What is the behavior of the indicator light when the ZEALOT-ZE21 speaker is fully charged?
Based on the ZEALOT-ZE21 Wireless Speaker User Guide, the battery status is indicated by the Battery indicator light located near the power button. The…
Manuals+ Q&A
Wireless Speaker questions & answers
Browse answered questions about Wireless Speaker, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Can I connect two microphones to the Zealot ZE51 speaker?
Based on the instruction manual for the ZEALOT ZE51, the device supports a Microphone Function. While the manual confirms microphone connectivity, it does not…
Why is there no voice prompt when I power on my Awei Y333 speaker?
According to the manual, the Awei Y333 should provide a voice prompt and a blue light indicator when you long-press the power button for…
How do I turn off the LED lights on the TG-192 speaker?
To turn off the LED lights on your T&G TG-192 Wireless Speaker, follow these steps: Locate the M button (Mode button) on the control…
How do I know when the ZEALOT MP1 battery is full?
The ZEALOT MP1 features a battery indicator light located near the power button to help you determine the current charge level. According to the…
How do I reset the speaker and pair it with a new phone?
To switch your BASS JAXX Radiant LED Wireless Speaker to a new phone when the previous device is unavailable, follow these steps: Power On:…
Is it possible to set the BS-56 speaker to start directly in optical mode by default?
Based on the BWOO BS-56 user manual, there is no mention of a feature to set a default startup mode or a memory function…
How do I set up two Magboom S1 Ultra speakers for stereo output using an AUX cable from a PC?
To get stereo output from two Magboom S1 Ultra speakers while using an AUX cable, you should utilize the TWS (True Wireless Stereo) pairing…
How do I connect wireless microphones to the ZEALOT MP1 speaker?
Based on the provided user guide for the ZEALOT MP1 Wireless Speaker, there are no specific instructions or mentions of wireless microphone connectivity. The…
How do I know when the TG-166 speaker has a low battery?
Based on the manual for the CHENGTAI TG-166, there is no specific visual low-battery indicator light described. However, most portable speakers of this type…
Can I use the integrated microphone on the CaanKee CWS03 Wearable Wireless Speaker to amplify my voice like a megaphone?
No, the CAANKEI CWS03 Wearable Wireless Speaker does not have a megaphone or voice amplification feature. The integrated microphone is designed specifically for Music/Phone…
Can you disable the voice prompts on the speaker?
Based on the provided manual for the Monster MS62120 (S210), there is no mention of a setting or button combination to disable voice prompts.…
How do I turn off the echo effect on the HY-3317 speaker?
Based on the control layout for the HONGWEI HY-3317, the echo effect is typically managed using the dedicated echo control buttons on the device…
Is there audio latency when using the 3.5mm AUX input on the ZEALOT S49?
The ZEALOT S49 features a dedicated AUX mode that can be accessed by pressing the M (Mode) button until the AUX indicator is active.…
The device appears in the Bluetooth list but will not connect.
If you can see the device in your Bluetooth list but cannot connect, please try the following steps based on the user manual: Verify…
How do I play music from an SD card on the PEICHENG WP-03C speaker?
To play music from an SD card (referred to as a TF card in the manual) on your PEICHENG WP-03C speaker, follow these steps:…
Why is the red light blinking when I charge my speaker, and why is the battery level not increasing?
According to the 1HORA BOC250 manual, the red light should remain solid while charging and turn off once fully charged. If the light is…
Why is my V60108BT-NOC speaker not charging?
To troubleshoot why your speaker is not charging, please check the following based on the manual's instructions: Check the Connection: Ensure the included Type-C…
Why is the sound not working on my PEANUTS PNTS-TBTS Portable Wireless Speaker?
If your PEANUTS PNTS-TBTS speaker is not producing sound, please try the following troubleshooting steps: Check Power and Battery: Ensure the speaker is turned…
How do I troubleshoot the EBS-618 wireless speaker if it is not responding or working?
If your EBS-618 wireless speaker is not responding, please try the following troubleshooting steps based on the manual: Reboot the Speaker: The manual states…
Why is the power button not turning on my EBS-618 wireless speaker?
If your EBS-618 wireless speaker is not turning on, please try the following troubleshooting steps based on the manual: Check the Battery: The speaker…
Can I connect my speaker with another speaker that is not the same brand?
Based on the user manual for the 1HORA BOC242, the TWS Pairing feature is designed to work between two speakers of the same model.…
Why is the top light flashing red and the speaker not charging after the first use?
Based on the ZEALOT ZE51 manual, a flashing red light typically indicates a low battery status. If the speaker does not seem to charge,…
Why is the blue light not on after the EBS-618 speaker is paired?
According to the EBS-618 User Manual, the behavior of the blue LED light changes depending on the speaker's state after pairing: Standard Pairing: After…