Redmi AirDots Wireless Bluetooth Headset

Redmi AirDots Wireless Bluetooth HeadsetRedmi AirDots Wireless Bluetooth Headset - Main image

Wearing headphones

  1. Gently insert the ear cap down into the ear canal. It is better that sway the head and the headphones are not shaken.
  2. Please pay attention to adjust the earphone to expose the microphone during the call.
  3. When talking, put the headset microphone toward the mouth to make the call clearer.

The earphone itself is equipped with a medium eartip. If you feel unwell, it is recommended to replace the large or small eartip.

Charging

Before using the device, please tear off the isolation film at the charging contacts of the left and right headphones to fully charge the charging box and headphones.
-Plug in the charging cable to charge both the headset and the charging box.
-The charging box is not fully charged, while the charging indicator light is steady red. When the battery is fully charged, the charging indicator is off.
-During the charging of the headset, the red light of the earphone light is long. When the earphone is fully charged, the white light of the earphone light is on for 1 minute and then goes out.

Starting Up

1. When the earphone is in the charging box, the earphone is automatically turned on from the charging box. 2. When the headset is not in the charging box and is turned off, press and hold the multi-function button for about 1 second (the white light is on).

Shut Down

1.Put it into the charging box and the headset will automatically shut down.
2.When the power is on, press and hold the multi-function button for about 5 seconds (the red light is on for 2 seconds).

Use Dual Headphones

Automatically Connect: Take two earphones out of the charging box at the same time, wait for 2-3 seconds to automatically turn on the headphone, and turn on the device Bluetooth search “RedmiAirDots_R” when the right headphone white light flashes and click to complete the connection. If the connection fails, put the headset back in the charging case. Repeat the above operation. After the first connection, the headset can be automatically connected back to the last paired device (Bluetooth function needs to be turned on). Note: The headset has been initialized at the factory and can be taken out for related operations directly.

Manual Connection: When the headset is turned off, manually open two headphones, the white light flashes quickly and waits for the left and right headphones to be connected in series. After the serial connection is successful, the right earphone white light flashes slowly, and the device Bluetooth is connected to connect.

Use Single Earphone

Automatic connection: Take out a headset from the charging idea. When the indicator light flashes from white light to slow network after auto power on, open the device Bluetooth search “RedmiArDots_R” (or “RedniArDos_L”) and click to complete the connection. After the first connection, the headset can be automatically connected back to the last paired device (Bluetooth needs to be turned on).
Note: The left earphone (L) has a relatively long automatic connection time.
Manual connection: When the headset is turned off, manually turn on one of the machines. When the headset turns white and flash slowly, turn on the Bluetooth function of the device to connect the corresponding headset.

Headset Reset

If the headset cannot be connected properly, please reset the headset as follows: Take the headset out of the charging box, and in the off state, press and hold the two earphone multi-function keys for about 15 seconds, and alternately flash three times in the second red and white light. Then release and put back the charging box, delete the connection record on the device and reconnect. (including clearing the records where the two headphones are paired in series and paired with the device)

Documents / Resources

Redmi AirDots Wireless Bluetooth Headset [pdf] User Manual
AirDots Wireless Bluetooth Headset

Join the Conversation

2 Comments

  1. Would like to ask

    Use dual headphones
    Manual connection: After turning off the headphones, manually turn on the two pairs of headphones, the white light flashes quickly, and wait for the left and right headphones to be connected in series. After the serial connection is successful, the white light of the right earphone flashes slowly, and the Bluetooth device is connected for connection.
    Headphone reset
    If you can’t connect the headset properly, please reset the headset as follows: Take the headset out of the charging box, and in the off state, press and hold the two headset multi-function keys for about 15 seconds, and flash alternately XNUMX times in the second Under the red and white lights. Then release and put back the charging case, delete the connection record on the device and reconnect

    I tried all the above methods, but the left ear still can’t connect even if the left ear is taken out alone, it still can’t connect to the mobile phone. How to solve it Thank you
    想請問一下

    使用雙耳機
    手動連接: 關閉耳機後,手動打開兩副耳機,白燈快速閃爍,並等待左右耳機串聯。 串行連接成功後,右耳機的白燈緩慢閃爍,並且已連接設備藍牙以進行連接。
    耳機重置
    如果無法正確連接耳機,請按以下步驟重設耳機:將耳機從充電盒中取出,並在關閉狀態下,按住兩個耳機多功能鍵約15秒鐘,並交替閃爍XNUMX次在第二個紅色和白色的燈光下。 然後釋放並放回充電盒,刪除設備上的連接記錄並重新連接

    上述方法都試過 左耳還是連不上 即使左耳單獨拿出來 也連不上手機 要如何解決 謝謝

  2. The right earbud comes on a solid white light. Press and hold, it will not turn off. and unable to connect to bluetooth What should I do?
    หูฟังข้างขวาขึ้นไฟสีขาวค้าง กดค้างไว้ก็ไม่ดับค่ะ และไม่สามารถเชื่อมต่อบลูทูะได้ค่ะ ต้งอทำยังไงค่ะ

Leave a comment

Your email address will not be published.