How do I start and shut down the Wallas PI Thermo Control Panel Stove?
To start the Wallas PI Thermo Control Panel Stove, follow these steps:
1. Press the Power Button for 3 seconds until the yellow power light comes on.
2. Release the button, and the yellow heating light will appear.
3. Wait for approximately 5 minutes until the red combustion light lights up, indicating that the burner flame has been ignited and the combustion has stabilized.
4. The stove will be fully operational about 10 minutes later.
To shut down the stove, follow these steps:
1. Press the Power Button down for 2 seconds.
2. The yellow heating light will shut off immediately, indicating that the stove has been turned off.
Please refer to the Wallas PI Thermo Control Panel Stoves 800 DSL, 85 DT/NDT, 88 DU User Guide for more detailed instructions and information on operating and maintaining the stove.
Answer this question
Answers are reviewed before publication.