How do I set up two Magboom S1 Ultra speakers for stereo output using an AUX cable from a PC?
To get stereo output from two Magboom S1 Ultra speakers while using an AUX cable, you should utilize the TWS (True Wireless Stereo) pairing…
Manuals+ Q&A
Speaker questions & answers
Browse answered questions about Speaker, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
How do I connect wireless microphones to the ZEALOT MP1 speaker?
Based on the provided user guide for the ZEALOT MP1 Wireless Speaker, there are no specific instructions or mentions of wireless microphone connectivity. The…
Why is my Gemini GXP-T1500 speaker not producing any sound?
If you are not getting any sound from your Gemini GXP-T1500, please check the following troubleshooting steps based on the manual: Check Master Volume:…
How do I proceed with a warranty claim for a microphone that is not working after troubleshooting?
If you have already ensured the microphone is properly inserted into the MIC port and the speaker volume is turned up, but it still…
Why is my wired microphone not working with the SinG-e ZQS8221 speaker even though the microphone light is on and the volume is turned up?
Based on the SinG-e ZQS8221 manual and common troubleshooting for this model, please try the following steps to resolve the microphone issue: Check the…
My microphone is not working; how do I connect it to the SinG-e ZQS8221 speaker?
To connect a microphone to your SinG-e ZQS8221 Portable Speaker, follow these steps based on the user manual: Locate the MIC Port: Find the…
Why does my INSMY speaker keep beeping during songs?
Beeping during playback on an INSMY speaker typically indicates a low battery. When the battery level drops below a certain threshold, the device will…
How do I know when the TG-166 speaker has a low battery?
Based on the manual for the CHENGTAI TG-166, there is no specific visual low-battery indicator light described. However, most portable speakers of this type…
How do I fix a wireless microphone that is paired but not producing sound on the MLOVE S1?
Based on your description, the flashing UHF indicator on the speaker display suggests that while the microphone is powered on, it has not established…
Is there a display or indicator on the JBL Charge 4 when it is charging?
Yes, the JBL Charge 4 features a battery level indicator to show the charging status. While the provided manual text does not detail the…
Can you disable the voice prompts on the speaker?
Based on the provided manual for the Monster MS62120 (S210), there is no mention of a setting or button combination to disable voice prompts.…
How do I increase the volume on the Betron KBS08 speaker, and why is it quieter than my phone?
Based on the Betron KBS08 instruction manual, there are specific ways to handle volume and potential troubleshooting steps for your issue: Long Press for…
My Zealot MP2 microphone is not working; how can I connect my mobile phone to the Zealot MP2 speaker?
To connect your mobile phone to your Zealot speaker (such as the MP2 or S98), follow these standard Bluetooth pairing steps: Power On: Press…
Why are the Power (green) and Signal Limit (red) LEDs flashing together on my HeadRush FRFR-108, and why is there no sound?
According to the HeadRush FRFR-108 manual, the Signal Limit (red) LED lights up when the internal protection circuit is active. If this light is…
How do I install or connect the microphone?
The Sony ULT TOWER 10 comes with a wireless microphone and also supports a wired microphone. Here is how to set them up: Wireless…
Why is my beFree Sound BFS-9160 battery not charging when plugged in?
If your beFree Sound BFS-9160 is not charging, please check the following based on the device's control panel and safeguards: Check the Battery Indicator:…
Where is the battery located in the beFree Sound BFS-9160 and how do I replace it?
The instruction manual for the beFree Sound BFS-9160 does not provide specific steps or a video for battery replacement, as the unit is designed…
Does the Qijiang ZQS4239 Bluetooth Speaker have an AUX port?
According to the official owner's manual for the Qijiang ZQS4239 Bluetooth Speaker, this specific model does include an AUX input port. The manual identifies…
How do I connect the Hoptimist speaker to an iPhone?
To connect your Hoptimist Large Speaker to your iPhone, follow these steps: Turn on the speaker: Long-press the button on the top of the…
How do I adjust the volume on the JF-102 Bluetooth Audio Devil Speaker?
To adjust the volume on the JF-102 Bluetooth Audio Devil Speaker, use the following button controls located on the device: Increase Volume: Long press…
My speaker has been charging for 3 hours but the red light is still on. How do I know when it is fully charged?
According to the boAt Stone 350 Pro manual, the charging behavior is as follows: Charging Indicator: When the speaker is in charging mode, the…
How do I know when the Kinglucky X50 speaker is charging and when it is fully charged?
To charge your Kinglucky X50 Sleeping Pillow Speaker, connect the included charging cable to the Charging Port located on the side of the device.…
Is there audio latency when using the 3.5mm AUX input on the ZEALOT S49?
The ZEALOT S49 features a dedicated AUX mode that can be accessed by pressing the M (Mode) button until the AUX indicator is active.…
The device appears in the Bluetooth list but will not connect.
If you can see the device in your Bluetooth list but cannot connect, please try the following steps based on the user manual: Verify…