Behringer DJX400

Introducere

This instruction manual provides comprehensive guidance for the Behringer DJX400 2-channel DJ Mixer. It covers essential information regarding product setup, operational procedures, maintenance, and troubleshooting. Familiarize yourself with this manual to ensure optimal performance and longevity of your DJX400 mixer.

Faţă view of the Behringer DJX400 DJ Mixer, showing its two channels, faders, EQ controls, crossfader, and master section.

Înființat

Follow these steps to properly set up your DJX400 mixer.

1. Despachetarea și inspecția

• Scoateți cu grijă mixerul din ambalaj.
• Verificați unitatea pentru a depista orice semne de deteriorare care ar fi putut apărea în timpul transportului. Dacă constatați daune, contactați imediat distribuitorul.
• Ensure all accessories, including the power cable, are present.

2. Conectarea surselor audio

The DJX400 features two dual-input stereo channels. Each channel can accept either PHONO (turntable) or LINE (CD player, media player) level signals.

• PHONO Inputs (RCA): Connect turntables to the PHONO inputs. Ensure your turntables have a ground wire connected to the mixer's ground terminal (if available) to reduce hum.
• LINE Inputs (RCA): Connect CD players, media players, or other line-level audio devices to the LINE inputs.
• MIC Input (1/4" TRS): Connect a microphone to the 1/4" TRS input on the front panel.

3. Conectarea ieșirilor audio

• MASTER Output (RCA): Connect this output to your main PA system or amplifier. This is your primary audio output.
• BOOTH Output (RCA): Connect this output to a monitor speaker system in your DJ booth. This allows you to hear your mix independently of the main output.
• Ieșire REC (RCA): Connect this output to a recording device (e.g., a digital recorder, computer audio interface) to capture your mix.
• HEADPHONE Output (1/4" TRS): Connect your headphones to this jack for monitoring.

4. Conexiune la alimentare

• Asigurați-vă că întrerupătorul de alimentare al mixerului este în poziția OPRIT.
• Connect the provided power cable to the mixer's power inlet and then to a suitable AC power outlet.
• Power on your audio sources and amplifiers before turning on the mixer.
• Finally, switch the DJX400 power ON.

Funcționează

This section details the functions of the DJX400's controls and how to operate the mixer.

1. Comenzile canalului

Each of the two stereo channels features the following controls:

• INPUT SELECT Switch: Toggles between PHONO and LINE inputs for the respective channel.
• Obține controlul: Adjusts the input sensitivity for the channel. Set this so the channel's peak LED occasionally flashes, but does not stay lit.
• 3-Band KILL EQ: Provides -32 dB attenuation for HIGH, MID, and LOW frequencies. Use these to sculpt the sound of each track.
• FADER CANAL: Controls the volume level of the individual channel.
• Buton PFL (Ascultare Pre-Fader): Routes the channel's audio to the headphone output for monitoring before it reaches the main mix.

2. Crossfader

The DJX400 features a super-smooth dual-rail "Ultraglide" crossfader designed for up to 500,000 life cycles.

• CROSSFADER: Blends between Channel 1 and Channel 2. Moving it to the left emphasizes Channel 1, and to the right emphasizes Channel 2.
• CROSSFADER CURVE Control: Adjusts the response curve of the crossfader. A sharp curve is ideal for scratching, while a smooth curve is better for blending.

3. Secțiunea principală

• NIVEL MASTER: Controls the overall output volume of the mixer to the main PA system.
• BOOTH LEVEL: Adjusts the volume of the BOOTH output for your monitor speakers.
• NIVEL MIC: Controlează volumul intrării microfonului.
• XPQ 3D SURROUND: Activates and adjusts the XPQ 3D surround effect, which widens the stereo image and adds transparency to the sound. Turn the knob to increase the effect.

4. Headphone Section

• NIVEL CĂȘTI: Reglează volumul ieșirii pentru căști.
• PFL/MAIN MIX Control: Blends between the PFL (pre-fader listen) signal and the main mix in your headphones.
• SPLIT/STEREO Switch: In SPLIT mode, the PFL signal is sent to one ear and the main mix to the other. In STEREO mode, both signals are mixed in stereo.

5. BPM Counter

The intelligent dual auto-BPM counter displays the beats per minute for both channels, aiding in beatmatching.

• The display shows the BPM for the active channel or the channel selected for PFL.
• Use the BPM display to visually match the tempo of two tracks before crossfading.

Întreţinere

Proper maintenance ensures the longevity and reliable operation of your DJX400 mixer.

Curatenie

• Always disconnect the mixer from power before cleaning.
• Use a soft, dry, lint-free cloth to wipe down the exterior surfaces.
• Pentru murdăria persistentă, o ușoară damp Se poate folosi o lavetă cu săpun blând, urmată de o lavetă uscată.
• Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and internal components.
• Keep faders and knobs free from dust and debris. Compressed air can be used carefully to clear dust from crevices.

Depozitare

• Când nu este utilizat, depozitați mixerul într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.
• Protect the mixer from dust by covering it with a dust cover.

Depanare

This section addresses common issues you might encounter with your DJX400 mixer.

Specificații

Key technical specifications for the Behringer DJX400 DJ Mixer:

Garanție și suport

Produsele Behringer sunt concepute pentru fiabilitate și performanță. Pentru informații detaliate despre garanție și asistență tehnică, vă rugăm să consultați pagina oficială Behringer. website-ul web sau contactați distribuitorul local autorizat. Păstrați bonul fiscal ca dovadă a achiziției pentru orice reclamații în garanție.

• Suport online: Visit the official Behringer website pentru întrebări frecvente, descărcări de software și resurse de asistență.
• Centre de service: Localizați centre de service autorizate pentru reparații și întreținere.