How do I enable motion activity alerts on my cell phone for the Feit Flood Light Security Camera?
To receive motion alerts on your cell phone, you must use the Feit Electric app. Follow these steps to ensure notifications are enabled: App…
Manuals+ Q&A
Security Camera questions & answers
Browse answered questions about Security Camera, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Newest questionsWhat is the angle of view for the FOAOOD DF220 security camera?
The provided manual for the FOAOOD DF220 does not explicitly state a numerical degree for the camera's angle of view (field of view) in…
What is the angle of view for the FOAOOD DF220 camera?
The provided user manual for the FOAOOD DF220 security camera does not explicitly state the numerical degree for the lens's angle of view (field…
How can I enable the smart human detection feature on my Jennov HD WiFi Security Camera to reduce false alarms?
To address the issue of excessive false alarms, you should ensure that the Human Shape detection is properly configured within the CloudEdge app. According…
How do I reset the ieGeek 4G LTE camera to use a new SIM card when the indicator light stays solid blue and won't blink?
To reset your ieGeek 4G LTE camera and switch to a new SIM card, please follow these steps: Perform a Hard Reset: Locate the…
Why is my XODO VD1 doorbell not entering configuration mode or scanning the QR code after a reset attempt?
Based on the XODO VD1 manual, the device must be in Blinking blue status to be in configuration mode. If the light is solid…
How can I view recorded sounds and movements?
To view recorded movements and sounds for your SURFOLA WS01 Security Camera, you must use the Osaio App. Follow these steps based on the…
How can I access a hard drive on a ZOSI ZVR08WN system if I don't have the password, and is there a factory default or a way to reset it?
The provided manual is for the ZOSI Z18.5.T.1 camera model, not the ZVR08WN system you mentioned. Therefore, I cannot provide specific instructions for your…
Can I connect the CP PLUS CP-Z44R ezykam Plus camera to Wi-Fi?
Based on the product manual for the CP PLUS CP-Z44R ezykam Plus, this specific model is designed to connect via a 4G SIM Network…
How can I register my Imou Ranger Dual camera if the QR code says it is already registered to another account?
If the Imou Life app indicates that your Ranger Dual (IPC-S2XP-8M0WED) is already registered to another account, it usually means the device was previously…
Is the eufy SoloCam S40 compatible with HomeBase 3?
The eufy SoloCam S40 is primarily designed as a standalone security camera that connects directly to your Wi-Fi network rather than requiring a HomeBase.…
How do I configure the motion detection and light activation settings on my Feit Electric Flood Light Security Camera?
The Feit Electric Flood Light Security Camera is designed to be hardwired for constant power, but its advanced features, including motion-activated lighting, are managed…
How to power off the eufy Security C35 Wireless Security Camera
The provided manual for the eufy Security C35 Wireless Security Camera does not explicitly list a physical power-off button or a specific button sequence…
Why is my ZUMIMALL ZS-GQ2 camera only recording from behind?
If your ZUMIMALL ZS-GQ2 PTZ Security Camera appears to be recording "from behind," it is likely due to the physical orientation of the lens…
How do I reset or recover a lost password for my ZOSI camera system?
To recover or reset your ZOSI camera system password, please follow these steps based on the Z18.5.T.1 manual and standard ZOSI procedures: App Password:…
Why is my ANRAN S02 camera unable to scan the QR code during setup?
If you are having trouble scanning the QR code during the setup of your ANRAN S02 camera, please follow these troubleshooting steps based on…
How can I enable vehicle recognition on my FOAOOD DF220-B camera?
Based on the FOAOOD DF220 manual, the camera uses a PIR (Passive Infrared) sensor and a humanoid algorithm to detect motion. While the manual…
Why is my Tapo C200 camera showing a pink image?
A pink or purple tint on a security camera like the Tapo C200 is usually caused by the IR-Cut filter getting stuck. This filter…
What is the default password for the camera's AP hotspot network (IPC_AP_camera number)?
For ZOSI cameras like the Z18.5.T.1, the default password for the camera's own Wi-Fi hotspot (often appearing as IPC_AP_xxxx) is typically 12345678. Please note…
My camera is no longer working; when I turn it on, a red light flashes and then turns off, and the reset button does not work. What should I do?
Based on the behavior you described for your ANRAN Q3/Q3Max camera, here are the recommended troubleshooting steps: Check the Battery Level: A red light…
What is the maximum SD card capacity supported by the FOAOOD DF220 security camera?
The provided manual for the FOAOOD DF220 security camera does not explicitly state the maximum supported capacity for Micro SD cards. However, it does…
Can I connect the FOAOOD DF220 security camera to my PC?
No, you cannot connect the FOAOOD DF220 security camera to a PC. According to the user manual, the camera is designed specifically for mobile…
Why is my second camera not working, and can nearby motion-activated floodlights interfere with its operation?
While the UPULTRA LB camera is designed to work in various lighting conditions, external motion-activated floodlights can sometimes impact performance, though they usually do…
Where can I find the laptop software for TieJus PTZ cameras?
The TieJus ZS-GQ2 PTZ Security Camera is primarily designed for use with the ZUMIMALL App, which is available for iOS and Android mobile devices.…