Why is the power station not charging from the wall outlet?
If your BLUETTI 716Wh Portable Power Station is not charging from a wall outlet, please check the following steps based on the manual: Check…
Manuals+ Q&A
Power Station questions & answers
Browse answered questions about Power Station, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
Can the power station be managed remotely, and is it possible to set automatic reactivation at a specific charge percentage?
Based on the user guide for the ALLPOWERS AP-SS-009-PRO (S2000 PRO): Remote Management: Yes, the device can be managed remotely via Bluetooth. You can…
Can I use a 100W, 22V solar panel with the Eg010Li power station, and will it cause damage?
Based on the Eg010Li Technical Parameter Table in the user manual, the specifications for solar panel input are as follows: Voltage Range: 15V -…
Why is my IEETek P1800 power station jumping from 30% to 100% during charging and 70% to 0% during discharge?
The behavior you are describing, where the battery percentage jumps significantly during charging and discharging, usually indicates that the Battery Management System (BMS) needs…
What should I do if my BLUETTI Elite 100 V2 cannot be turned off using the power button?
If your BLUETTI Elite 100 V2 is not responding to the power button for shutdown, please follow these steps based on the user manual:…
How do I fix error F14 on my OUKITEL P1000 PLUS power station when it won't charge?
While the OUKITEL P1000 PLUS manual does not explicitly list a code labeled "F14," it provides specific troubleshooting steps for charging failures and overload…
Why is the input power not displayed on the LCD when an additional power supply is connected?
When connecting an additional power supply or power pack to the OYASTORE S5, please ensure you follow these specific steps to ensure the device…
Does the Anker C2000 Solix Gen 2 support its 4000W surge capacity across all AC outlets, or is it limited on specific 120V ports?
Based on the specifications for the Anker Solix C2000 (Gen 2), the unit features a total rated AC output of 2400W with a peak…
How do I set up the app for the IEETek P1800?
Based on the user manual for the IEETek P1800, the device supports Wi-Fi and Bluetooth connectivity (as indicated by the LCD display icons on…
What does error code 51 mean on the Yoobao EN1200Q Portable Power Station?
Based on the available documentation for the Yoobao EN1200Q, specific error codes like '51' are not explicitly listed in the standard troubleshooting table of…
Is there a Windows or mobile app to remotely view the Pecron E3600LFP display screen?
Yes, the Pecron E3600LFP supports remote monitoring via a mobile application. While the manual does not mention a native Windows desktop application, you can…
How do I connect solar panels to the Growatt Infinity 2000 Pro using an XT60i cable and what are the pin specifications?
To properly connect solar panels to the Growatt INFINITY 2000 PRO, follow these instructions based on the user manual: Connection Point: Use the Solar/DC…
How to setup the FlashFish J1000 Plus
To set up and begin using your FlashFish J1000 Plus, follow these steps based on the user manual: Initial Charge: It is highly recommended…
What should I do if my OSCAL PowerMax 1800 won't turn on after a failed firmware update caused by a power outage?
A power interruption during a firmware update can cause the station's operating system to become corrupted, preventing it from turning on. Based on the…
Can I use a TV with the EcoFlow DELTA 3 Classic?
Yes, you can power a television with the EcoFlow DELTA 3 Classic. The power station features standard AC output ports designed to support household…
How does the Growatt Infinity 2000 Pro operate in UPS mode when both AC mains and solar panels are connected?
When the Growatt INFINITY 2000 PRO is connected to both AC mains and solar panels simultaneously, it operates as follows: EPS Mode Activation: The…
What does error code 0011 mean?
The provided manual for the Powerness Hiker U1000 does not explicitly list a numerical error code "0011". However, the device uses specific icons on…
Why does the Dabbsson 1000L show error code 02 when pressing the AC output button, and how can I fix it?
Based on the Dabbsson 1000L manual, error codes are displayed in the Discharge Charge/Error Code section of the LCD screen (labeled 'l' in the…
Why does error code 02 appear when I press the AC output button on my Dabbsson 1000L?
Based on the Dabbsson 1000L manual, specific numerical error codes like "02" are not explicitly listed in the troubleshooting table. However, the manual provides…
Why is the Bluetooth icon missing from the screen and why can't I sync the Aferiy app with my AF-P210 power station?
If the Bluetooth icon is missing from your AFERIY AF-P210 screen and you cannot sync with the app, please try the following troubleshooting steps…
How to properly connect the power station for stationary use in automatic mode?
The Geekbuying APOWER1000 supports a UPS (Uninterruptible Power Supply) function with a switching time of less than 20ms. To use it in this "automatic"…
Why won't my HEPWAY Alpha 2000 connect to my mobile phone via WiFi?
To connect your HEPWAY Alpha 2000 to your mobile phone via WiFi, please follow these steps from the manual: Download the App: Scan the…
Can I use four 500-watt solar panels with the Aferiy AF-P310-EC-H power station?
Based on the technical specifications for the AFERIY AF-P310-EC-H, the device supports solar charging via the XT90 input port. However, the provided manual excerpt…
Why is my OUPES Mega 1 2000W only charging to 55% and not showing any error codes?
If your OUPES Mega 1 is stopping at 55% charge without an error code, please try the following troubleshooting steps based on the manual…