What are the dimensions of the Hilti MT-70 girder?
Based on the provided manual for the Hilti MT-70 Girder Hot Dip Galvanized Strut System, specific cross-sectional dimensions for the MT-70 profile are not…
Manuals+ Q&A
HILTI questions & answers
Browse answered questions about HILTI, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
How do I change the units of measurement from feet to meters on the Hilti PD 5?
To change the measuring units (e.g., from feet back to meters) on your Hilti PD 5, follow these steps from the settings menu: Enter…
I have stored my Hilti PD 30 Laser Range Meter for four years with the batteries removed. After installing fully charged batteries, it still won't turn on. Is there a way to reset it?
Based on the Hilti PD 30 operating instructions, there is no dedicated "reset" button or software reset procedure for a device that will not…
Why does my Hilti TE 30-22 not start when the switch is pressed even though the battery LEDs light up?
If your Hilti TE 30-22 does not start but the battery LEDs light up, it indicates the battery is communicating with the tool, but…
How do I remove the foot of the Hilti PMC 46 to change the batteries if it is stuck?
To replace the batteries in the Hilti PMC 46, you must first remove the removable foot (part 4 in the manual diagrams). According to…
Where can I find replacement carbon brushes for the Hilti UH 700 hammer drill?
To find replacement carbon brushes (carvão) for your Hilti UH 700, you should contact Hilti directly or visit an authorized service center. According to…
How do I charge the HILTI SIW 8-22 Cordless Impact Wrench?
To charge the battery of the HILTI SIW 8-22 Cordless Impact Wrench, follow these steps: 1. Before charging the battery, make sure that the…
How do I install the HILTI CFS-B Firestop Bandage?
To install the HILTI CFS-B Firestop Bandage, follow these steps: 1. Prepare the surface: Ensure that the surface where the bandage will be installed…
How do I charge the battery of the HILTI NCT 53 C-22 Aluminium Cordless?
To charge the battery of the HILTI NCT 53 C-22 Aluminium Cordless, follow these steps: 1. Make sure that the contacts on the welding…
How do I charge the HILTI NCR 60 D-22 Dieless 6-Ton crimper Cordless Hydraulic?
To charge the battery of the HILTI NCR 60 D-22 Dieless 6-Ton crimper Cordless Hydraulic, follow these steps: 1. Before charging the battery, make…
Can the HILTI CFS-BL Firestop blocks be used for sealing penetrations for coaxial cables?
Yes, the HILTI CFS-BL Firestop blocks can be used for firestopping penetrations for coaxial cables. The blocks are designed for temporary or permanent passive…
How do I insert and remove the battery in the HILTI SF 6-A22 Cordless Drill Driver?
To insert the battery in the HILTI SF 6-A22 Cordless Drill Driver, follow these steps: 1. Before inserting the battery, make sure that the…
How do I adjust the stroke rate on the HILTI SJD 6-22 Cordless jig saw?
To adjust the stroke rate on the HILTI SJD 6-22 Cordless jig saw, follow these steps: 1. Locate the thumbwheel on the product. The…
How do I determine the appropriate size and installation requirements for the HILTI Stud Anchor Galvanized HST3?
To determine the appropriate size and installation requirements for the HILTI Stud Anchor Galvanized HST3, you need to consider several factors such as the…
How do I install the HILTI HST3 Stud Anchor Galvanized?
To install the HILTI HST3 Stud Anchor Galvanized, please follow the instructions provided in the instruction manual. Here is a step-by-step guide: 1. Determine…
How do I power up the HILTI PS Series X-Scan Concrete Scanner?
To power up the HILTI PS Series X-Scan Concrete Scanner, you have two options. You can either install 4 AAA alkaline batteries (PS 1000/2000)…
How do I insert the battery into the HILTI NUN 54-22 Cordless 6-Ton Cable Crimper?
To insert the battery into the HILTI NUN 54-22 Cordless 6-Ton Cable Crimper, follow these steps: 1. Make sure the product is switched off.…
How do I clean the filter on the HILTI VC 30M Wet and Dry Vacuum Cleaner?
To clean the filter on the HILTI VC 30M Wet and Dry Vacuum Cleaner, follow these steps: 1. Disconnect the supply cord plug from…
How can I attach HILTI Threaded Studs & Standoffs to structural steel and aluminum members?
To properly install HILTI S-BT-MF M8/M10 Threaded Studs & Standoffs, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:…
How do I change the cutting edges on the HILTI NURON NCT 25 S-22 Cordless Cable Cutter?
To change the cutting edges on the HILTI NURON NCT 25 S-22 Cordless Cable Cutter, follow these steps: 1. Turn the cutting head so…
How do I pair the remote control unit with the receiver module?
To pair the remote control unit with the receiver module, follow these steps: 1. Press and hold the operating button on both the remote…
How do I install the HILTI X-FCM-M Grating Fastener Disc?
To install the HILTI X-FCM-M Grating Fastener Disc, please follow these steps: 1. Prepare the grating: Ensure that the grating is clean and free…
How do I properly install the HILTI S-MDW71C Self-Drilling Metal xxxx ?
To properly install the HILTI S-MDW71C Self-Drilling Metal xxxx , please follow the instructions provided in the instruction manual. Here is a step-by-step guide:…
How do I properly use the HILTI S-MDW71C Self-Drilling Metal Screws for drilling into metal?
To properly use the HILTI S-MDW71C Self-Drilling Metal Screws for drilling into metal, please follow these instructions: 1. Preparing the Surface: - Ensure that…