QualSights QS-WPS Waterproof Broadcasting Device
Specifications
- Product Name: QS-WPS Waterproof Broadcasting Device
- Part Number: QS-WPS
- Description: Waterproof broadcasting device with BLE 5.0, SOS button, and indoor positioning
- Features: SOS button, BLE 5.0, indoor positioning, NFC technology
- Electronic Parameters:
- Case Color: White (customizable)
- Battery: 1 x CR series, 220mAh, 3.0V
- Operation Voltage: 1.8-3.9V
- Transmission Circuit: 5.3mA (Max.)
- Transmission Range: 90 meters
- Antenna: On board / PCB Antenna, 50ohm
- Net Weight: 12g
- Size: 35.9*11mm
FAQ
Q: Can the QS-WPS device be used for personnel tracking?
A: Yes, the QS-WPS device supports personnel tracking as one of its applications.
Q: What is the transmission range of the device?
A: The QS-WPS device has a transmission range of up to 90 meters.
| Part # | Description |
| QS-WPS | QS-WPS is a waterproof broadcasting device with BLE 5.0, SOS button, and indoor positioning. Users can push the SOS button when they need help. Also, it can enable employees to check- in-& out in the office for management optimization with advanced NFC tech. |
INTRODUCTION
QS-WPS is a new-generation beacon with push-button for hospital patients, personnel positioning, and emergency call. It is equipped with Bluetooth® 5.0 hardware platform based on nRF52 chip, advertising iBeacon, Eddystone (UID, URL, TLM), and Accelerometer sensor simultaneously. The user can configure the device beacon via BeaconSET+ App as well.
QS-WPS
Waterproof Broadcasting Device
FEATURE
- Advertise i Beacon & Eddystone
- 3 – axis sensor data( Only for NRF 5 2 8 3 2 )
- Bluetooth® 5 . 0 chipset
- 1 pc CR series replaceable coin battery
- A push- button on the beacon
- IP6 7 waterproof grade, dust- proof, shock- proof
- Detachable wristband
- NFC available
APPLICATION
- Activity monitoring
- Hospital management
- Indoor location
- Personnel tracking
ACTIVATE & STOP QS-WPS
- Press the button of QS-WPS for 5s, the LED lights on 3s then off, the device is activated on;
- Press the button of QS-WPS for 5s, the LED flashes 5 times then off, the device is turned off.
CONFIGURATION TOOL
- BeaconSET+ (iOS & Android);
- The QS-WPS waterproof broadcasting device can be turned off by app BeaconSET+;
ELECTRONIC PARAMETER
| Item | Value | Remarks |
| Case Color | White | Other colors can be customized |
| Battery Model | 1 x CR series | 1pc CR series button battery, 220mAh, 3.0V |
| Operation Voltage | 1.8-3.9V | DC |
| Transmission Circuit | 5.3mA (Max.) | Tested at 0d Bm transmission power |
| Transmission Range | 90 meters | Maximum |
| Antenna | 50ohm | On board / PCB Antenna |
| Net Weight | 12g | With battery |
| Size | φ35.9*11mm | Main body |
CONFIGURABLE PARAMETERS
Each QS-WPS device has been pre-configured in the factory before the shipment. Here below is given the main parameters and default settings.
BeaconPlus Firmware V1
| Type | Item | Default Settings |
|
iBeacon | UUID (16 bytes) | E2C56DB5- DFFB-48D2- B060- D0F5A71096E0 (Proximity) |
| Major (2 bytes) | 0 | |
| Minor (2 bytes) | 0 | |
| Measured Power | -59d Bm9 (0xC5) | |
| Tx Power | 0d Bm | |
| Interval(ms) | 900ms | |
|
UID (On) | Instance ID | Random |
| Namespace ID | Random | |
| Measured Power | -24d Bm(0xE8) | |
| Tx Power | 0dBm | |
| Interval(ms) | 2000ms | |
|
URL (On) | URL | http://www.minew.com |
| Measured Power | -24d Bm(0xE8) | |
| Tx Power | 0dBm | |
| Interval(ms) | 2000ms | |
|
TLM (On) | Electricity mV | By default |
| Boot time | By default | |
| PDU packets | By default | |
| Measured power | -24d Bm(0xE8) | |
| Tx power | 0dBm | |
| Interval(ms) | 4000ms |
|
INFO (On) | Device name | QS-WPS |
| Electricity | By default | |
| MAC address | Factory setting | |
| Measured power | -24d Bm(0xE8) | |
| Tx power | -8dBm | |
| Interval(ms) | 4000ms | |
|
Extra Function | Password | minew123( configurable) |
| Connectable | Yes( it is configuration mode) | |
| Reset factory | available | |
| Update firmware | available | |
| ACC Sensor | X-axis | 1.The value is decided by the real status: stable or move; 2 . Only act on the beacon with the accelerometer sensors inside. |
| Y- axis | ||
| Z-axis |
BeaconPlus Firmware V2
| Type | Item | Default Settings |
|
iBeacon ( Trigger once) | UUID(16bytes) | FDA50693-A4E2-4FB1-AFCF-C6EB07647825 |
| Major(2bytes) | 10001 (0-65535, configurable) | |
| Minor(2bytes) | 19641 (0-65535, configurable) | |
| Measured power | -59d Bm(0xC5) | |
| Tx power | 0d Bm (-40~+4d Bm, configurable) | |
| Interval(ms) | 500ms (100ms~10s,configurable) | |
|
UID ( Trigger twice ) | Instance ID | Random |
| Namespace ID | Random | |
| Measured power | -24d Bm(0xE8) | |
| Tx power | 0d Bm (-40~+4d Bm, configurable) | |
| Interval(ms) | 2000ms (100ms~10s, configurable) | |
|
URL ( Trigger three- times) | URL | http://www.minewtech.com/ |
| Measured power | -24d Bm(0xE8) | |
| Tx power | 0d Bm (-40~+4d Bm, configurable) | |
| Interval(ms) | 2000ms (100ms~10s, configurable) |
|
TLM ( On) | Measured power | -24d Bm(0xE8) |
| Tx power | 0d Bm (-40~+4d Bm, configurable) | |
| Interval(ms) | 4000ms (100ms~10s, configurable) | |
|
INFO ( On) | Measured power | -24d Bm(0xE8) |
| Tx power | -8dBm (-40~+4d Bm, configurable) | |
| Interval(ms) | 4000ms (100ms~10s, configurable) |
COMPATIBILITY
| Supporting device& system | Module of Supporting device |
| BLE | BLE4.2 and above |
| iOS7.0 and above | i Phone4S, i Phone5/5C/5S iPhone6/6Plus/6S/6SPlus, iPhone7/7Plus iPad mini/mini2/4/Air/pro, etc. |
| Android4.3 and above | Samsung Xiaomi ,Huawei ,OnePlus, Vivo, OPPO, etc. |
PACKING INFORMATION
| Details | Inner Box( Battery included) | Outer Box( Battery included) |
| Quantity(QS-WPS) | 1pcs / box | 96pcs / carton |
| Net Weight | 12g | 1152g |
| Gross Weight | 48.5g | 5.1Kg |
| Size | 180x 100 x 12 cm | 32 x 23.5 x 40 cm |
TRIGGER OPERATION
NRF52810 Trigger Operation：
- Click the button to broadcast i Beacon frame for 60 s
- Double click the button to broadcast URL frame for 6 0 s
- Press the key three times to broadcast UID frame for 6 0 s
NRF52832 Trigger Operation：
- Single Clicking is not supported
- By default, double-click and triple click triggers are not available. If they are needed, access to BeaconSet + for setting.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction
Documents / Resources
 | QualSights QS-WPS Waterproof Broadcasting Device [pdf] Owner's Manual QS-WPS Waterproof Broadcasting Device, Waterproof Broadcasting Device, Broadcasting Device, Device |