Audio-Technica AT-LP60XBT

Audio-Technica AT-LP60XBT Turntable Instruction Manual

Introducere

Mulțumesc pentru achizițieasing the Audio-Technica AT-LP60XBT Bluetooth Fully Automatic Belt-Drive Turntable. This manual provides essential information for the proper setup, operation, and maintenance of your turntable. Please read this manual thoroughly before using the product to ensure correct usage and to prevent damage.

The AT-LP60XBT offers high-fidelity audio playback from your vinyl records with the convenience of wireless Bluetooth connectivity. It features fully automatic operation, a dual-speed belt-drive system, and a built-in switchable phono pre-ampmai în viață.

Informații de siguranță

Instrucțiuni importante de siguranță:

  • Nu expuneți acest aparat la ploaie sau umezeală.
  • Nu utilizați acest aparat lângă apă.
  • Curățați numai cu o cârpă uscată.
  • Nu blocați orificiile de ventilație. Instalați în conformitate cu instrucțiunile producătorului.
  • Nu instalați lângă nicio sursă de căldură, cum ar fi calorifere, registre de căldură, sobe sau alte aparate (inclusiv ampliificatori) care produc căldură.
  • Protejați cablul de alimentare să nu fie călcat sau ciupit, în special la prize, prize convenabile și la punctul de ieșire din aparat.
  • Utilizați numai atașamente/accesorii specificate de producător.
  • Toate lucrările de întreținere se adresează personalului de service calificat. Întreținerea este necesară atunci când aparatul a fost deteriorat în vreun fel, cum ar fi cablul de alimentare sau ștecherul este deteriorat, s-a vărsat lichid sau au căzut obiecte în aparat, aparatul a fost expus la ploaie sau umezeală, nu funcționează normal , sau a fost abandonat.

Conținutul pachetului

Verificați dacă toate următoarele articole sunt incluse în pachetul dumneavoastră:

  • Platan AT-LP60XBT
  • Capac de praf
  • Platter with drive belt
  • Mat de pâslă
  • Adaptor 45 RPM
  • RCA audio cable (approx. 1.2 m / 3.9')
  • adaptor de curent alternativ
  • Vinyl Record Cleaning Kit (may vary in components)
Vinyl Record Cleaning Kit components including cleaning fluid, brushes, and cloths.

Image: Components of the included Vinyl Record Cleaning Kit.

Numele și funcțiile părților

Familiarize yourself with the various parts of your turntable:

De sus în jos view of the Audio-Technica AT-LP60XBT turntable, showing the platter, tonearm, and control buttons.

Imagine: De sus în jos view of the AT-LP60XBT turntable.

  • Capac de praf: Protejează platanul și stylus-ul de praf.
  • platou: Susține înregistrarea.
  • Covoraș din pâslă: Placed on the platter to protect records and improve sound quality.
  • Ax: Menține recordul la locul lui.
  • Arme de ton: Ține cartusul și stiloul.
  • Cartridge/Stylus: Citește șanțurile discului.
  • Carcasă de cap: Part of the tonearm where the cartridge is mounted.
  • Butonul de start: Starts platter rotation and moves the tonearm to the record.
  • Butonul STOP: Stops platter rotation and returns the tonearm to its rest.
  • LIFT Button: Raises and lowers the tonearm manually.
  • Butonul SPEED: Selects playback speed (33-1/3 or 45 RPM).
  • Buton DIMENSIUNE: Selects record size (12" or 7").
  • Buton Bluetooth: Inițiază asocierea Bluetooth.
  • PHONO/LINE Switch: Selects output type (Phono for external phono preamp, Line for built-in preamp).
  • Mufe de ieșire RCA: Conectați-vă la un ampamplificator sau difuzoare amplificate.
  • Jack de intrare: Se conectează la adaptorul de curent alternativ.

Înființat

Urmați acești pași pentru a vă configura placa turnantă:

1. Despachetarea și plasarea

  • Scoateți cu grijă toate componentele din ambalaj. Păstrați ambalajul pentru transport sau depozitare ulterioară.
  • Place the turntable on a level surface, away from direct sunlight, heat sources, and excessive vibration.

2. Instalarea platoului și a curelei

  • Place the platter on the center spindle.
  • Locate the drive belt, which is pre-installed on the underside of the platter.
  • Align the small opening on the platter with the motor pulley. Using the red tab, pull the belt over the motor pulley. Ensure the belt is not twisted.
  • Așezați covorașul de pâslă pe platou.

3. Instalarea capacului anti-praf

  • Insert the hinges of the dust cover into the hinge holders on the back of the turntable body.
Audio-Technica AT-LP60XBT turntable with the dust cover open, showing the platter and tonearm.

Image: Turntable with dust cover open, ready for use.

4. Stylus Protection Removal

  • Before use, carefully remove the white plastic stylus protector from the cartridge. Pull it straight forward.

5. Conexiune audio

  • PHONO/LINE Switch: On the rear of the turntable, set the switch to PHONO if connecting to an amplifier with a dedicated PHONO input. Set to LINE if connecting to an amplifier's AUX/LINE input or powered speakers, utilizing the turntable's built-in pre-ampmai în viață.
  • Connect the RCA audio cable from the turntable's output jacks to the corresponding input on your ampamplificator sau difuzoare amplificate.

6. Conexiune la alimentare

  • Connect the AC adapter cable to the power input jack on the turntable.
  • Conectați adaptorul de curent alternativ la o priză standard de perete.

Operarea plăcii turnante

1. Redarea unei înregistrări

  1. Place a record on the felt mat.
  2. Select the appropriate speed (33-1/3 or 45 RPM) using the VITEZĂ button. For 7" singles, use the 45 RPM adapter if the record has a large center hole.
  3. Select the record size (12" or 7") using the DIMENSIUNE buton.
  4. Apăsați tasta ÎNCEPUT button. The platter will begin to rotate, and the tonearm will automatically move to the lead-in groove of the record and lower.
  5. Pentru a opri redarea, apăsați tasta STOP button. The tonearm will automatically return to its rest, and the platter will stop rotating.
  6. To manually lift or lower the tonearm during playback, press the LIFT buton.

2. Conectivitate Bluetooth

AT-LP60XBT se poate conecta wireless la difuzoare, căști sau alte dispozitive compatibile cu Bluetooth.

  1. Place your Bluetooth receiving device (e.g., speaker) in pairing mode. Refer to your device's manual for instructions.
  2. On the turntable, press and hold the Bluetooth button for approximately 2 seconds. The Bluetooth indicator light will flash rapidly, indicating the turntable is searching for devices.
  3. După conectare, indicatorul luminos Bluetooth va aprinde continuu în albastru.
  4. If pairing fails, ensure the turntable is within range of the Bluetooth device and try again.
  5. Pentru a deconecta, apăsați și mențineți apăsat butonul Bluetooth din nou butonul până când indicatorul luminos se stinge.

Întreţinere

Întreținerea regulată asigură performanța optimă și longevitatea pick-up-ului dumneavoastră.

1. Îngrijirea stylusului

  • The stylus tip is delicate. Avoid touching it with your fingers.
  • Curățați stylus-ul în mod regulat folosind o perie moale, frecându-l ușor din spate în față.
  • A dirty or worn stylus can damage records and degrade sound quality. Replace the stylus (Audio-Technica ATN3600L) after approximately 300-500 hours of use.

2. Turntable Cleaning

  • Ștergeți corpul platanului și capacul de praf cu o cârpă moale și uscată.
  • Nu utilizați substanțe chimice dure sau produse de curățare abrazive.

3. Record Cleaning Kit Usage

The included vinyl record cleaning kit helps maintain your record collection.

Vinyl record cleaning kit with a record in a cleaning basin, cleaning fluid bottles, and cloths.

Image: Vinyl record cleaning kit in use.

  1. Place a record into the cleaning basin.
  2. Apply a small amount of cleaning fluid to the record surface or the cleaning brushes as directed by the kit's specific instructions.
  3. Gently rotate the record within the basin, allowing the brushes to clean the grooves.
  4. Remove the record and dry it with the provided microfiber cloth, wiping in the direction of the grooves.
  5. Ensure records are completely dry before playing or storing.

Depanare

Dacă întâmpinați probleme, consultați următoarele probleme și soluții comune:

ProblemăCauza posibilaSoluţie
Fără putereAdaptorul de curent alternativ nu este conectat; Priza de alimentare nu este activă.Ensure AC adapter is securely connected to turntable and a working power outlet.
Fără sunet sau volum redusPHONO/LINE switch incorrect; RCA cables loose; Amplifier/speakers off or volume low; Stylus protector still on.Check PHONO/LINE switch setting; Secure RCA cable connections; Turn on amplifier/speakers and adjust volume; Remove stylus protector.
Sunet distorsionat sau cu sărituriDirty or damaged record; Dirty or worn stylus; Turntable not level; Excessive vibration.Clean record; Clean or replace stylus; Place turntable on a stable, level surface; Avoid placing near speakers.
Bluetooth nu se asociazăDispozitivul nu este în modul de asociere; În afara razei de acoperire; Interferență.Ensure receiving device is in pairing mode; Move devices closer; Turn off other Bluetooth devices.
Platter not rotatingDrive belt dislodged or broken; START button not pressed.Check and re-seat drive belt on motor pulley; Press START button.

Specificații

Technical specifications for the Audio-Technica AT-LP60XBT turntable:

CaracteristicăCaietul de sarcini
MarcaAudio-Tehnica
Numele modeluluiAT-LP60XBT
Tehnologia de conectivitateCu fir, fără fir (Bluetooth)
Viteza maximă de rotație45 RPM (also supports 33-1/3 RPM)
Caracteristica specialăConectivitate Bluetooth
MaterialPlastic
Greutatea articolului12.4 lire sterline
Sursa de alimentareElectric cu fir
Formatul semnaluluiAnalogic
Raportul semnal-zgomot60 dB
Componente incluseKit de curățare a discurilor de vinil

Garanție și suport

Audio-Technica products are designed to provide reliable performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Audio-Technica website-ul.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact Audio-Technica customer service or visit their official support page. Keep your purchase receipt as proof of purchase for warranty claims.

Audio-Technica Oficial Website: audio-technica.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.