Why do my eFlux wave pumps keep shutting off after a few minutes?
If your eFlux wave pumps are shutting off shortly after setup, please check the following common connection and power issues based on the Orbit…
Manuals+ Q&A
Current questions & answers
Browse answered questions about Current, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
How do I get the override to work in specific rooms using the NX Lighting Controls app?
To troubleshoot why the override is not working in specific rooms while functioning in others, check the following configuration settings in the NX Lighting…
How do I configure the WASP Occupancy Sensor to turn on lights only when motion is detected in a dark area?
To ensure your lights only turn on when motion is detected in a dark area, you should verify the Daylight Sensor settings on your…
What is the part number for the occupancy sensor on the Evolve EWAS A-Series Wall Pack?
The instruction manual for the Current Evolve EWAS A-Series Wall Pack does not list a specific internal part number for the occupancy sensor itself,…
How do I adjust the voltage and current on the Yisung HJS-1000-0-60 power supply?
Adjusting the voltage and current on the Yisung HJS-1000-0-60 power supply is a straightforward process. Here are the step-by-step instructions: 1. Setup: Ensure the…
How do I install the Current 4192 Tank Mount Lighting Bracket on my aquarium?
To install the Current 4192 Tank Mount Lighting Bracket on your aquarium, follow these steps: 1. Ensure that your tank is clean and free…
How do I install the Current 4102 Orbit Marine LED Light on my aquarium?
Installing the Current 4102 Orbit Marine LED Light on your aquarium is a straightforward process. Here are the step-by-step instructions: 1. Prepare the necessary…
How do I enable and disable the boost converter using the EN pin?
To control a boost converter using the EN (Enable) pin, you typically apply a specific voltage level to toggle the device's power state. While…
How do I enable and disable the boost converter using the EN pin?
To enable or disable the boost converter, you can use the EN pin. When the EN pin is set to a logic-high voltage (above…
How do I properly attach and remove the lens on the Occupancy Sensor?
To attach the lens onto the sensor body, follow these steps: 1. Before installation, apply a generous amount of the supplied O-ring lubricant to…
Can I install the SDHQ-13-1540-G13 sliders on a Ford F-150 with a different bed length?
No, the SDHQ-13-1540-G13 sliders are specifically designed to fit 2015+ Ford F-150 and 2017+ Ford Raptor Super Crew models with 5.5' beds only. They…
How do I power the WAC60 Wireless Area Controller?
The WAC60 Wireless Area Controller can be powered using the provided AC power adapter or Power over Ethernet (PoE) supplied by a PoE adapter…
How do I select the lumen and CCT levels for the GE current Lumination LED Luminaire during installation?
To select the lumen and CCT levels for the GE current LRXB Series Lumination LED Luminaire during installation, follow these steps: 1. **Select Lumen:**…
How do I properly install the Arize Element L1000 Gen 2 Horticulture LED Lighting System?
To properly install the Arize Element L1000 Gen 2 Horticulture LED Lighting System, follow these steps: 1. **Read the Installation Guide:** Before beginning the…
How to properly select the lumen and CCT levels for the fixture?
To select the lumen and CCT levels for the IND668 Lumination LRX Gen B Indoor Lighting fixture, follow these steps as outlined in the…
How do I set the right module spacing and brightness for a double-sided cabinet sign with the Tetra Snap DS?
The Tetra Snap DS product offers flexibility in customizing module spacing and brightness levels to suit your specific application. Here's how you can determine…
How can I minimize wind-induced vibration on my light pole system?
To minimize wind-induced vibration on your light pole system, consider the following recommendations outlined in the HLOI0022 Pole Wind Induced Flyer: 1. **Evaluate Risk:**…
How do I know if the LED 2-pin lamp is compatible with my existing ballast?
To determine if the LED 2-pin lamp is compatible with your existing ballast, follow these steps: 1. Check the ballast compatibility list provided by…
How do I determine the appropriate module spacing for the SIGN274 Tetra Snap Outdoor Lighting for optimal?
To determine the appropriate module spacing for optimal brightness and coverage with the SIGN274 Tetra Snap Outdoor Lighting, you can refer to the spacing…
How do I install the Current Element L2000 Horticulture LED Lighting System in my indoor setup?
To properly install the Current Element L2000 Horticulture LED Lighting System, follow these steps: 1. **Pre-Installation Checks:** - Verify that all DC connectors are…
How do I know if the Current LEDL090 Hazardous Rated Lamp is compatible with my existing luminaire?
Before proceeding with the installation of the Current LEDL090 Hazardous Rated Lamp, it is essential to ensure compatibility with your existing luminaire. Here are…
How do I adjust the lumen and color temperature levels of the CBT14 CBT Indoor Lighting?
To adjust the lumen and correlated color temperature levels of the CBT14 CBT Indoor Lighting, follow these steps as outlined in the instructions: 1.…
How do I properly install the WF20 Wall Forms LED Light?
To properly install the WF20 Wall Forms LED Light, follow these steps as outlined in the instruction manual: 1. **Mounting Plate Installation:** - Attach…
How do I properly install the Current LEDL116 B LED Lamp in my fixture?
To properly install the Current LEDL116 B LED Lamp in your fixture, follow these steps as outlined in the installation guide: 1. Before starting,…