qingping CGC1 Bluetooth Clock User Manual
Thank you for using Qingming Bluetooth Clock.
Insert or Replace Battery
Set Alarm, Clocks, Change Settings
Connect to “Qingping+”
https://qingping.co/apps/qingpingplus
Connect ta Mi Home/ Xiaomi Home
http://home.mi.com/do/index.html?model=cgllc.clock.cgc1
Stopwatch Mode or Pomodoro Timer Mode
Step an Alarm
Turn off All Alarms
Press and hold the button on the back of the product for 6 seconds to turn off all alarms, After that, you can press and hold the button for 6 seconds again to restore the previous alarm settings.
Restore Factory Settings
Press and hold the button on the back of the product for 12 seconds, the screen will display “88:88”, and the factory settings are restored.
Measuring Items and Ranges
* Please do not place this product in an environment with humidity greater than 90% for a long time.
Specifications
Model: CGC1
Weight: 53.1 g (not including battery)
Size: 90.27*93.27*40mm
Bluetooth: BLE 5.0
Battery: CR2430 button cell
FCC ID: 2AQ3F-CGC1
Attention
- Do not block the vent hole at the bottom of the product.
- This product is not waterproof or dustproof.
- Do not throw the battery or the product with a battery into a fire to avoid an explosion.
- Do not disassemble the product by yourself to avoid injury.
FAQ
Error Code
Performance Faults
Warranty
Non-warranty
Qingping Technology (Beijing) co., LUI.
Address: 1706, Floor 17, Building 7, District 4, Wangjingdongyuan, Chaoyang District, Beijing
Website: qingping.co
Email: support@qingping.com
Documents / Resources
 | qingping CGC1 Bluetooth Clock [pdf] User Manual CGC1, 2AQ3F-CGC1, 2AQ3FCGC1, CGC1 Bluetooth Clock, CGC1, Bluetooth Clock |
