Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Manual de utilizare Head

1. Introducere

The Hotone Nano Legacy British Invasion is a compact 5-watt guitar amplifier head designed to deliver classic British amplifier tones. This manual provides essential information for the safe and effective use of your amplifier. Please read it thoroughly before operation.

Caracteristici cheie:

Ultra-compact, portable ampcap lifier.
Inspired by the legendary Vox AC30 amplifier tone.
Separate Volume and Gain control knobs.
3-band EQ (Bass, Middle, Treble) for tone shaping.
Integrated FX Loop for external effects integration.

2. Instrucțiuni de siguranță

Alimentare electrică: Use only the specified 18V DC power adapter (center negative). Incorrect voltagPoate deteriora unitatea.
Ventilare: Asigurați o ventilație adecvată. Nu blocați orificiile de ventilație.
Umiditate: Keep the unit away from water or excessive moisture.
Căldură: Evitați amplasarea unității în apropierea surselor de căldură sau în lumina directă a soarelui.
curatenie: Curățați numai cu o cârpă uscată.
Service: Nu încercați să reparați singur această unitate. Apelați la personal calificat pentru toate lucrările de service.

3. Produs terminatview

Hotone Nano Legacy British Invasion Amplifier Cap

Imagine: The Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Head, showcasing its compact size and overall design.

Controale panoului frontal:

Hotone Nano Legacy British Invasion Front Panel Diagram

Imagine: Front panel of the Hotone Nano Legacy British Invasion amplifier head, showing input jack, EQ knobs (Bass, Middle, Treble), Gain, Volume, and Power switch. Each control is numbered and labeled for easy identification.

INTRARE: 1/4" mono jack for connecting your guitar.
BAS: Controls the low frequency response of your tone.
MIJLOC: Controls the mid frequency response of your tone.
TRIPLA: Controls the high frequency response of your tone.
CÂŞTIG: Controls the pre-amp gain level, affecting distortion and sustain.
VOLUM: Controlează volumul general de ieșire al ampmai în viață.
Comutator PORNIT / OPRIT: Pornește sau oprește unitatea.

Conexiuni la panoul din spate:

Hotone Nano Legacy British Invasion Rear Panel Diagram

Imagine: Rear panel of the Hotone Nano Legacy British Invasion amplifier head, showing power input, Phones/Line Output, AUX In, FX Loop Send/Return, and Speaker Output. Each connection point is numbered and labeled.

18V DC: Power input for the included 18V DC adapter (center negative).
IEȘIRE TELEFONURI/LINE: 1/8" stereo jack for headphones or direct recording.
AUX IN: 1/8" stereo jack for connecting an external audio player (e.g., smartphone, MP3 player) to play along with.
RETURNARE FX LOOP: 1/4" mono jack to connect the output of your effects pedal to the amplifier's power section.
IEȘIRE DIBUZOARE: 1/4" mono jack for connecting to a speaker cabinet (4-16Ω impedance).
FX LOOP SEND: 1/4" mono jack to send the pre-amp signal to your effects pedal's input.

4. Configurare și conexiuni

Conexiune de alimentare: Connect the supplied 18V DC power adapter to the "18V DC" input on the rear panel. Plug the adapter into a suitable power outlet.
Conexiune chitară: Plug your guitar into the "INPUT" jack on the front panel using a standard 1/4" instrument cable.
Conexiune difuzor: Connect the "SPEAKER OUTPUT" on the rear panel to your speaker cabinet using a speaker cable. Ensure your speaker cabinet has an impedance between 4 and 16 ohms. Avertizare: Nu operați amplifier without a speaker connected to the SPEAKER OUTPUT, as this can damage the unit.
Headphones/Line Out (Optional): For silent practice or direct recording, connect headphones or a recording interface to the "PHONES/LINE OUTPUT" jack. This will mute the speaker output.
AUX Input (Optional): To play along with backing tracks, connect your external audio device (e.g., smartphone, MP3 player) to the "AUX IN" jack using a 1/8" stereo cable.
FX Loop (Optional): To integrate external effects pedals, connect the "FX LOOP SEND" to the input of your effects pedal and the output of your effects pedal to the "FX LOOP RETURN".

5. Instrucțiuni de utilizare

Pornire: Ensure all connections are secure, then flip the "ON/OFF" switch to the ON position. The power indicator light will illuminate.
Setări inițiale: Start with the "VOLUME" and "GAIN" knobs set to their minimum positions (fully counter-clockwise). Set the "BASS", "MIDDLE", and "TREBLE" knobs to the 12 o'clock position (neutral).
Ajustarea câștigului: Slowly increase the "GAIN" knob to achieve your desired level of overdrive or distortion. Higher gain settings will produce more saturated tones.
Reglarea volumului: Once your gain is set, slowly increase the "VOLUME" knob to reach your desired listening level.
Tone Shaping with EQ:
- BAS: Adjust for low-end warmth and fullness.
- MIJLOC: Adjust for presence and cut in the mix. Lowering mids can create a "scooped" sound, while boosting them can make your guitar stand out.
- TRIPLA: Adjust for brightness and clarity.
Oprire: Before disconnecting any cables or the power supply, turn the "VOLUME" knob down and then flip the "ON/OFF" switch to the OFF position.

6. Întreținere

curatenie: Utilizați o cârpă moale și uscată pentru a curăța exteriorul amplifier. Do not use liquid cleaners, aerosols, or solvents.
Depozitare: Depozitați ampA se păstra într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.
Transport: La transport, asigurați-vă că ampLifizer-ul este ambalat în siguranță pentru a preveni deteriorarea fizică.
Îngrijirea cablului: Regularly check all cables for signs of wear or damage. Replace faulty cables immediately.

7. Depanare

Problemă	Cauza posibila	Soluţie
Fără ieșire de sunet	Alimentarea nu este conectată sau nu este pornită. Guitar cable faulty or not fully inserted. Speaker cable faulty or not fully inserted. Necorelarea impedanței difuzorului. Volume/Gain knobs set to minimum. Headphones connected to PHONES/LINE OUT.	Check power connection and ON/OFF switch. Ensure guitar cable is secure and functional. Ensure speaker cable is secure and functional. Verify speaker impedance is 4-16Ω. Increase Volume and Gain. Disconnect headphones if using speaker output.
Zgomot sau bâzâit excesiv	Faulty power supply or ground loop. Setări de câștig ridicat. Interferențe de la alte dispozitive electronice. Single-coil pickups (inherently more susceptible to hum).	Try a different power outlet or a high-quality isolated power supply. Reduce gain settings. Mişcare ampde alte electronice. Consider using humbucker pickups or a noise gate pedal.
Sunet distorsionat sau slab	Cabluri defecte. Incorrect speaker connection. Difuzor defect. Semnalul de intrare este prea ridicat.	Verificați și înlocuiți cablurile dacă este necesar. Ensure speaker cable is correctly connected and speaker impedance is correct. Test with a different speaker if possible. Reduce output from guitar or preceding pedals.

8. Specificații

Model:	TANLA1
Putere de ieșiretage:	5 wați
Sursa de alimentare:	Electric cu fir (18V CC, negativ central)
Dispozitive compatibile:	Chitară
Tip conector:	1/4" Jack (Input, Speaker Out, FX Loop), 3.5mm Jack (Phones/Line Out, AUX In)
Greutatea articolului:	15.5 uncii (aproximativ 440 grame)
Dimensiuni produs:	2.34 x 5.03 x 2.95 inci (aprox. 5.9 x 12.8 x 7.5 cm)
Tip material:	Oţel inoxidabil
Culoare:	Negru

9. Informații despre garanție

Hotone products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms for your Hotone Nano Legacy British Invasion amplifier head, please refer to the warranty card included with your purchase or visit the official Hotone webPăstrați dovada achiziției pentru reclamațiile în garanție.

10. Asistență pentru clienți

If you encounter any issues not covered in this manual or require further assistance, please contact Hotone customer support. You can usually find contact information, including email and phone numbers, on the official Hotone website-ul.

Visit Hotone Audio Support Page (Examplinkul, linkul real poate varia)

HOTONE TANLA1