“
Product Information
Specifications:
- Function: HJSR32 Ble Function Declaration
- Key Label: Various functions including TV position, SNORE
position, ZG position, underbed light control, M1 position, M2
position, and mode switching
Product Usage Instructions:
TV Position:
To move to the TV position:
- Short press the corresponding key
- Multiplexing function: Long press FLAT+TV button for 5
seconds - Note: Long press FLAT+ head rise for 5 seconds to restore to
initial fixed position
SNORE Position:
To move to the SNORE position:
- Short press the corresponding key
- Reuse function: Long press FLAT+SNORE button for 5 seconds
- Note: Long press FLAT+ head rise for 5 seconds to restore to
initial fixed position
ZG Position:
To move to the ZG position:
- Short press the corresponding key
- Reuse function: Long press FLAT+ZG button for 5 seconds
- Note: Long press FLAT+ head rise for 5 seconds to restore to
initial fixed position
Underbed Light Control:
To turn on/off underbed light:
- Long press the button for different functions like head motor
rise, head motor drop, all motor rise, all motor drop, foot motor
rise, and foot motor drop
M1 and M2 Positions:
To set M1 or M2 positions:
- Short press the corresponding key for M1 or M2 position
- Reuse function: Long press the M1 or M2 button for 5
seconds
Mode Switching:
To switch modes between CONSTANT-PULSE-WAVE:
- If the massager is working, click the key to stop all
massagers; if inactive, press to set working time and switch
modes
Frequently Asked Questions (FAQ):
Q: How do I reset all motors to the initial position?
A: Perform a one-key reset by pressing a specific key to return
all motors to the position of 0 stroke.
Q: What happens if there is a power failure?
A: The positions set using the reuse functions are not cleared
after a power failure.
“`
HJSR32 Ble Function Declaration
1
Key label
Function
Short press to release one key run to TV position (with initial value)
Multiplexing function: Long press FLAT+TV button for 5 seconds, backlight
flashes, control box buzzer rings three times, the current head motor
and foot motor position to the new TV position (power off will not be 1
cleared)
Note: Long press FLAT+ head rise for 5 seconds, the backlight flashes,
and the control box buzzer rings three times to restore to the initial
fixed position
Short press to release one key Run to SNORE position (with initial
value)
Reuse function: Long press FLAT+SNORE button for 5 seconds, backlight
flashes, control box buzzer rings three times, the current head motor
2
and foot motor position to the new SNORE position (power off will not
clear)
Note: Long press FLAT+ head rise for 5 seconds, the backlight flashes,
and the control box buzzer rings three times to restore to the initial
fixed position
Short press release one key Run to ZG position (with initial value)
Reuse function: Long press FLAT+ZG button for 5 seconds, the backlight
flashes, the buzzer of the control box rings three times, and the
current position of the motor of the head and the motor of the foot is
3
changed to the new ZG position (not cleared after power failure).
Note: Long press FLAT+ head rise for 5 seconds, the backlight flashes,
and the control box buzzer rings three times to restore to the initial
fixed position
4
Turn on/off underbed light (default: 5 minutes)
Long press the button, the head motor rises, release the button to stop 5
the movement
Long press the button, the head motor drops, release the button to stop 6
the movement
Long press the button, all the motor rises, release the button to stop 7
the movement
Long press the button, all the motor drops, release the button to stop 8
the movement
Long press the button, the foot motor rises, release the button to stop 9
the movement
2
Long press the button, the motor of the foot drops, release the button 10
to stop the movement
Short press release one key Run to M1 position (no initial value)
Reuse function: Long press the M1 button for 5 seconds, the backlight
11
flashes, the buzzer of the control box rings, and all the motor
positions are remembered as the new M1 positions (not cleared after
power failure).
One-key reset, all the motor return to the position of 0 stroke, power 12
on reset.
Short press to release one key Run to M2 position (no initial value)
Reuse function: Long press the M2 button for 5 seconds, the backlight
13
flashes, the buzzer of the control box rings, and all the motor
positions are remembered as the new M2 positions (not cleared after
power failure).
14
Mode switching –CONSTANT-PULSE-WAVE
If the massager is in working state, click this key, all massagers stop working; If the massager is in the inactive state, press this key to 15 timing the working time of the massager, 10mins/20mins/30mins, corresponding indicator 1/2/3 on the top will be switched on successively.
The head massager starts to work in constant mode, tap to switch the
16
function cycle of “1 /2 /3 / off” successively, and automatically turn
off after 30 minutes of work;
The foot massager starts to work in constant mode, tap to switch the
17
function cycle of “1 /2 /3 / off” successively, and automatically turn
off after 30 minutes of work;
18
Press the flashlight to turn on, release the flashlight to turn off.
Coding method: [Remote control head up + head down + control box to code key] Control box buzzer sounds, indicating successful code * The control box has a reset function for the code key (click to release the reset) * Control box synchronization line function, complete synchronization, synchronization * The control box is powered on and reset. During the reset process, press any key to interrupt the motor in motion * If an unexpected power failure occurs during operation, please wait until the automatic reset is complete or press FLAT to reset before using!!!
Remote control mutual learning function (A: learn remote control, B: learn remote control) : 1. B learns A: press B’s head drop + foot drop for 5S, and the flashlight is on. Press A’s head rise + head drop within 10S, and B’s flashlight blinks, indicating successful learning.
3
2, learning function release: long press B’s head rise + foot drop 5S, flashlight light, indicating successful release 3. When the remote control that has been successfully learned is powered on again, the flashlight flashes, indicating that the remote control has been successfully learned. At this time, the remote control can no longer pair the code, and the learning function needs to be lifted to pair the code
Long press the remote control head up + head down without releasing, while installing the battery replacement remote control code value
Note:
To protect the reliability and safety of the motor and control box, do not switch keys frequently.
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
4
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.
5
Documents / Resources
 | Richmat HJSR32 Ble Remote Control Button Silicone Diagram [pdf] User Manual HJ8258, 2AJJGHJ8258, HJSR32 Ble Remote Control Button Silicone Diagram, HJSR32, Ble Remote Control Button Silicone Diagram, Control Button Silicone Diagram, Silicone Diagram, Diagram |