How do I switch between wired and wireless mode on the EPOMAKER EK68 keyboard?

To switch between wired and wireless mode on the EPOMAKER EK68 keyboard, follow these steps:

1. Wired Mode: Toggle the switch on the keyboard to the wired mode. The entire keyboard will flash red three times, indicating that it has successfully entered the wired mode.
2. Wireless Mode: Toggle the switch on the keyboard to the Bluetooth mode. Hold the Fn key along with either the Q, W, or E key for 3-5 seconds until the indicators flash fast in red/green/blue. This indicates that the keyboard is ready to pair.

• Pairing Bluetooth: Turn on your Bluetooth device and search for 'BT Keyboard' to connect. Once the keyboard is connected, the light on the Q/W/E key will stop flashing, indicating a successful connection. Press Fn+Q/W/E to toggle between Bluetooth devices 1/2/3.
• Pairing 2.4GHz Wireless: Insert the 2.4G dongle into your device. Hold the Fn key along with the R key for 3-5 seconds until the light flashes fast in white. The R key will stop flashing white once the connection is established.

Please refer to the EPOMAKER EK68 user guide for more detailed instructions and troubleshooting tips.