RANBEM USB Food Processor Instruction Manual

logo

RANBEM USB Food Processor

productImportant safety instructions

When using electrical appliances, basic safety precautions should always be followed, including the following:

  1. Read and save all instructions.
  2. DO NOT allow young children to operate the appliance or use as a toy. Close supervision is necessary when any appliance is used near children.
  3. Do not submerge motor into water or any other liquid.
  4. DO NOT operate this appliance on or near any hot surfaces (such as gas or electric burner or in a heated oven)
  5. Not recommend to use attachments or bowls made by other manufacturer.
  6. Appliance accessories are not intended to be used in the microwave as it may result in damage to the accessories.
  7. DO NOT remove the motor before the Chopping Blade assembly has stop running.
  8. DO NOT attempt to sharpen blades.
  9. DO NOT use containers if they are cracked or chipped.
  10. DO NOT overfill.
  11. DO NOT use the appliance if chopping blades are bent or damaged.
  12. Avoid contact with moving parts at all times. Keep hands, hair, clothing as well as spatulas and other utensils away from blades and containers during operation, Prevent risk of severe personal injury or damage to the appliance.
  13. A scraper may be used but must be used only when the appliance is not running.
  14. Immediately release the On/Off pulse button on the motor head in the event that the appliance malfunctions when running.
  15. NEVER operate the appliance without the baffle and bowl in place.
  16. Make sure that the cutting blades are properly assembled before operating the appliance.
  17. DO NOT operate the appliance to chop meat for more than 30 seconds, chop vegetables for more than 60 seconds
  18. DO NOT operate the appliance empty.
  19. If the appliance overheats, the thermal switch will activate and shut off the motor. To reset, let it cool down for about 30 minutes.
  20. Make sure cover is secured in place before operating the appliance.
  21. DO NOT use appliance for other than intended use.

Cleaning and Maintenance

Cleaning

image 1

CAUTION: Make sure that the motor is disconnect before inserting or removing the blade assembly and before cleaning.

DO NOT immerse the motor into water or any other liquid. Clean with a damp sponge or cloth to wipe dry.

  1. Separate/remove all parts from each other.
  2. Hand Washing: Wash the container, lid, and Chopping Blade Assembly in warm, soapy water. When washing the Chopping Blade Assembly, use a dish-washing utensil with a handle to avoid direct hand contact with blades. Handle the Chopping Blade Assembly with carefully to avoid contact with sharp edges. Rinse and air dry thoroughly.
  3. Dishwasher: The container is dishwasher safe.

Troubleshooting Guide

trouble shooting

One year Limited Warranty

Thank you for purchasing your new Ranbem USB Food Processor

  •  If you have any questions, we are here to help This warranty applies to products purchased and used in the U.S. This is the only express warranty for this product and is in lieu of any other warranty or condition.
  • Please direct all requests for action on this warranty or any other product inquiries to email address: ranbem@foxmail.com

logo

Documents / Resources

PDF thumbnailUSB Food Processor
Instruction Manual · USB Food Processor, 238B

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Hello, I have a food processor Model 238B. It works very well, congrats to you guys, but somehow I misplaced the charging USB cable. I have lots of them but non of them fit this machine somehow. Can you help me out/ Either with the type of the cable or if you have replaceable cable, I would like to ask you for one. Thank you ahead. 🙂

    George Romhany asks Hello, I have a food processor Model 238B. It works very well, congrats to you guys, but somehow I misplaced the charging USB cable. I have lots of them but non of them fit this machine somehow. Can you help me out/ Either with the type of the cable or if you have replaceable cable, I would like to ask you for one. Thank you ahead. :)
    Manuals+ clarified question
    Question

    What type of USB charging cable does the RANBEM USB Food Processor Model 238B use, and how can I get a replacement?

    Answer

    The RANBEM USB Food Processor Model 238B is designed to be charged via a standard USB interface. While the manual does not specify the exact connector type (such as Micro-USB or USB-C), it is common for these portable devices to use a specific proprietary or standard fitment provided in the box.

    Since you have tried multiple cables without success, it is recommended to contact the manufacturer directly for a replacement or specific technical details regarding the plug size. According to the manual, you can direct all inquiries regarding parts and warranty to their official email address: ranbem@foxmail.com.

  2. This food processor works just fine, I have no problem with it. But for sometime, I can’t use it because I lost or misplaced the USB cable. Can yoo provide me information, where could I have one? Thank you

    George Romhany asks This food processor works just fine, I have no problem with it. But for sometime, I can't use it because I lost or misplaced the USB cable. Can yoo provide me information, where could I have one? Thank you
    Manuals+ clarified question
    Question

    Where can I find a replacement USB cable for my RANBEM USB Food Processor?

    Answer

    The manual for the RANBEM USB Food Processor Model: 238B does not specify the type of USB cable used for charging or provide information on where to purchase replacement parts like the USB cable. However, the manual does provide an email address for warranty and product inquiries: ranbem@foxmail.com. You may be able to contact them directly to inquire about obtaining a replacement USB cable.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.