BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Introducere

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Caracteristicile produsului

• Integrated Motion Sensor: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Adjustable Hold Time: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Trei moduri de operare:
  • Mod auto: Light activates when motion is detected in dark conditions.
  • Modul ON: Light remains constantly on.
  • Modul G: Light activates when motion is detected in both daytime and nighttime conditions.
• Trei temperaturi de culoare: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Design ultra-subțire: Low-profile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Instalare versatilă: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Conținutul pachetului

Verificați dacă toate componentele sunt prezente înainte de a începe instalarea:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x Manual de instrucțiuni (acest document)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Informații de siguranță

AVERTIZARE: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ensure the power supply is OFF before handling any wiring.
• This fixture is designed for 120V AC power supply.
• Nu încercați să modificați dispozitivul de fixare.
• Țineți copiii departe de zona de instalare.

Configurare și instalare

Urmați acești pași pentru o instalare corectă:

1. Pregătiți pentru instalare:
   • Opriți alimentarea cu energie de la întrerupătorul de circuit înainte de pornire.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Instalați suportul de montare:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Conexiuni prin cablu:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Montați corpul de iluminat:
   • Introduceți cu grijă toate firele în cutia de joncțiune.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Restabiliți puterea: Reporniți alimentarea la întrerupător.

Figura 4: Ghid vizual pentru procesul de instalare.

Instrucțiuni de operare

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Selectarea modului de operare:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • MAȘINĂ: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • PE: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 secunde
   • 120S: 120 de secunde (2 minute)
   • 180S: 180 de secunde (3 minute)

Figure 5: Switches for adjusting hold time and operating modes.

Întreţinere

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• curatenie: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Durată de viață a LED-urilor: The integrated LED light source has an average lifespan of 30,000 hours and is not user-replaceable.
• Inspecţie: Verificați periodic corpul de iluminat pentru orice semne de deteriorare sau conexiuni slăbite. Dacă găsiți probleme, deconectați alimentarea și consultați un electrician calificat.

Depanare

Dacă întâmpinați probleme cu corpul de iluminat, consultați următoarele probleme și soluții frecvente:

Specificații

Garanție și suport

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN webPăstrați bonul fiscal ca dovadă a achiziției.