Manual de instrucțiuni pentru suportul de birou VIVO STAND-V002W pentru două monitoruri

1. Introducere

This manual provides comprehensive instructions for the assembly, installation, operation, and maintenance of your VIVO STAND-V002W Dual Monitor Desk Mount. Please read this manual thoroughly before installation to ensure correct setup and safe usage. Retain this manual for future reference.

Conținutul pachetului

Verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact VIVO customer support.

• Main Pole with C-clamp baza
• Brațe pentru monitor dublu
• Plăci VESA (2x)
• Grommet Mount Option
• Set de accesorii (șuruburi, șaibe, chei Allen)
• Cleme de gestionare a cablurilor

2. Informații de siguranță

AVERTIZARE: Failure to understand and follow the instructions in this manual can result in serious personal injury, damage to the product, or property damage. Ensure all warnings and precautions are strictly observed.

• Do not exceed the weight capacity of 22 lbs (10 kg) per screen.
• Ensure your desk surface can support the combined weight of the mount and monitors.
• Only use this product on flat, straight-edge desktops. Lipped or beveled edges are not compatible.
• Păstrați piesele mici departe de copii.
• Strângeți ferm toate șuruburile, dar nu le strângeți prea tare. Strângerea excesivă poate deteriora componentele.
• Always use an assistant when lifting or positioning heavy equipment.

3. Caracteristicile produsului

• Suport pentru monitor dublu: Accommodates two screens ranging from 13 to 30 inches.
• Capacitate de greutate: Supports up to 22 lbs (10 kg) per monitor.
• Compatibilitate VESA: Supports 75x75mm and 100x100mm VESA patterns.
• Opțiuni de montare: Includes both heavy-duty C-clamp and bolt-through grommet options for desks up to 3.25 inches thick.
• Articulație completă: Offers +90° to -90° tilt, 180° swivel, and 360° rotation for flexible screen positioning.
• Reglarea înălțimii: Monitors can be adjusted along the central pole.
• Organizare de cabluri: Integrated clips help organize and conceal cables.

4. Specificații

5. Compatibilitate

Monitorizarea compatibilității

This mount is designed for monitors with VESA mounting patterns of 75x75mm or 100x100mm. Ensure your monitor's VESA pattern matches one of these standards. The mount supports monitors between 13 and 30 inches in size, with a maximum weight of 22 lbs (10 kg) per screen.

Figure 5.1: VESA and Screen Compatibility. This image illustrates the compatible VESA mounting patterns (75x75mm and 100x100mm) and the supported screen sizes (13-30 inches) and weight capacity (22 lbs per screen).

Desktop Compatibility

C-clamp and grommet mounting options are compatible with desktops up to 3.25 inches (8.25 cm) thick. This mount is designed for flat, straight-edge desktops only. It is incompatibil with lipped or beveled edge desks.

Figure 5.2: Desktop Compatibility. This image details the C-clamp and grommet mounting options, showing a maximum desktop thickness of 3.25 inches. It also explicitly states that lipped or beveled edge desktops are not compatible.

6. Configurare și instalare

Follow these steps carefully for proper installation. It is recommended to have an assistant for monitor attachment.

Pasul 6.1: Alegeți metoda de montare

Decide whether to use the C-clamp or the grommet mount. The C-clamp attaches to the edge of your desk, while the grommet mount requires a pre-existing hole or drilling a new one (ensure no structural damage or wires are present before drilling).

Figure 6.1: Mounting Options. This image displays the complete dual monitor mount assembly, with the C-clamp attached to the main pole and the separate grommet mounting hardware shown to the side.

Step 6.2: Assemble the Base (C-clamp sau Inel de fixare)

Pentru C-clamp: Atașați C-clamp to the main pole and secure it to your desk edge. Tighten the clamp screw until the mount is stable.

For Grommet Mount: If using a grommet hole, feed the pole through the hole and secure it from underneath the desk using the provided plate and nut.

Step 6.3: Attach Monitor Arms to Pole

Slide the dual monitor arm assembly onto the main pole. Adjust the height to your desired position and tighten the locking collar.

Pasul 6.4: Atașați plăcile VESA la monitoare

Remove the VESA plates from the monitor arms. Attach each VESA plate to the back of your monitors using the appropriate screws from the hardware kit. Ensure the screws are securely tightened.

Pasul 6.5: Montați monitoarele pe brațe

Carefully slide the monitors (with attached VESA plates) onto the monitor arms. Ensure they click into place. Secure them with the safety screws if provided.

Figure 6.2: Mounted Monitors. This image shows two monitors successfully installed on the VIVO dual monitor desk mount, demonstrating a typical setup on a desk.

7. Operare și reglaje

The VIVO STAND-V002W offers various adjustment options to optimize your viewexperiență.

7.1 Reglarea înălțimii

To adjust the height of both monitors, loosen the locking collar on the main pole, slide the arm assembly to the desired height, and re-tighten the collar. Note that individual monitor height adjustment is limited to a small range via a screw on each VESA plate.

7.2 Reglarea înclinării

Monitors can be tilted +90° to -90°. Loosen the tilt knob or screw behind the VESA plate, adjust the monitor to the desired angle, and re-tighten.

7.3 Reglarea pivotării

The monitor arms can swivel 180° at the pole connection and at the monitor plate connection, allowing you to position your screens as needed.

7.4 Reglarea rotației

Monitors can be rotated 360° from landscape to portrait orientation. Simply rotate the monitor to achieve the desired orientation.

Figure 7.1: Articulation and Adjustments. This image demonstrates the full range of motion for the monitor arms, including tilt, swivel, and rotation, highlighting the flexibility for screen placement. An inset shows how to tighten a joint with an Allen wrench.

7.5 Managementul cablurilor

Utilize the integrated cable management clips along the arms and central pole to route and conceal your monitor cables for a tidy workspace.

8. Întreținere

• Verificați periodic toate șuruburile și conexiunile pentru a vă asigura că rămân strânse. Strângeți-le din nou dacă este necesar.
• Curățați suportul cu o lavetă moale,amp Evitați utilizarea de produse de curățare abrazive sau solvenți.
• Do not lubricate any parts of the mount unless specifically instructed by VIVO support.

9. Depanare

10. Garanție și asistență

This VIVO product is backed by a 3 an garanție de producător. For technical support, missing parts, or any questions or concerns, please contact VIVO customer support. Our U.S.-based support team is available to assist you.

For more information, visit the official VIVO store: Magazinul VIVO pe Amazon