How do I match the receiver and transmitter for the Pyle PDWM1980 Compact UHF Wireless Microphone System?
I have purchased the Pyle PDWM1980 Compact UHF Wireless Microphone System and I am unsure how to match the receiver and transmitter. Can you provide step-by-step instructions?
To match the receiver and transmitter for the Pyle PDWM1980 Compact UHF Wireless Microphone System, please follow these steps:
1. Make sure the receiver is powered OFF.
2. On the transmitter side, press and hold the frequency-change button.
3. While holding the frequency-change button, press and hold the power button until the display starts flashing.
4. Turn ON the receiver and you will see the RF light flashing.
- Note: If the receiver has an LED display, turn ON the receiver and wait for 3-5 seconds.
5. Return to the transmitter side and re-press the frequency-change button.
6. The matching is successful if the RF light is ON or the LED display shows the frequency. If not, repeat steps 1 to 5.
By following these steps, you should be able to successfully match the receiver and transmitter for your Pyle PDWM1980 Compact UHF Wireless Microphone System.
Answer this question
Answers are reviewed before publication.