Contents
hide
HearSound Wireless Headset Digital Wireless Headset System
Product Specifications
- Product Name: HearSound Wireless Headset
- Connection Type: Wireless
- Included Cables: Optical, Coaxial, AUX
- Charging Time: 8 hours for a full charge
- Indicator Light Colors: Blue
Product Usage Instructions
Audio Setup
- For audio setup with the HearSound Wireless Headset, follow these important tips.
- Aux Audio: Remove protective plastic tips from the optical cable included.
- Optical Audio Connections: If you experience no sound, check TV settings and consult the manual for the correct setup.
Transmitter Setup
- The transmitter has front and back panels with different features.
- Front: Volume control, On/Off switch, Indicator light
- Back: Optical, Coaxial, AUX ports, Input switches
Pairing Instructions
- Charge the headset for 8 hours to ensure a full battery.
- Turn on the transmitter and headset.
- Follow the pairing instructions in the headset manual.
Important Tips for Audio Setup
You can connect your transmitter to your TV in these 3 ways
- Best – Optical Audio
Optical Audio Port - Better – Aux Audio
Line Out Audio Port - Good – Coax Audio
Coax Audio Port - PLEASE REMOVE PROTECTIVE PLASTIC TIPS FROM THE OPTICAL CABLE THAT IS INCLUDED
Optical Audio Connections
Important Note for Optical Audio Connections
- If you don’t hear sound audio from your HearSound headset and you’ve used the optical cable to connect your TV and HearSound transmitter, check the following settings in your TV’s menu system and your TV’s instruction manual.
- Set the TV’s Audio format to optical audio or PCM (not Dolby Digital or DTS)
- Set Dolby/DTS to OFF if your TV has a separate setting for this.
- NOTE: Different TV’s have different names for settings. See your TV’s owners manual for information about your specific model.
OVERVIEW
Pairing your Transmitter and Headset
Important Tips for Pairing Your Transmitter and Headset
- Once you have connected power and the audio cable of your choice, you are ready to pair your headset.
- You will see a blue light on the front of your transmitter that will indicate which connection you are using (AUX/COAXIAL/OPTICAL)
- The blue light should be blinking, indicating that it is in Pairing Mode
- Turn the volume knob to the right to turn it ON and rotate to right to increase volume.
- In a few moments, you should see that the light on the transmitter AND the headset are both SOLID BLUE.
- You should hear audio coming out of the headset.
- If you are not receiving audio through your headset and the indicator light is not solid blue, your system is not paired.
- To pair, press the hold button on the transmitter for at least 2 seconds and the indicator lights start flashing. Then you will press the tone button on the headset until you hear a BEEP and let go.
- Then the indicator light on the headset should start blinking. Once paired, both units will turn solid blue.
- You should hear audio coming out of the headset.
- IF both indicator lights are solid BLUE, your system is paired. IF THERE IS NO AUDIO, your TV likely has additional Audio settings that need to be adjusted.
- Please refer to your TV’s owner manual or you can utilize your TV’s remote to go into settings for AUDIO and activate your audio settings to Optical Out/Optical Digital/PCM.
- Once this has been adjusted, you will have audio coming out of the headset.
- PLEASE CHARGE YOUR HEADSET FOR 8 HOURS TO ENSURE IT IS FULLY CHARGED
Frequently Asked Questions
- Q: What should I do if I don’t hear any sound from the headset?
- A: If using the optical cable, check TV settings and consult the manual for troubleshooting steps.
Documents / Resources
 |
HearSound Wireless Headset Digital Wireless Headset System [pdf] Instructions Wireless Headset Digital Wireless Headset System, Digital Wireless Headset System, Wireless Headset System, Headset System |