Phanteks Revolt 1200W 80PLUS Platinum ATX 3.0 PCIe 5.0 Power Supply Unit Instruction Manual

1. Introducere

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Phanteks Revolt 1200W 80PLUS Platinum Power Supply Unit. Please read this manual thoroughly before installation and retain it for future reference.

The Phanteks Revolt series power supplies are designed for high performance, offering full support for Intel ATX 3.0 specifications and PCIe 5.0, with 80 Plus Platinum efficiency. This unit is sold without cables, allowing users to select custom modular cables (e.g., from CableMod) to suit their specific system requirements.

2. Informații de siguranță

AVERTIZARE: Improper installation or use can lead to equipment damage, electric shock, or serious injury. Always follow these safety guidelines:

• Ensure the power supply is disconnected from the AC power outlet before installation, removal, or any maintenance.
• Această sursă de alimentare este concepută exclusiv pentru utilizare în sisteme informatice. Nu o utilizați în niciun alt scop.
• Nu deschideți sursa de alimentare. Volum ridicattagÎn interior sunt prezente piese și nu există piese care pot fi reparate de utilizator. Deschiderea unității va anula garanția.
• Instalați sursa de alimentare într-o zonă bine ventilată, ferită de surse de căldură, lumina directă a soarelui și umiditate.
• Use only approved and compatible modular cables. This power supply unit does not include cables; they must be purchased separately.
• Ensure all connectors are securely seated before powering on the system.
• A nu se lăsa la îndemâna copiilor.

Caracteristici de protecție: The Phanteks Revolt power supply includes multiple protection mechanisms to ensure system stability and safety:

• OPP (Overpower Protection): Prevents damage from excessive total power output.
• OVP (Peste Voltage Protecție): Safeguards components from voltage vârfuri.
• UVP (sub voltage Protecție): Protejează împotriva volumului insuficienttage livrare.
• SCP (Protecție la scurtcircuit): Previne deteriorarea cauzată de scurtcircuite.
• OCP (protecție la supracurent): Protects against excessive current on individual rails.
• OTP (protecție la supratemperatură): Shuts down the unit if internal temperatures become too high.
• Protecție fără sarcină: Ensures stable operation even without a load.
• Protecție la resetare: Allows the unit to recover safely after a protection event.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în colet:

• 1x Phanteks Revolt 1200W Power Supply Unit (Model: PH-P1200PR_BK01C)
• 1x C14 (female) - C13 (male) Power cord (1500mm)
• 1x User’s manual (this document)
• 1x Ghid de instalare
• 1x PSU bag
• 1x Zip tie bag
• 1x pachet de șuruburi
• 1x Velcro pack
• 1x PSU tester

Note: Modular cables are NOT included with this power supply unit and must be purchased separately.

4. Produs terminatview

4.1 Caracteristici cheie

• 1200W DC Output: Oferă ample power for high-performance systems.
• Certificare 80 PLUS Platinum: Achieves up to 94% efficiency at 50% load, reducing power consumption and heat.
• Compatibil cu ATX 3.0 și PCIe 5.0: Fully supports the latest Intel ATX 3.0 specifications and includes a 12VHPWR connector for PCIe 5.0 GPUs, delivering up to 600W.
• Design complet modular: Allows for custom cable selection and improved cable management. Cables are sold separately.
• Ventilator cu rulment fluidodinamic (FDB) de 135 mm: Ensures quiet and efficient cooling with hybrid fan control for silent operation.
• High Peak Power Capability: Designed to handle power peaks up to 235% of its rated output, exceeding industry standards.
• Seasonic Collaboration: Developed with Seasonic to ensure high standards of performance and reliability.

4.2 Physical Dimensions and Components

The Phanteks Revolt 1200W PSU measures 160 mm (L) x 150 mm (W) x 86 mm (H) (6.3 in x 5.9 in x 3.4 in) and weighs 2.26 kg (4.98 lbs).

Faţă View (Fan Side)

Modular Cable Connectors

Custom Cable Compatibility

Internal Design (Seasonic Platform)

Important Note: Cables Not Included

Panoul din spate

Revolt Series Comparison

5. Configurare și instalare

Before proceeding, ensure your system is powered off and disconnected from the AC outlet. Refer to your computer case and motherboard manuals for specific installation instructions.

5.1 Pregătirea pentru instalare

1. Gather Components: Ensure you have the Phanteks Revolt PSU, your chosen modular cables (not included), mounting screws, and your computer case.
2. Descărcare statică: Ground yourself to prevent electrostatic discharge (ESD) by touching a grounded metal object before handling components.

5.2 Instalarea sursei de alimentare

1. Montați sursa de alimentare: Carefully slide the Phanteks Revolt PSU into the designated power supply bay in your computer case. Secure it with the provided screws.
2. Conectați cablurile modulare: This PSU is fully modular. Connect only the necessary cables to the PSU's modular ports. Refer to the "Modular Cable Connectors" image in Section 4.2 for port identification.
   • Connect the 18+10pin cable to the motherboard.
   • Connect 8pin cables for CPU and PCIe as required by your motherboard and graphics card(s). The 12VHPWR connector is specifically for PCIe 5.0 GPUs.
   • Connect 6pin cables for SATA devices (SSDs, HDDs) and Molex peripherals.
3. Traseul cablurilor: Route the connected cables neatly through your case for optimal airflow and aesthetics.
4. Conectarea la componente: Connect the other end of each modular cable to its respective component (motherboard, CPU, GPU, storage drives, etc.). Ensure all connections are firm and secure.
5. Cablu de alimentare AC: Connect the provided C14-C13 AC power cord to the PSU's AC inlet. Do not connect to a wall outlet yet.

6. Instrucțiuni de utilizare

6.1 Pornirea inițială

1. After all internal connections are made and secured, connect the AC power cord from the PSU to a grounded wall outlet or surge protector.
2. Flip the main power switch on the rear of the PSU to the "ON" (I) position.
3. Power on your computer system using the case's power button.

6.2 Hybrid Fan Control

The Phanteks Revolt PSU features a 135mm Fluid Dynamic Bearing fan with hybrid fan control. A switch on the rear panel allows you to toggle between fan modes:

• Hybrid Mode (Default): The fan remains off under low loads for silent operation and only spins up when the power supply reaches a certain temperature or load threshold.
• Mod mereu pornit: The fan operates continuously, providing constant cooling. This mode may result in slightly higher noise levels but ensures maximum cooling performance.

Select the mode that best suits your preference for noise and cooling.

7. Depanare

If your system does not power on or experiences instability, refer to the following common troubleshooting steps:

• Fără putere:
  • Asigurați-vă că este conectat corect cablul de alimentare CA atât la sursa de alimentare, cât și la priza de perete.
  • Verify the main power switch on the PSU is in the "ON" (I) position.
  • Check the wall outlet or surge protector for power. Try a different outlet.
  • Use the included PSU tester to verify if the power supply is functioning independently.
• Instabilitate a sistemului/Opriri aleatorii:
  • Ensure all modular cables are firmly connected to both the PSU and the components. Loose connections can cause instability.
  • Verify that you are using the correct cables for each component (e.g., CPU power to CPU, PCIe power to GPU).
  • Check for any signs of overheating. Ensure proper airflow within your case.
  • If using the hybrid fan mode, try switching to "Always On" mode to see if it resolves temperature-related issues.
• Ventilatorul nu se învârte:
  • In hybrid fan mode, the fan will not spin under low loads or temperatures. This is normal operation.
  • If the fan does not spin even under load or in "Always On" mode, contact Phanteks support.
• Miros de ars sau fum:
  • Immediately disconnect the AC power cord from the wall outlet. Do not attempt to power on the system again.
  • Contact Phanteks support immediately.

For further assistance, please refer to the Phanteks support website-ul sau contactați serviciul pentru clienți.

8. Specificații

9. Garanție și asistență

9.1 Garanția producătorului

The Phanteks Revolt 1200W Power Supply Unit is covered by a Garanție de 1 an de la producător de la data achiziției. Această garanție acoperă defectele de materiale și de fabricație în condiții normale de utilizare. Vă rugăm să păstrați dovada achiziției pentru reclamațiile în garanție.

Garanția nu acoperă daunele rezultate din:

• Instalare sau operare necorespunzătoare.
• Modificări sau reparații neautorizate.
• Accidental damage, abuse, or misuse.
• Natural disasters or external causes.

Opening the power supply unit will void the warranty.

9.2 Suport tehnic

For technical assistance, troubleshooting, or warranty inquiries, please visit the official Phanteks website-ul sau contactați serviciul lor de asistență pentru clienți:

Asistență Phanteks Website-ul

Please have your product model number (PH-P1200PR_BK01C) and proof of purchase ready when contacting support.