Pick-up stereo complet automat Audio-Technica AT-LP60 cu acționare prin curea

Introducere

The Audio-Technica AT-LP60 is a fully automatic belt-drive stereo turntable designed for playing 33-1/3 and 45 RPM records. It features a built-in switchable phono pre-amplifier, allowing direct connection to various audio systems and powered speakers. The turntable is equipped with an integral Audio-Technica Dual Magnet phono cartridge with a replaceable stylus.

Caracteristici cheie:

• Fully automatic operation for 33-1/3 and 45 RPM records.
• Built-in switchable phono pre-amplifier with RCA output cables.
• Integral Audio-Technica Dual Magnet phono cartridge with replaceable diamond stylus.
• Anti-resonance die-cast aluminum platter to minimize vibration.
• Damped lift/cueing mechanism with front-panel control.
• Removable dust cover for protection.

Conținutul pachetului

• AT-LP60 Turntable Unit
• Capac de praf
• Platou cu curea de transmisie
• Slip Mat
• Adaptor 45 RPM
• Cablu audio RCA
• Adaptor de alimentare

Instrucțiuni de configurare

1. Despachetarea: Scoateți cu grijă toate componentele din ambalaj. Păstrați ambalajul pentru transport sau depozitare ulterioară.
2. Instalare platou: Place the platter onto the turntable spindle. Ensure it sits correctly.
3. Instalarea curelei: Locate the drive belt around the inner rim of the platter and stretch it over the motor pulley. Ensure the belt is flat and not twisted.
4. Slip Mat Placement: Place the felt slip mat on top of the platter.
5. Accesoriu capac anti-praf: Attach the hinged dust cover to the back of the turntable.
6. Conexiune audio: Connect the RCA audio cables from the turntable to your audio system (receiver, amplifier, or powered speakers). If your audio system has a dedicated "PHONO" input, connect directly to it. If not, ensure the turntable's built-in pre-amplifier is switched ON (located on the rear panel) and connect to a standard "LINE" input.
7. Conexiune de alimentare: Connect the power adapter to the turntable and then to a wall outlet.

Image: Audio-Technica AT-LP60BK Turntable with dust cover open, showing a record on the platter. This image illustrates the turntable ready for use, with the dust cover raised and a record placed on the platter.

Instrucțiuni de operare

1. Pornire: Ensure the turntable is connected to power and your audio system is on.
2. Înregistrare loc: Carefully place a vinyl record on the platter, centering it on the spindle. For 7-inch records, use the included 45 RPM adapter if needed.
3. Selectați dimensiunea înregistrării: Use the "SIZE" selector switch (usually 12" or 7") to match the size of your record.
4. Selectați viteza: Use the "SPEED" selector switch (33 or 45 RPM) to match the playback speed of your record.
5. Pornire redare (automată): Apăsați tasta ÎNCEPUT button. The tonearm will automatically move to the beginning of the record and lower the stylus.
6. Oprire redare (automată): Apăsați tasta STOP Brațul se va ridica automat, va reveni în poziția de repaus, iar platanul se va opri din rotit.
7. Manual Cueing: To manually place the stylus, use the RIDICAREA TONEARM lever to raise the tonearm. Position the tonearm over the desired track, then lower the lever to gently drop the stylus onto the record.

Întreţinere

• Capac de praf: Clean the dust cover gently with a soft, dry cloth. Avoid abrasive cleaners.
• Îngrijirea stylusului: Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing from back to front. Replace the stylus when sound quality degrades or after approximately 300-500 hours of use.
• Corpul platanului: Wipe the turntable body with a soft, dry cloth. Do not use harsh chemicals or solvents.
• Înlocuirea curelei: The drive belt may need replacement after extended use. Refer to the full manual for specific instructions on belt replacement.

Depanare

• Fără putere: Ensure the power adapter is securely connected to both the turntable and a working electrical outlet.
• Fără sunet sau sunet scăzut:
  • Check all audio cable connections between the turntable and your audio system.
  • Verify the PHONO/LINE switch on the turntable's rear panel is set correctly for your audio system's input.
  • Ensure your audio system's input selector is set to the correct input.
  • Check the volume level on your audio system.
• Sunet sărit sau distorsionat:
  • Clean the record thoroughly.
  • Check the stylus for dirt or damage; clean or replace if necessary.
  • Ensure the turntable is placed on a stable, level surface.
• Platoul nu se învârte:
  • Check if the drive belt is properly seated around the platter and motor pulley.
  • Ensure the power is connected and the turntable is switched on.

Specificații

Garanție și suport

The Audio-Technica AT-LP60 turntable comes with a 1 ani garanție de la data achiziției. Vă rugăm să păstrați dovada achiziției pentru reclamațiile în garanție.

For technical support, troubleshooting assistance, or warranty service, please contact Audio-Technica customer support through their official website-ul sau informațiile de contact furnizate pe ambalajul produsului.

You can also visit the official Audio-Technica website for FAQs, additional resources, and product registration.