Which SD cards are compatible with the reflecta x44-Scan?
The reflecta x44-Scan Slide Scanner is compatible with SD cards that meet the following specifications: Maximum Capacity: Up to 128 GB. File System: The…
Browse answered questions about Scanner, including setup, troubleshooting, compatibility and maintenance.
The reflecta x44-Scan Slide Scanner is compatible with SD cards that meet the following specifications: Maximum Capacity: Up to 128 GB. File System: The…
If your Epson ET-2950 continues to display a 'Paper Out' error after you have added paper to the rear feeder, try the following steps…
The error message "Gerät wurde von anderen aktiviert" (Device has been activated by others) indicates that the serial number of your XTOOL AD20 is…
Yes, the Eyoyo EY-015 barcode scanner supports three connection modes, including Bluetooth SPP (Serial Port Profile). This mode is typically used for serial data…
If you have lost the QR code sticker for your XTOOL AD20 Pro, you can still use the device depending on your situation: If…
If your TOPDON ArtiDiag500 (AD500) has stopped automatically recognizing vehicles after a software update, please try the following troubleshooting steps: Check Connection: Ensure the…
Based on the KONNWEI Bluetooth 5.0 Car Scanner manual, here are several troubleshooting steps to resolve connection and freezing issues with your MAXOBD device:…
Based on the provided manual for the Inateck BCST-47 Barcode Scanner, the specific internal storage capacity (the maximum number of barcodes that can be…
Based on the JOYUSING Book Scanner software manual, the splitting of images is often a feature of the Book Mode, which is designed to…
Based on the user manual for the Creality CR-Scan Ferret, this device does not use a Wi-Fi connection for operation. Instead, it relies on…
If your ANCEL VD500 displays a "LINKING ERROR" or fails to communicate with the ECM, please follow these troubleshooting steps: Check Connection: Ensure the…
To enable the reading of 13+2 digit barcodes (typically EAN-13 with a 2-digit supplement) on your Honeywell Voyager 1250g, you will need to enable…
Based on the provided manual for the Inateck BCST-72, the physical user guide includes configuration barcodes for several languages (US, German, French, Italian, Spanish,…
Based on the provided Quick Reference Guide for the Autel MaxiCOM MK900, this specific model is designed for a wired connection to the vehicle.…
According to the XTOOL AD20 Pro documentation, if your specific vehicle model is not listed in the menu, you should try the following steps:…
To set your HD-201 barcode scanner for continuous reading or to read via the COM interface, you will need to use control codes. The…
The THINKCAR THINKDIAG 2 is a bi-directional scanner that supports All Systems Diagnostics and various maintenance functions, including RESETBMS (Battery Management System reset), which…
Based on the OBDMATE OM507 manual, the device supports GMC-family vehicles (including Buick) and features a Special Functions menu for advanced procedures. While the…
Based on the Inateck BCST23 User Guide, a specific configuration barcode for the Czech language is not included in the standard manual. The manual…
The LAUNCH CRP123 Plus Elite is designed to work with all OBD II compliant vehicles, including 2007 models like the Ford F-150. However, its…
Based on the available documentation for the PNi HAM27 Portable Multiband Radio Scanner, there is no mention of a language selection setting in the…
If your PC is not recognizing the EDIAG YA201 (or related models like the YA101), please try the following troubleshooting steps: Check the USB…
No, the MUCAR CDE900 Pro does not support odometer resetting or mileage correction. This device is designed for vehicle diagnostics, including reading and clearing…
The issue you are describing, where the scanner shows a "device descriptor failure" after a reboot until it is physically replugged, is often related…