GODOX FV150 High Speed Sync Flash LED Light

1. Introducere

The GODOX FV150 is a versatile hybrid lighting unit designed for both continuous LED lighting and high-speed sync flash photography. It combines the functionality of a traditional LED light with advanced flash capabilities, offering strong power, abundant features, and various special effects modes for creative shooting scenarios.

2. Caracteristicile produsului

• Funcționalitate hibridă: Operates as both a continuous LED light and a high-speed sync flash.
• Putere mare de ieșire: 150W LED light with flash brightness four times that of the LED light, enhancing freezing capability for instantaneous action.
• Sincronizare de mare viteză: Supports 1/8000s high-speed sync function.
• Fotografiere continuă: Over 10 continuous flashes per second at full power and 8 continuous flashes per second in HSS mode.
• Temperatura de culoare: Stable 5600K color temperature.
• Precizie mare a culorii: CRI 96+ for accurate color rendering.
• Built-in Wireless Receiver: Integrated Godox 2.4G wireless receiver (X system) compatible with Canon, Nikon, Sony, Fujifilm, Panasonic, Olympus, and Pentax camera systems.
• Extensive Control: Supports 16 groups and 32 channels for individual unit control.
• Special Effects Modes: Features 8 FX special effects modes to simulate various shooting scenes.
• LED reglabil: Precise 0% to 100% brightness dimming in LED continuous modes.
• Flash Power Adjustment: 1/8 to 1/1 or 7.0 to 10.0 power levels in flash modes, displayed as fractions or decimals.
• Muntele Bowens: Compatible with a wide range of Bowens mount light modifiers.
• Afișaj LCD clar: Large and clear LCD information panel for easy settings adjustment.
• Disiparea eficientă a căldurii: Designed for continuous and rapid use without overheating.

3. Componente incluse

Verificați dacă toate următoarele articole sunt incluse în pachetul dumneavoastră:

• 1x GODOX FV150 Light Unit
• 1x cablu de alimentare
• 1x telecomandă
• 1x Reflector standard
• 1x Lamp Acoperi
• 1x Pergear Cleaning Kit

Image: GODOX FV150 Light Unit with Standard Reflector attached.

4. Configurare

1. Montarea luminii: Attach the FV150 unit to a light stand using its U-type bracket. Secure it by tightening the adjustment knob on the bracket.
2. Putere de conectare: Insert the power cord into the AC input port on the back of the unit and plug the other end into a suitable power outlet (AC100-240V, 50/60Hz).
3. Atașarea modificatorilor: The FV150 features a Bowens mount. Align your desired light modifier (e.g., standard reflector, softbox, beauty dish) with the mount and twist until it locks securely.
4. Lamp Acoperi: Asigurați-vă că lamp cover is removed before operation to prevent heat buildup.

Image: GODOX FV150 unit mounted on a light stand, showing the U-type bracket.

Image: GODOX FV150 with the standard reflector attached to the Bowens mount.

5. Instrucțiuni de utilizare

5.1 Pornire/Oprire

Locate the ON/OFF switch on the back panel of the unit. Flip the switch to 'ON' to power on the light and to 'OFF' to power it down.

5.2 Mode Selection (LED / Flash)

Apăsați tasta LED button on the left side of the control panel to switch between continuous LED mode and Flash mode. The current mode will be displayed on the LCD screen.

5.3 Adjusting Brightness / Power

• In LED Mode: Rotiți DIM knob (SET dial) on the right side of the control panel to adjust the brightness from 0% to 100%.
• In Flash Mode: Rotiți DIM knob (SET dial) to adjust the flash power output. Options include fractional settings (1/8 to 1/1) or decimal settings (7.0 to 10.0).

Image: Close-up of the GODOX FV150 LCD display showing power settings and control buttons.

5.4 Control fără fir

The FV150 has a built-in Godox 2.4G wireless receiver. To use wireless control:

1. Apăsați tasta GR/CH button to select the desired group (A-F, 0-9).
2. Apăsați lung pe GR/CH button to enter channel selection mode, then rotate the SET dial to select a channel (1-32).
3. Ensure your Godox 2.4G wireless trigger (e.g., XPro, X2T) is set to the same group and channel as the FV150.

Image: Diagram showing the GODOX FV150 with compatible wireless triggers (XPro, X2T) for remote control.

5.5 Special Effects (FX Modes)

In LED mode, press the FX button on the left side of the control panel to cycle through 8 special effects modes. Rotate the DIM knob to select the desired effect (e.g., Flash1, Storm1, TV, Bad Bulb).

Image: GODOX FV150 control panel displaying the 8 FX special effects modes.

5.6 Flash Sync and Anti-Preflash Function

• Modul S1: The flash will trigger synchronously when it receives an external flash.
• S2 Mode (Anti-Preflash): The flash is triggered synchronously when it receives the second flash, ignoring the pre-flash from another unit.

6. Întreținere

• Păstrați dispozitivul uscat. Nu manipulați cu mâinile ude.
• Clean the equipment regularly with a soft, dry cloth. Avoid using solvents or harsh cleaning agents.
• Depozitați unitatea într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.
• Protect the LED light source from impact.

7. Depanare

• Light not powering on: Check if the power cord is securely connected and the ON/OFF switch is in the 'ON' position. Verify the power outlet is functional.
• Blițul nu se declanșează: Ensure the unit is in Flash mode. Check the wireless trigger settings (group, channel, ID off) and battery. Press the 'TEST' button on the unit to confirm internal flash function.
• Luminozitate inconsecventă: Verify power settings in both LED and Flash modes. Ensure no external factors are interfering with light output.
• Supraîncălzire: If the unit feels excessively hot, power it off and allow it to cool down. Ensure proper ventilation around the unit.

8. Specificații

9. Garanție și asistență

For warranty information and technical support, please refer to the documentation provided with your product or visit the official GODOX webPăstrați bonul fiscal ca dovadă a achiziției pentru orice reclamații în garanție.