HOTONE TANLA2

Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Manual de instrucțiuni pentru șef

1. Introducere

Mulțumesc pentru achizițieasing the Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Head. This ultra-compact amplifier head is designed to deliver premium guitar tones, inspired by the legendary Marshall Plexi Super Lead 1959, in a portable format. This manual provides essential information for safe and effective use of your ampmai în viață.

2. Informații de siguranță

  • Sursa de alimentare: Folosiți doar adaptorul de alimentare specificat (18V CC, negativ central).
  • Ventilare: Asigurați o ventilație adecvată pentru a preveni supraîncălzirea. Nu blocați orificiile de ventilație.
  • Umiditate: Nu expuneți unitatea la ploaie, umezeală sau umiditate excesivă.
  • Manipulare: Manevrați cu grijă. Evitați scăparea sau supunerea unității la impacturi puternice.
  • Service: Nu încercați să reparați singur această unitate. Apelați la personal calificat pentru toate lucrările de service.
  • Conexiune difuzor: Conectați întotdeauna amplifier to a speaker cabinet with the correct impedance (4-16Ω) before powering on to prevent damage.

3. Produs terminatview

The Hotone Nano Legacy Purple Wind is a compact 5-watt guitar amplifier head featuring a 3-band EQ and an FX loop. Its design is inspired by classic British rock tones.

Controale panoului frontal

Hotone Nano Legacy Purple Wind front panel controls diagram
Figura 1: Comenzile panoului frontal. This image displays the front panel of the Hotone Nano Legacy Purple Wind amplifier head, highlighting the input jack, Bass, Middle, Treble, Gain, and Volume knobs, and the On/Off switch.
  1. INTRARE: 1/4" mono jack to plug in your guitar.
  2. BAS: Controls the low frequency response.
  3. MIJLOC: Controls the mid frequency response.
  4. TRIPLA: Controls the high frequency response.
  5. CÂŞTIG: Controls the gain level.
  6. VOLUM: Controlează volumul de ieșire.
  7. Comutator PORNIT / OPRIT: Pornește sau oprește unitatea.

Conexiuni la panoul din spate

Hotone Nano Legacy Purple Wind rear panel connections diagram
Figura 2: Conexiuni panou spate. This image shows the rear panel of the Hotone Nano Legacy Purple Wind amplifier head, detailing the 18V DC input, Phones/Line Output, AUX IN, FX Loop Send/Return, and Speaker Output.
  1. 18V DC: Plug in DC 18V adapter (center negative).
  2. IEȘIRE TELEFONURI/LINE: 1/8" stereo jack, for using headphones or recording.
  3. AUX IN: 1/8" stereo jack, for connecting an external music player.
  4. RETURNARE FX LOOP: 1/4" mono jack, connect to your effects output jack.
  5. IEȘIRE DIBUZOARE: 1/4" mono jack, connect to your cabinet (speaker 4-16Ω).
  6. FX LOOP SEND: 1/4" mono jack, connect to your effects input jack (The Effects Loop is a patch point between the pre-amp si putere amp).

4. Configurare

  1. Connect Speaker Cabinet: Before powering on, connect a speaker cabinet (4-16Ω impedance) to the SPEAKER OUTPUT jack on the rear panel using a 1/4" mono speaker cable. Failure to connect a speaker cabinet before powering on can damage the ampmai în viață.
  2. Conectare alimentare: Plug the included 18V DC power adapter into the 18V DC input on the rear panel, then plug the adapter into a suitable power outlet.
  3. Conectați chitara: Plug your guitar into the INPUT jack on the front panel using a 1/4" mono instrument cable.
  4. Setări inițiale: Turn the VOLUME and GAIN knobs to their minimum (counter-clockwise) positions before powering on.
  5. Pornire: Flip the ON/OFF switch to the 'ON' position. The indicator light will illuminate.

5. Instrucțiuni de utilizare

  • Adjusting Tone: Use the BASS, MIDDLE, and TREBLE knobs to shape your desired tonal characteristics. Experiment with different settings to find your preferred sound.
  • Ajustarea câștigului: The GAIN knob controls the amount of overdrive and distortion. Turn clockwise for more aggressive tones.
  • Reglarea volumului: The VOLUME knob controls the overall output level of the amplifier. Adjust to your desired listening level.
  • Using the FX Loop: Connect external effects pedals between the FX LOOP SEND and FX LOOP RETURN jacks to integrate them into your signal chain after the preamp secțiune.
  • Headphone/Line Out: For silent practice or direct recording, connect headphones or a line-level device to the PHONES/LINE OUTPUT. This output includes speaker cabinet simulation.
  • AUX IN: Connect an external audio source (e.g., MP3 player, smartphone) to the AUX IN jack to play along with backing tracks.

6. Întreținere

  • curatenie: Utilizați o cârpă moale și uscată pentru a curăța ampexteriorul aparatului. Nu utilizați agenți de curățare lichizi sau solvenți.
  • Depozitare: Depozitați amplifier in a dry, cool place away from direct sunlight and extreme temperatures.
  • Îngrijirea tubului: As a hybrid amplifier, preamp tube may eventually need replacement. If you notice a significant change in tone or performance, consult a qualified technician.

7. Depanare

ProblemăCauza posibilaSoluţie
Nici un sunetPower not connected, speaker not connected, volume/gain too low, faulty cable.Check power connection, ensure speaker is connected, increase volume/gain, test with different cables.
Sunet slab sau distorsionatFaulty cable, incorrect impedance, worn preamp tub.Test cables, ensure correct speaker impedance, consult technician for tube replacement.
Excessive hum/noiseBucla de masă, sursă de alimentare defectă, interferențe de la alte componente electronice.Try different power outlets, use a power conditioner, move away from other electronic devices.

8. Specificații

  • Putere de ieșiretage: 5 wați
  • Sursa de alimentare: Electric cu fir (18V CC, negativ central)
  • Greutatea articolului: 15.5 uncii
  • Dimensiuni produs: 2.34 x 5.03 x 2.95 inci
  • Dispozitive compatibile: Chitară
  • Tip conector: 6.35mm Jack (Input, Speaker Output, FX Loop Send/Return), 3.5mm Jack (Phones/Line Out, AUX IN)
  • Impedanta difuzorului: 4-16 ohmi
  • Număr de model: TANLA2

9. Videoclipuri cu produse

OriPure 5W Tube Guitar Amplifier Cap

Descrierea videoclipului: This video showcases the OriPure 5W Tube Guitar Amplifier Head, demonstrating its features and sound. It highlights the tube components and various controls, providing an overview of its performance capabilities.

The Joyo Jackman II Is Like A Tiny Marshall JCM 800.

Descrierea videoclipului: Acest videoclip oferă o descriere detaliatăview and demonstration of the Joyo Jackman II amplifier head, comparing its sound characteristics to a Marshall JCM 800. It covers clean and dirty tones, control adjustments, and overall performance.

OriPure 15W Tube Guitar Amplifier Head OA-H15

Descrierea videoclipului: This video demonstrates the OriPure 15W Tube Guitar Amplifier Head (Model OA-H15), showcasing its sound quality and features. It includes various guitar riffs and tone adjustments to illustrate its versatility.

JOYO Meteor II BanTamp Seria XL Mini Amp Head 20 Watt

Descrierea videoclipului: This video presents the JOYO Meteor II BanTamp Seria XL Mini Amp Head, a 20-watt hybrid tube amplifier. It demonstrates the amplifier's clean and overdrive channels, tone controls, and built-in Bluetooth functionality for playing backing tracks.

Valeton Guitar Amplifier Head TAR-20G Amp Pedal Platform Studio Desktop with CAB SIM

Descrierea videoclipului: This video showcases the Valeton Guitar Amplifier Head TAR-20G, highlighting its features as an amp pedal platform and desktop studio amplifier with built-in cab simulation. It demonstrates various tones and connectivity options.

JOYO 20W Amplifier Head BanTamP Series ATOMIC

Descrierea videoclipului: This video features the JOYO 20W Amplifier Head from the BanTamP Series, specifically the ATOMIC model. It demonstrates the amplifier's sound characteristics and features, designed for AC lovers.

10. Garanție și asistență

For warranty information and technical support, please refer to the official Hotone website-ul web sau contactați distribuitorul autorizat. Păstrați bonul fiscal ca dovadă a achiziției.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.