reolink-logoo

reolink Lumus WiFi Security Camera Outdoor with Spotlight 1080P IP Camera

reolink-Lumus-WiFi-Security-Camera-Outdoor-with-Spotlight-1080P-IP-Camera-product

What’s in the Boxreolink-Lumus-WiFi-Security-Camera-Outdoor-with-Spotlight-1080P-IP-Camera-1

Camera Introductionreolink-Lumus-WiFi-Security-Camera-Outdoor-with-Spotlight-1080P-IP-Camera-2

Set up the Camera

Download and Launch the Reolink App or Client software, and follow the onscreen instructions to finish initial setup.

Installation Guide

  • Install the camera 2-3 meters (7-10 ft) above the ground. This height maximizes the detection range of the PIR motion sensor.
  • For better motion detection performance, please install the camera angularly.
    NOTE: If a moving object approaches the PIR sensor vertically, the camera may fail to detect motion. reolink-Lumus-WiFi-Security-Camera-Outdoor-with-Spotlight-1080P-IP-Camera-4

Mount the Camera 

  • Rotate to separate parts from the bracket.
  • Drill holes in accordance with the mounting hole template and screw the base of the bracket onto the wall. Next, attach the other part of the bracket onto the base. reolink-Lumus-WiFi-Security-Camera-Outdoor-with-Spotlight-1080P-IP-Camera-5
  • Fasten the camera to the bracket by turning the screw identified in the following chart anticlockwise. reolink-Lumus-WiFi-Security-Camera-Outdoor-with-Spotlight-1080P-IP-Camera-6
  • Adjust the camera angle to get the best field of view.
  • Secure the camera by turning the part on the bracket identified in the chart clockwise. reolink-Lumus-WiFi-Security-Camera-Outdoor-with-Spotlight-1080P-IP-Camera-7
    NOTE: To adjust the camera angle, please loosen the bracket by turning the upper part anticlockwise.

Important Notes on Reducing False Alarms

  • Do not face the camera towards any objects with bright lights, including sunshine, bright lamp lights, etc.
  • Do not place camera near any outlets, including the air conditioner vents, humidifier outlets, the heat transfer vents of projectors, etc.
  • Do not install the camera at places with strong winds.
  • Do not face the camera towards a mirror.
  • Keep the camera at least 1 meter away from any wireless devices, including WiFi routers and phones to avoid wireless interference.

Troubleshooting

IP Cameras Is Not Powering on
If your camera is not powering on, please try the following solutions:

  • Plug the camera into another power outlet.
  • Use another 5V power adapter to power up the camera.
    If these won’t work, please contact Reolink Support https://support.reolink.com
    Failed to Scan QR Code on the Phone
    If the camera failed to scan the QR code on your phone, please try the following solutions:
  • Remove the protective film from the camera lens.
  • Wipe the camera lens with a dry paper/towel/tissue.
  • Vary the distance (about 30cm) between your camera and the mobile phone which
    enables the camera to focus better.
  • Try to scan the QR code under sufficient lighting.

If these won’t work, please contact Reolink Support https://support.reolink.com

WiFi Connection Failed During Initial Setup Process

If the camera fails to connect to WiFi, please try the following solutions:

  • Please make sure the WiFi band is 2.4GHz, the camera does not support 5GHz.
  • Please ensure you have entered the correct WiFi password.
  • Put your camera close to your router to ensure a strong WiFi signal.
  • Change the encryption method of the WiFi network to WPA2-PSK/WPA-PSK (safer encryption) on your router interface.
  • Change your WiFi SSID or password and make sure that SSID is within 31 characters and password is within 64 characters.
  • Set your password with only characters on the keyboard.
    If these won’t work, please contact Reolink Support https://support.reolink.com

Specifications

Video & Audio
Video Resolution:
1080p HD at 15 frames/sec
Field of View: Horizontal: 100°, Vertical: 54°Night Vision: Up to 10m (33 ft)
Audio: Two-way audio

Smart Alarm
Mode: Motion Detection + PIR Detection PIR Detection Angle: 100° horizontal Audio Alert:
Customized voice-recordable alerts Other Alerts:
Instant email alerts and push notifications

General
Power: 5V/2A
WiFi Frequency: 2.4 GHz
Operating Temperature:
-10°C to 55°C (14°F to 131°F)
Weather Resistance:
IP65 certified weatherproof
Size: 99 x 91 x 60 mm
Weight: 185g (6.5 oz)

Notification of Compliance

FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • this device may not cause harmful interference, and
  • this device must accept any interference received, including interference that may cause undesired operation.
    NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
    Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
    FCC RF Exposure Warning Statements
    This equipment complies with FCC radiation
    exposure limits set forth for an uncontrolled environment. This equipment shall be installed
    and operated with minimum distance 20cm
    between the radiator & body.

Simplified EU Declaration of  Conformity
Reolink declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.

Correct Disposal of This Product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmentally safe recycling.

Limited Warranty

This product comes with a 2-year limited
warranty that is valid only if purchased from Reolink Official Store or a Reolink authorized reseller. Learn more: https://reolink.com/warranty-and-return/.

NOTE: We hope that you enjoy the new purchase. But if you are not satisfied with the product and plan to return, we strongly suggest that you reset the camera to factory default settings and take out the inserted SD card before returning.

Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and Privacy Policy at reolink.com. Keep out of the reach of children.

End-User License Agreement
By using the Product Software that is embedded on the Reolink product, you agree to the terms of this End User License Agreement (“EULA”) between you and Reolink. Learn more: https://reolink.com/eula/.

ISED Statements
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency Exposure Statement for IC
The device has been evaluated to meet general RF exposure requirements. The device can be used in mobile exposure conditions. The min separation distance is 20cm.

OPERATING FREQUENCY
(Maximum Conducted Peak Output Power) 2412-2462MHz/2422-2452MHz (17.23dBm)

Technical Support
If you need any technical help, please visit our official support site and contact our support team before returning the products, https://support.reolink.com

Documents / Resources

reolink Lumus WiFi Security Camera Outdoor with Spotlight 1080P IP Camera [pdf] User Guide
2204F, 2AYHE-2204F, 2AYHE2204F, Lumus WiFi Security Camera Outdoor with Spotlight 1080P IP Camera, WiFi Security Camera Outdoor with Spotlight 1080P IP Camera

Leave a comment

Your email address will not be published.