RENISHAW SFM-B4 Surface Finish Probe Module
SFM-B4 The surface finish probe module
Enhanced access and inspection capability for integrated surface finish measurement
The SFP2 consists of a probe and a range of SFM modules which have been designed to suit the demands of specific parts and features encountered
in a precision manufacturing environment. The probe and modules can be automatically interchanged with all other REVO® probe options, providing the flexibility to easily select the optimum tool to inspect a wide range of features.
Each SFM module is its own mini measuring device, incorporating Renishaw’s proprietary scale and read head system, to transduce the motion of the stylus tip.
Features
The B-series of modules feature a small skid which allows the stylus to be placed close to the edge of surfaces of interest. The modules can provide access into awkward to reach features.
Typical applications
Extended reach into confined areas; integrated bladed rotors (IBRs) with small blades.
Specification
- Accuracy values are dependent upon a number of system variables. These include the machine size and configuration, scan orientation, condition of stylus tip, part fixturing system and environmental noise.
All dimensions in mm
© 2019–2021 Renishaw plc. All rights reserved. RENISHAW® and the probe symbol are registered trademarks of Renishaw plc.
Renishaw product names, designations and the mark ‘apply innovation’ are trademarks of Renishaw plc or its subsidiaries.
Other brands, products or company names are trademarks of their respective owners.
Renishaw plc. Registered in England and Wales. Company no: 1106260. Registered office: New Mills, Wotton-under-Edge, Glos, GL12 8JR, UK.
WHILE CONSIDERABLE EFFORT WAS MADE TO VERIFY THE ACCURACY OF THIS DOCUMENT AT PUBLICATION, ALL WARRANTIES, CONDITIONS, REPRESENTATIONS AND LIABILITY, HOWSOEVER ARISING, ARE EXCLUDED TO THE EXTENT PERMITTED BY LAW.
Documents / Resources
 | RENISHAW SFM-B4 Surface Finish Probe Module [pdf] Installation Guide SFM-B4, Surface Finish Probe Module, SFM-B4 Surface Finish Probe Module |
