How do I adjust the water pressure on the Kusker Cordless Water Dental Flosser?
I just purchased the Kusker Cordless Water Dental Flosser and I'm not sure how to adjust the water pressure. The manual mentions that it has different modes and a range of water pressure, but I can't find the instructions on how to change it. Can you please provide step-by-step instructions on how to adjust the water pressure?
To adjust the water pressure on the Kusker Cordless Water Dental Flosser, please follow these steps:
1. Make sure the flosser is turned on and functioning properly.
2. Press the mode button on the flosser to cycle through the different modes until you reach the desired mode. The modes include Normal, Soft, Pause, New Person, and DIY.
3. Once you have selected the mode, press and hold the mode button for a few seconds until the water pressure indicator starts flashing.
4. While the water pressure indicator is flashing, use the increase or decrease buttons to adjust the water pressure. The water pressure range is between 30 PSI and 120 PSI.
5. Release the mode button and the water pressure will be set at the selected level.
Note: The DIY mode allows you to freely adjust the water pressure within the range of 30 PSI to 120 PSI. This mode is particularly useful for finding the water pressure that is most comfortable for you.
Please refer to the user manual for more detailed instructions and illustrations on adjusting the water pressure on your Kusker Cordless Water Dental Flosser.
Answer this question
Answers are reviewed before publication.