Calibrator Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Calibrator products.

Tip: include the full model number printed on your Calibrator label for the best match.

Calibrator manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

OCAL 4.0 Electronic Optical Axis Calibrator User Manual

August 9, 2026
OCAL 4.0 Electronic Optical Axis Calibrator User Manual User Manual OCAL 4.0 Electronic Optical Axis Calibrator New Version Collimator for RC & Newtonian Telescope Collimation Product Overview The OCAL 4.0 Electronic Optical Axis Calibrator is an upgraded digital collimation tool…

Heathkit HD-20 Crystal Calibrator Instruction Manual

June 25, 2026
Heathkit HD-20 Crystal Calibrator Introduction The Heathkit HD-20 Crystal Calibrator is a vintage radio test instrument designed to provide highly accurate frequency reference signals for calibrating radio receivers, transmitters, and communication equipment. Introduced in the early 1960s by Heath Company,…

FLUKE 5730A Multifunction Calibrator Instruction Manual

May 12, 2026
FLUKE 5730A Multifunction Calibrator Product Usage Instructions Operator Safety Summary WARNING: HIGH VOLTAGE is used in the operation of this equipment. LETHAL VOLTAGE may be present on the terminals. Observe all safety precautions! To prevent electrical shock hazard, the operator…

Shenzhen TRX-DT2-BLU Multifunction Calibrator User Manual

April 26, 2026
Shenzhen TRX-DT2-BLU Multifunction Calibrator Product Overview Product Name: Trax Dot 2 Model Number: TRX-DT2-BLU Appearance and Components Power Button: For turning on/off and triggering functions Horn: Emits alert sounds Indicator Light: Shows operational status Electrical Parameters Power Source: User-replaceable CR2032…

FLUKE 5820A Oscilloscope Calibrator Instructions

March 4, 2026
FLUKE 5820A Oscilloscope Calibrator Instructions Change #1 On page 3-54, Table 3-23, delete the 8 the row of the table. Change #2 On page 3-3, under Equipment Required for Calibration and Verification, add the following: Calibration can be completed as…