How do I pair my Banshee with the remote control?
I have just purchased the AVATAR NFCBA02 Wireless Remote Controller and Banshee. I have turned on both the Banshee and the remote control, but the wings are not flapping when I press the top trigger button on the remote control. I suspect that my Banshee is not paired with the remote control. How can I pair them?
To pair your Banshee with the remote control, please follow these steps:
1. Make sure your Banshee is turned on and the green signal light is on.
2. Place the remote control close to your Banshee.
3. Start with the remote control off. While holding the top trigger button and the figure-eight flight button at the same time, press the on/off button to turn the remote control on. The signal light on the remote control will turn green.
4. Your Banshee's signal light should start flashing, indicating that the pairing was successful.
5. If the pairing fails, please repeat the previous steps.
By following these steps, you should be able to pair your Banshee with the remote control and make the wings flap when you press the top trigger button.
Answer this question
Answers are reviewed before publication.