REMOTE PRO CAD4 Upgrade Kit
Product Information
Specifications
- Product Name: CAD4 Upgrade Kit
- Manufacturer: RemotePro
- Website: www.remotepro.com.au
- Compatibility: CAD4 motor
Product Usage Instructions
- TURN OFF THE POWER FROM THE POWER POINT.
- View the diagram provided and ensure it matches the back o your CAD4 motor.
- Loosen screws 1 & 2 on the back of your motor.
- Connect the black receiver cable to screw 1 and tighten it.
- Connect the blue receiver cable to screw 2 and tighten it.
- Connect the power adapter to a PowerPoint.
- Turn the power back on and verify that the receiver powers up.
- Your two new remotes are pre-programmed. Press button 1 on the remote to test it.
Programming New Remotes to the Receiver:
- Press the black learn button inside the receiver next to the] LED until the LED lights up.
- Press and hold any button on your new remote until the LED flashes 3 times.
- The remote is now coded. Test it to ensure it operates the motor.
- If you have more than one new remote, repeat steps 1-3 for each remote.
Warning
This product may contain a coin/button cell battery. Keep products and batteries away from children. Ingestion of a battery can cause severe or fatal injuries. Seek immediate medical attention if ingestion is suspected.
CAD4 Upgrade Kit Instructions www.remotepro.com.au
Installing your new receiver to your CAD4 motor
- TURN OFF THE POWER FROM THE POWER POINT
- View the diagram below and ensure that it matches with the back of your motor.
- Loosen each of the two screws 1 & 2 on the back of your motor.
- Connect the black receiver cable to screw 1 and tighten.
- Connect the blue receiver cable to screw 2 and tighten.
- Connect the power adapter to a PowerPoint.
- Turn the power back on and ensure the receiver powers up.
- Your two new remotes have been pre-programmed to the receiver. Press button 1 on your new remote to ensure it can operate the door.
Programming new remotes to the receiver
Please Note: Your original remotes will continue to work
- Press the black learn button inside the receiver located next to the LED light until the LED illuminates.
- Press and hold any button on your new remote until the LED flashes 3 times.
- The remote is now coded, please test the remote to ensure it can operate the motor.
- If you have more than one new remote, please repeat steps 1-3.
WARNING
This product may contain a coin/button cell battery. Keep product and batteries away from children. A battery can cause severe or fatal injuries in 2 hours or less if swallowed or placed inside any part of the body. Seek immediate medical attention if it is suspected that a coin/button cell battery has been swallowed or placed inside of any part of the body.
FAQ (Frequently Asked Questions)
Q: Can I use this upgrade kit with a different motor model?
A: No, this upgrade kit is specifically designed for use with the CAD4 motor only.
Documents / Resources
 | REMOTE PRO CAD4 Upgrade Kit [pdf] Instructions CAD4, CAD4 Upgrade Kit, Upgrade Kit, Kit |
