare: COB Red Task Light (40 lumens)
- A 4-a apăsare: Red Hazard Flasher
- A 5-a apăsare: Oprit
The Big Larry 2 features Power Memory Recall, meaning it will turn on in the last mode used if powered off for more than 8 seconds.
Funcția de diminuare
To dim any active light mode (Flashlight, COB Work Light, or COB Red Task Light):
- With the desired mode active, press and hold the power button.
- The light will gradually dim or brighten. Release the button when the desired brightness level is reached.
Direct la roșu
To activate the Red Task Light directly from the OFF position (to preserve night vision):
- From OFF, press and hold the power button for 2 seconds. The Red Task Light will activate.
Magnetic Base and Pocket Clip
The powerful magnetic base allows you to attach the Big Larry 2 to any ferrous metal surface for hands-free illumination. The integrated pocket clip can be used to secure the light to clothing, belts, or other gear, and also functions as a hanging point.

Figure 4: Close-up of the strong magnetic base, enabling hands-free use on metal surfaces.

Figure 5: The versatile pocket clip and hanging hole for secure attachment and portability.
Întreţinere
- curatenie: Wipe the flashlight with a clean, damp pânză. Nu utilizați agenți de curățare abrazivi sau solvenți.
- Înlocuire baterie: Replace all three AA batteries simultaneously when the light output diminishes. Always use fresh, high-quality alkaline batteries.
- Depozitare: If storing the Big Larry 2 for an extended period (more than 30 days), remove the batteries to prevent leakage and potential damage to the device. Store in a cool, dry place.
- Durabilitate: The Big Larry 2 is water and impact-resistant, but it is not designed for submersion in water. Avoid dropping it from significant heights.

Figure 6: The anodized aircraft-grade aluminum body, designed for durability and corrosion resistance.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Lumina nu se aprinde. |
|
|
| Lumina este slabă sau pâlpâie. |
|
|
| Nu se poate comuta între moduri. |
|
|
Specificații
| Caracteristică | Detaliu |
|---|---|
| Numărul de model | NEB-WLT-0001 |
| Sursă de lumină | LED (Flashlight), COB (Work Light) |
| Brightness (Flashlight) | 200 lumeni |
| Brightness (COB Work Light) | 500 lumeni |
| Brightness (COB Red Task Light) | 40 lumeni |
| Sursa de alimentare | 3 x baterii alcaline AA |
| Material | Oțel aliat, aluminiu |
| Dimensiuni (L x L x A) | 7.75 cm x 0.98 cm x 1.25 cm |
| Greutate | 0.45 lbs (7.2 uncii) |
| Rezistenta la apa | Rezistent la apă |
Informații despre garanție
The NEBO Big Larry 2 Work Light comes with a limited warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official NEBO webPăstrați dovada achiziției pentru reclamații în garanție.
Asistență pentru clienți
If you have any questions, require technical assistance, or need to report an issue with your NEBO Big Larry 2, please contact NEBO customer support. You can find contact information on the official NEBO website: nebo.acgbrands.com.
Informații importante privind siguranța
- Nu priviți direct în lumina LED atunci când este aprinsă, deoarece poate cauza afectare temporară a vederii.
- A nu se lăsa la îndemâna copiilor.
- Nu amestecați baterii vechi cu noi sau diferite tipuri de baterii.
- Aruncați bateriile în conformitate cu reglementările locale.
- Nu încercați să dezasamblați sau să modificați lanterna, deoarece acest lucru va anula garanția și ar putea provoca daune sau vătămări corporale.