CONTEC CMS50Q1

CONTEC CMS50Q1 Fingertip Pulse Oximeter User Manual

Model: CMS50Q1

1. Introducere

The CONTEC CMS50Q1 Fingertip Pulse Oximeter is a portable, non-invasive device designed for spot-checking of oxygen saturation (SpO2) and pulse rate (PR) through the finger. It is specifically designed for individuals with small fingers, such as children, and is suitable for sports and aviation use. This device is not intended for medical diagnosis or treatment.

Important Note: This device is for Sports or Aviation use only and is not a medical device. Consult a healthcare professional for any medical concerns.

2. Produs terminatview

2.1 Caracteristici cheie

  • Small Finger Design: Specifically designed to fit finger diameters greater than 0.2 inch (5mm), making it suitable for children.
  • Accurate & Fast Results: Provides quick and precise measurements of SpO2 and pulse rate.
  • Afișaj clar: Features a digital rotatable TFT display showing SpO2 value, pulse rate value, bar graph, and pulse waveform.
  • Operare ușoară: Simple one-button operation for power on and measurement.
  • Design confortabil: Fingertip clip made with silica gel material for comfort.
  • Durată lungă de viață a bateriei: Offers 20-30 hours of battery life with automatic power-off after 5 seconds of inactivity.

2.2 Ce se află în cutie

  • CONTEC CMS50Q1 Pulse Oximeter (Main Unit)
  • Şnur
  • Manual de utilizare
  • Cartoon Stickers
  • Șurubelniță (pentru compartimentul bateriei)

2.3 Componentele produsului

Diagram showing the components of the CONTEC CMS50Q1 Pulse Oximeter, including Lanyard Loop Hole, Pulse Rate Bar Graph, SPO2 (Blood Oxygen) display, Low Battery Indicator, Heart Rate display, Battery Cover, and Power Button.

This image illustrates the various parts of the CMS50Q1 Pulse Oximeter, including the display elements and physical features like the lanyard loop hole and battery cover.

3. Configurare

3.1 Instalarea bateriei

  1. Locate the battery compartment on the back of the oximeter.
  2. Use the provided screwdriver to loosen the screw on the battery cover.
  3. Scoateți capacul bateriei.
  4. Insert two AAA batteries (not included) into the compartment, ensuring correct polarity (+/-).
  5. Replace the battery cover and secure it with the screw using the screwdriver. This screw helps prevent accidental battery access, especially for children.
Step-by-step guide on how to use the CONTEC CMS50Q1 Pulse Oximeter, showing battery installation, finger placement, and reading results.

This image demonstrates the battery installation process and subsequent steps for taking a measurement.

3.2 Atașarea șnurului

Thread the thin loop of the lanyard through the lanyard loop hole on the oximeter. Then, pass the larger part of the lanyard through the thin loop and pull gently to secure it. This allows for convenient carrying.

Images showing the CONTEC CMS50Q1 Pulse Oximeter dimensions, included cartoon stickers, and how to attach the lanyard.

This image shows the device dimensions and how to attach the included lanyard.

4. Instrucțiuni de utilizare

4.1 Luarea unei măsurători

  1. Asigurați-vă că oximetrul are bateriile instalate.
  2. Open the clip of the oximeter.
  3. Insert one of your fingers (preferably the index finger) into the rubber opening of the oximeter, ensuring the finger is placed correctly and fully inside. The device is designed for finger diameters greater than 0.2 inch (5mm).
  4. Apăsați butonul de alimentare o dată pentru a porni oximetrul.
  5. Țineți mâna nemișcată și evitați mișcarea în timpul măsurării.
  6. The SpO2 and pulse rate readings will appear on the display within a few seconds.

4.2 Display Orientation

The display of the CMS50Q1 Pulse Oximeter can rotate automatically to provide optimal viewing from different angles. Simply adjust the device's orientation, and the display will adapt.

Four images showing the CONTEC CMS50Q1 Pulse Oximeter display rotating to match the device's orientation.

This image demonstrates the rotatable display feature of the oximeter.

4.3 Oprire automată

The device will automatically power off after approximately 5 seconds of inactivity (when no finger is detected) to conserve battery life.

5. Afișați informații

The TFT display provides the following information:

  • SpO2 (%): Blood Oxygen Saturation level.
  • PRbpm: Ritmul pulsului în bătăi pe minut.
  • Grafic de bare: O reprezentare vizuală a intensității pulsului.
  • Formă de undă a impulsului: A graphical representation of the pulse.
  • Indicator baterie descărcată: An icon indicating when batteries need replacement.
Close-up of the CONTEC CMS50Q1 Pulse Oximeter display showing SpO2 (98%) and PRbpm (75) readings along with a pulse waveform.

This image shows a typical display reading with SpO2, PRbpm, and the pulse waveform.

6. Întreținere și îngrijire

6.1 Curățarea oximetrului

  • Curățați suprafața oximetrului înainte și după fiecare utilizare cu o lavetă moale.ampened with medical alcohol (70% ethanol or isopropanol).
  • Nu scufundați dispozitivul în apă sau în alte soluții de curățare.
  • Asigurați-vă că dispozitivul este complet uscat înainte de reutilizare.

6.2 Înlocuirea bateriei

When the low battery indicator appears on the display, replace the batteries promptly. Follow the battery installation steps in Section 3.1.

6.3 Depozitare

Store the oximeter in a cool, dry place away from direct sunlight, extreme temperatures, and humidity. If the device will not be used for an extended period, remove the batteries to prevent leakage.

7. Depanare

ProblemăCauza posibilaSoluţie
Fără afișaj după pornireBateriile sunt descărcate sau instalate incorect.Replace batteries or reinstall them with correct polarity.
Display shows '---' or unstable readingsDeget introdus necorect; mișcare excesivă; deget rece; ojă.Reinsert finger correctly; remain still; warm the finger; remove nail polish.
Dispozitivul se oprește automatNormal auto-off function (5 seconds inactivity) or low battery.This is normal behavior. If unexpected, check battery level.
Difficulty opening battery coverScrew is too tight or cover is stiff.Use the provided screwdriver. Apply gentle, even pressure to slide the cover after unscrewing.

8. Specificații

  • Dimensiuni produs: 2.32 x 1.42 x 1.38 inci
  • Greutatea articolului: 3.52 uncii
  • Measuring Range SpO2: 70-100%
  • Measuring Range Pulse Rate: 0-250 bpm
  • Durata de viață a bateriei: Aproximativ 20-30 ore
  • Sursa de alimentare: 2 x baterii AAA (nu sunt incluse)
  • Oprire automată: După 5 de secunde de inactivitate
  • Producător: Contec Medical Systems Co.,Ltd

9. Informații de siguranță

  • Acest dispozitiv este destinat exclusiv utilizării în sport și aviație. Nu este un dispozitiv medical și nu trebuie utilizat pentru diagnostic sau tratament medical.
  • Do not use the oximeter during sports activities, as movement can affect accuracy.
  • Keep the device out of reach of small children to prevent choking hazards from small parts like batteries or the lanyard.
  • Avoid exposing the device to direct sunlight, high temperatures, or moisture.
  • Do not attempt to repair or modify the device yourself. Contact support if issues arise.

10. Informații de asistență

For technical support or inquiries regarding your CONTEC CMS50Q1 Pulse Oximeter, please contact the manufacturer using the details below:

Please refer to the official CONTEC webconsultați site-ul sau documentația de achiziție pentru termenii și condițiile specifice de garanție.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.