Razer BlackWidow V3 Pro Support

Razer Huntsman V2 Analog Support

FAQ

At a Glance: Razer BlackWidow V3 Pro

The BlackWidow V3 | RZ03-03530 Pro is Razer’s first wireless mechanical gaming keyboard. It has all, with wireless HyperSpeed connectivity, media keys, and a wrist rest. The BlackWidow Pro is for those who want a feature-packed mechanical keyboard.

Device Layout

 

Technical Specifications

Keyboard TypeWireless Full-sized Mechanical Keyboard
DesignAluminum top cover
Available switch type(s)Razer™ Green Mechanical Switch with transparent switch housing

Razer™ Yellow Mechanical Switch with transparent switch housing

Switch Lifespan80 million clicks
KeycapsDoubleshot ABS keycaps
ConnectivityHyperSpeed Wireless 2.4GHz, Bluetooth, and USB-C cable
Wireless Response Rate1ms
Battery Life
  • Backlighting OFF is up to 200 hrs
  • White backlight at 50% brightness is up to about 14hrs
  • Spectrum cycling backlight at 50% brightness is up to about 25hr
  • White backlight at 100% brightness is up to about 6hrs
  • Spectrum cycling backlight at 50% brightness is up to about 13hrs
Backlighting
  • Individually backlit keys
  • Razer Chroma™ RGB lighting with true 16.8 million customizable color options
Key Roll-overN-key Rollover
Fully Programmable KeysYes
SynapseSynapse 3
Onboard memory5 profiles
1000Hz UltrapollingNo
Additional Game KeysNo
Audio Pass-ThroughNo
Dedicated Media Controls4 + Digital dial
USB Pass-ThroughNo
Wrist RestYes
Cable Type2m Detachable braided fiber cable
Approx. Dimension LxWxH (mm)450.70 mm x 248.40 mm x 42.30 mm
Approx. Weight (grams)1423

Why am I unable to connect my Razer BlackWidow V3 Pro to Windows 7 system via Bluetooth?

Windows 7 does not support Bluetooth 4.0 and higher versions. Please click here to learn more.

How long will the Razer BlackWidow V3 Pro’s battery last?

The battery can last up to 200 hrs. with backlighting turned off. With backlighting turned on, the battery life depends on the lighting effects and brightness of your backlighting. Below are examples of average battery life with backlighting:

  • White backlight at 50% brightness is up to about 14hrs
  • Spectrum cycling backlight at 50% brightness is up to about 25hrs
  • White backlight at 100% brightness is up to about 6hrs
  • Spectrum cycling backlight at 50% brightness is up to about 13hrs

Why is the lighting effect on the Razer BlackWidow V3 incomplete while on Bluetooth?

Due to inherent bandwidth limitation over Bluetooth, Razer Studio lighting effects, Audio Visualizer, and On-board memory will only be available over 2.4GHz and wired connection.

Only the following quick lighting effects are available while on Bluetooth connection:

  • Breathing
  • Static
  • Wave
  • Spectrum Cycling
  • Reactive
  • Starlight

Where can I find the 2.4GHz USB dongle?

The 2.4GHz USB dongle is stored in the dongle compartment behind the keyboard.

How do I clean my Razer Keyboard?

Before cleaning, we suggest unplugging the device from your computer. If you wish to clean under the keycaps, Razer suggests holding the unit upside down and/or using compressed air from a can. The overall finish can be cleaned with wipes generally used for cleaning your computer monitor or sunglasses. Please ensure that the surface is free of large dust particles or debris before wiping the surface with any product. Wiping debris into the surface can lead to minor scratches on the surface of the unit.

Note: Under no circumstances should you ever submerge the keyboard in any type of liquid. Submerging the keyboard in any liquid will void the warranty on your keyboard.

How To

How to add a device to a multi-device dongle

To add a device to the multi-device dongle, follow the steps below:
1. Launch Synapse 3 and go to your device’s profile. If your device is not on the latest firmware, you will be prompted for an update.
2. Update your device to the latest firmware. Visit Razer Support to check for firmware updates and make sure to download and install them on your device.
3. Click on “Open Pairing Utility”.
4. Click the “ADD” button to start scanning for a device.
5. Set the compatible device switch to Hyperspeed (2.4G) mode. Press and hold any key on the device you want to pair for it to remain discoverable. Wait while scanning is in progress.
Notes:
  • Ensure the device is not connected via USB cable
  • Remove the additional device’s USB dongle if it is connected to the system
  • Keep the device in close proximity to the Hyperspeed dongle
6. As soon as your device is found, click “PAIR”.
The additional paired device will now be visible.

Troubleshooting

When the keyboard is paired to my laptop via Bluetooth, the connection intermittently cuts in and out. How do I fix this?

Try updating your Intel drivers by visiting: https://www.intel.com/content/www/us/en/support/intel-driver-support-assistant.html

Downloads

BlackWidow V3 Pro Firmware Updater Guide – Download

Razer BlackWidow V3 Pro (Chinese Simplified) – Download

Razer BlackWidow V3 Pro (English) – Download

 

References

Join the Conversation

1 Comment

  1. I have a Razer Blackwindow V3 Pro keyboard but it comes with a USB dongle of the Razer DeathAdder V2 Pro mouse and uses HyperSpeed ​​2.4Ghz technology (not the USB dongle of the V3 Pro keyboard). So can I use this V3 Pro keyboard with Wireless connection via USB dongle of Deathadder V2 Pro mouse? Sincerely thank!

    Tôi có 01 bàn phím Razer Blackwindow V3 Pro nhưng lại đi kèm với USB dongle của chuột Razer DeathAdder V2 Pro cùng sử dụng công nghệ HyperSpeed 2.4Ghz (không phải USB dongle của bàn phím V3 Pro). Vậy tôi có thể dùng bàn phím V3 Pro này sử dụng với kết nối Wireless thông qua USB dongle của chuột Deathadder V2 Pro hay không? Xin chân thành cảm ơn!

Leave a comment

Your email address will not be published. Required fields are marked *