How do I install the driver for the WAVESHARE USB-CAN-B USB to CAN Adapter on my Windows computer?
To install the driver for the WAVESHARE USB-CAN-B USB to CAN Adapter on your Windows computer, follow these steps based on the user manual provided:
1. For Windows 7, 8, 10, and 11 Systems:
- Connect the USB-CAN-B adapter to your PC using the USB cable.
- Windows should automatically detect the hardware and run an installation wizard.
- If the wizard does not run, go to "Device Manager" and locate the "other devices" section.
- Right-click on the "unknown device" and select "update driver software."
- Manually add the driver by selecting it from the directory where it is located.
- Follow the on-screen instructions to complete the driver installation.
2. For Windows XP:
- Connect the USB-CAN-B adapter to your PC using the USB cable.
- Windows should automatically detect the hardware and run an installation wizard.
- If the wizard does not run, go to "Device Manager" and locate the "other devices" section.
- Right-click on the "Unknown device" and select "Update Driver."
- Manually add the driver by browsing to the directory where it is located.
- Follow the on-screen instructions to complete the driver installation.
3. For USB-CAN-B Tool Software:
- Run and install the USB-CAN-B Tool Setup.exe.
- Make sure to check "run Engine" during the installation.
- Connect the USB interface of the device to your PC via USB.
- Run the "USB-CAN-B Tool.exe" to start using the software for configuring and operating the USB-CAN-B adapter.
By following these steps, you should be able to successfully install the driver for the WAVESHARE USB-CAN-B USB to CAN Adapter on your Windows computer.
Answer this question
Answers are reviewed before publication.